493201
8
Zoom out
Zoom in
Previous page
1/236
Next page
DIGITAL CAMERA
Reference Manual
En
Thank you for your purchase of a Nikon digital camera. To get
the most from your camera, please be sure to read all instruc-
tions thoroughly and keep them where they will be read by all
who use the product.
Camera Settings
The explanations in this manual assume that default settings are used.
Symbols and Conventions
To make it easier to find the information you need, the following sym-
bols and conventions are used:
The 1, 3, 4, and 2 symbols represent up, down, left, and right on the
multi selector.
Digitutor
“Digitutor”, a series of “watch and learn” manuals in movie form, is avail-
able from the following website:
http://www.nikondigitutor.com/index_eng.html
D
This icon marks cautions; information that should be read before
use to prevent damage to the camera.
A
This icon marks notes; information that should be read before
using the camera.
0
This icon marks references to other pages in this manual.
A For Your Safety
Before using the camera for the first time, read the safety instructions in
“For Your Safety” (0 x–xii).
i
Getting the Most from Your Camera 0 ii
Table of Contents 0 iv
s
Introduction 0 1
z
Auto Mode 0 23
#
t, u, v, and w Modes 0 33
b
Best Moment Capture Mode 0 41
y
Advanced Movie Mode 0 49
9
Motion Snapshot Mode 0 59
t
More on Photography 0 63
I
More on Playback 0 81
Q
Connections 0 91
o
The Playback Menu 0 109
i
The Shooting Menu 0 119
g
The Setup Menu 0 159
n
Technical Notes 0 169
ii
Getting the Most from Your Camera
Take photos with the shutter-release button.
Photos can be taken in any
mode by pressing the shutter-
release button. In Motion Snap-
shot mode(0 59), the camera
will also record a brief movie
vignette.
Shoot movies with the movie-record button.
Movies can be recorded by
pressing the movie-record but-
ton in auto, advanced movie, t,
u, v, and w modes.
Choose
auto mode (0 23) for basic
recording, advanced movie
mode (0 49) for more advanced
techniques.
Create short movies with music.
q Install the supplied software (0 91), w copy photos and
movies to your computer (0 95), and e use Short Movie Cre-
ator to create short movies (0 98).
View short movies in high definition.
q Transfer short movies to the camera (0 99) and use an
HDMI cable to w connect the camera to an HDTV (0 100).
iii
Accessories
Expand your photographic horizons with a wide variety of inter-
changeable lenses, flash units, and other accessories (0 169).
Lenses Flash units
GPS units
Remote
controls
Software for
Nikon digital
cameras
(available on
CD)
Mount
adapters
Wireless
mobile
adapters
iv
Getting the Most from Your Camera ......................................... ii
Accessories .............................................................................................. iii
For Your Safety............................................................................... x
Notices..........................................................................................xiii
Introduction 1
Package Contents..........................................................................1
Parts of the Camera.......................................................................2
The Camera Body ................................................................................... 2
The Monitor.............................................................................................. 4
The $ (Display) Button.................................................................. 5
The Mode Dial ......................................................................................... 7
The Multi Selector .................................................................................. 8
The & (Feature) Button........................................................................ 9
The G Button..................................................................................10
First Steps......................................................................................12
Auto Mode 23
Taking Photos in Auto Mode.....................................................23
Viewing Photographs .................................................................30
Deleting Pictures ..................................................................................31
Recording Movies in Auto Mode ..............................................32
t, u, v, and w Modes 33
Taking Photos in t, u, v, and w Modes ...............................34
t Programmed Auto..........................................................................34
u Shutter-Priority Auto .....................................................................35
v Aperture-Priority Auto ..................................................................36
w Manual................................................................................................37
Recording Movies in t, u, v, and w Modes.........................40
Table of Contents
v
Best Moment Capture Mode 41
Slow View......................................................................................41
Smart Photo Selector..................................................................44
Viewing Photos Taken with the Smart Photo Selector ........47
Choosing the Best Shot ..................................................................... 47
Deleting Pictures.................................................................................. 48
Advanced Movie Mode 49
HD Movies.....................................................................................49
Slow Motion ................................................................................. 53
Viewing Movies ...........................................................................56
Deleting Movies ................................................................................... 57
Motion Snapshot Mode 59
Shooting in Motion Snapshot Mode .......................................59
Viewing Motion Snapshots .......................................................62
Deleting Motion Snapshots............................................................. 62
More on Photography 63
Single-Frame, Continuous, Self-Timer, and
Remote Control Modes......................................................... 63
Continuous Mode................................................................................ 63
Self-Timer and Remote Control Modes ....................................... 65
Exposure Compensation ........................................................... 68
The Built-in Flash.........................................................................69
Choosing a Flash Mode ..................................................................... 70
Optional Flash Units ................................................................... 72
Attaching Flash Units ......................................................................... 72
Taking Pictures ..................................................................................... 73
The GP-N100 GPS Unit ...............................................................76
Attaching the GP-N100...................................................................... 76
Setup Menu Options .......................................................................... 77
The WU-1b Wireless Mobile Adapter ......................................79
vi
More on Playback 81
Photo Information.......................................................................81
Thumbnail Playback ...................................................................84
Calendar Playback.......................................................................85
Playback Zoom.............................................................................86
Deleting Pictures .........................................................................87
Deleting the Current Picture............................................................87
The Playback Menu .............................................................................87
Rating Pictures .............................................................................88
Slide Shows...................................................................................89
Connections 91
Installing the Supplied Software..............................................91
System Requirements.........................................................................93
Viewing and Editing Pictures on a Computer........................95
Transferring Pictures...........................................................................95
Viewing Pictures ...................................................................................96
Creating Short Movies........................................................................98
Viewing Pictures on TV............................................................ 100
High-Definition Devices.................................................................. 100
Printing Photographs .............................................................. 102
Connecting the Printer.................................................................... 102
Printing Pictures One at a Time.................................................... 103
Printing Multiple Pictures............................................................... 104
Creating a DPOF Print Order: Print Set ...................................... 108
The Playback Menu 109
Selecting Multiple Images.............................................................. 111
Image Review ............................................................................ 112
Rotate Tall .................................................................................. 112
Protect ........................................................................................ 112
Rating.......................................................................................... 112
D-Lighting.................................................................................. 113
vii
Resize...........................................................................................114
Crop .............................................................................................115
Edit Movie...................................................................................116
Change Theme...........................................................................117
The Shooting Menu 119
Reset Shooting Options ...........................................................122
Exposure Mode..........................................................................122
Image Quality.............................................................................123
Image Size...................................................................................123
Continuous .................................................................................125
Silent Photography...................................................................125
Number of Shots Saved ...........................................................125
Frame Rate..................................................................................125
Movie Settings ...........................................................................126
Movie Before/After ...................................................................127
File Format..................................................................................128
Metering .....................................................................................128
Autoexposure Lock...........................................................................129
White Balance ............................................................................130
Fine-Tuning White Balance............................................................131
Preset Manual .....................................................................................132
ISO Sensitivity ............................................................................135
Picture Control...........................................................................136
Modifying Picture Controls ............................................................136
Custom Picture Control............................................................140
Edit/Save...............................................................................................140
Load from/Save to Card ..................................................................141
Auto Distortion Control ...........................................................142
Color Space.................................................................................143
Active D-Lighting ......................................................................144
HDR (High Dynamic Range) ....................................................145
viii
Long Exposure NR .................................................................... 146
High ISO Noise Reduction....................................................... 146
Movie Sound Options .............................................................. 147
Vibration Reduction................................................................. 148
Focus Mode................................................................................ 149
Manual Focus...................................................................................... 151
AF-Area Mode ........................................................................... 153
Focus Lock ........................................................................................... 154
Face-Priority .............................................................................. 156
Built-in AF Assist ....................................................................... 156
Flash Control ............................................................................. 157
Flash Compensation ................................................................ 158
The Setup Menu 159
Reset Setup Options ................................................................ 160
Format Memory Card............................................................... 161
Slot Empty Release Lock ......................................................... 161
Display Brightness.................................................................... 161
Grid Display ............................................................................... 162
Auto Power Off.......................................................................... 162
Self-Timer................................................................................... 162
Remote Control......................................................................... 163
Remote on Duration ................................................................ 163
Assign AE/AF-L Button ............................................................ 163
Shutter Button AE Lock ........................................................... 163
Flicker Reduction...................................................................... 164
Reset File Numbering .............................................................. 164
Time Zone and Date................................................................. 165
Language ................................................................................... 165
Auto Image Rotation................................................................ 166
Pixel Mapping ........................................................................... 167
Firmware Version ..................................................................... 167
ix
Technical Notes 169
Optional Accessories ................................................................169
Approved Memory Cards................................................................172
Approved Eye-Fi Cards ....................................................................173
Attaching a Power Connector and AC Adapter......................174
Storage and Cleaning...............................................................176
Storage ..................................................................................................176
Cleaning................................................................................................176
Caring for the Camera and Battery: Cautions......................177
Available Settings .....................................................................181
Defaults.......................................................................................185
Memory Card Capacity.............................................................186
Troubleshooting........................................................................188
Battery/Display ...................................................................................188
Shooting (All Modes)........................................................................189
Shooting (t, u, v, and w Modes).............................................190
Movies....................................................................................................190
Playback ................................................................................................191
Miscellaneous .....................................................................................191
Error Messages...........................................................................192
Specifications.............................................................................195
Nikon 1 V2 Digital Camera..............................................................195
Battery Life ...........................................................................................210
Index ............................................................................................211
x
To prevent damage to your Nikon product or injury to yourself or to others,
read the following safety precautions in their entirety before using this equip-
ment. Keep these safety instructions where all those who use the product will
read them.
The consequences that could result from failure to observe the precautions
listed in this section are indicated by the following symbol:
❚❚WARNINGS
For Your Safety
A
This icon marks warnings. To prevent possible injury, read all warn-
ings before using this Nikon product.
A
Keep the sun out of the frame. Keep the
sun well out of the frame when
shooting backlit subjects. Sunlight
focused into the camera when the
sun is in or close to the frame could
cause a fire.
A
Do not look at the sun through the view-
finder. Viewing the sun or other
strong light source through the view-
finder could cause permanent visual
impairment.
A
Using the viewfinder diopter adjustment
control: When operating the view-
finder diopter adjustment control
with your eye to the viewfinder, care
should be taken not to put your fin-
ger in your eye accidentally.
A
Turn off immediately in the event of mal-
function. Should you notice smoke or
an unusual smell coming from the
equipment or AC adapter (available
separately), unplug the AC adapter
and remove the battery immediately,
taking care to avoid burns. Continued
operation could result in injury. After
removing the battery, take the equip-
ment to a Nikon-authorized service
center for inspection.
A
Do not use in the presence of flammable
gas. Do not use electronic equipment
in the presence of flammable gas, as
this could result in explosion or fire.
A
Do not disassemble. Touching the prod-
uct’s internal parts could result in
injury. In the event of malfunction,
the product should be repaired only
by a qualified technician. Should the
product break open as the result of a
fall or other accident, remove the bat-
tery and/or AC adapter and then take
the product to a Nikon-authorized
service center for inspection.
A
Keep out of reach of children. Failure to
observe this precaution could result
in injury. In addition, note that small
parts constitute a choking hazard.
Should a child swallow any part of
this equipment, consult a physician
immediately.
A
Do not place the strap around the neck of
an infant or child. Placing the camera
strap around the neck of an infant or
child could result in strangulation.
xi
A
Do not remain in contact with the camera,
battery, or charger for extended periods
while the devices are on or in use. Parts of
the device become hot. Leaving the
device in direct contact with the skin
for extended periods may result in
low-temperature burns.
A
Do not aim the flash at the operator of a
motor vehicle. Failure to observe this
precaution could result in accidents.
A
Observe caution when using a flash.
Using the camera with the flash in
close contact with the skin or other
objects could cause burns.
Using a flash close to the subject’s
eyes could cause temporary visual
impairment. Particular care should
be observed when photographing
infants, when the flash should be no
less than one meter (39 in.) from the
subject.
A
Avoid contact with liquid crystal. Should
the displays break, care should be
taken to avoid injury due to broken
glass and to prevent the liquid crystal
from the displays touching the skin or
entering the eyes or mouth.
A
Observe proper precautions when handling
batteries. Batteries may leak or
explode if improperly handled.
Observe the following precautions
when handling batteries for use in
this product:
Use only batteries approved for use
in this equipment.
Do not short or disassemble the
battery.
Be sure the product is off before
replacing the battery.
If you are
using an AC adapter, be sure it is
unplugged.
Do not attempt to insert the battery
upside down or backwards.
Do not expose the battery to flame
or to excessive heat.
Do not immerse in or expose to
water.
Replace the terminal cover when
transporting the battery.
Do not
transport or store the battery with
metal objects such as necklaces or
hairpins.
Batteries are prone to leakage when
fully discharged.
To avoid damage
to the product, be sure to remove
the battery when no charge
remains.
When the battery is not in use,
attach the terminal cover and store
in a cool, dry place.
The battery may be hot immedi-
ately after use or when the product
has been used on battery power for
an extended period.
Before remov-
ing the battery turn the camera off
and allow the battery to cool.
Discontinue use immediately
should you notice any changes in
the battery, such as discoloration or
deformation.
xii
A
Observe proper precautions when handling
the charger:
Keep dry.
Failure to observe this
precaution could result in fire or
electric shock.
Do not short the charger terminals.
Failure to observe this precaution
could result in overheating and
damage to the charger.
Dust on or near the metal parts of
the plug should be removed with a
dry cloth.
Continued use could
result in fire.
Do not go near the charger during
thunderstorms. Failure to observe
this precaution could result in elec-
tric shock.
Do not handle the plug or charger
with wet hands.
Failure to observe
this precaution could result in elec-
tric shock.
Do not use with travel converters or
adapters designed to convert from
one voltage to another or with DC-
to-AC inverters.
Failure to observe
this precaution could damage the
product or cause overheating or fire.
A
Use appropriate cables. When connect-
ing cables to the input and output
jacks, use only the cables provided or
sold by Nikon for the purpose to
maintain compliance with product
regulations.
A
CD-ROMs: CD-ROMs containing soft-
ware or manuals should not be
played back on audio CD equipment.
Playing CD-ROMs on an audio CD
player could cause hearing loss or
damage the equipment.
xiii
No part of the manuals included
with this product may be repro-
duced, transmitted, transcribed,
stored in a retrieval system, or trans-
lated into any language in any form,
by any means, without Nikons prior
written permission.
Nikon reserves the right to change
the specifications of the hardware
and software described in these
manuals at any time and without
prior notice.
Nikon will not be held liable for any
damages resulting from the use of
this product.
While every effort has been made to
ensure that the information in these
manuals is accurate and complete,
we would appreciate it were you to
bring any errors or omissions to the
attention of the Nikon representa-
tive in your area (address provided
separately).
Notice for Customers in Canada
CAUTION
This Class B digital apparatus com-
plies with Canadian ICES-003.
ATTENTION
Cet appareil numérique de la classe B
est conforme à la norme NMB-003 du
Canada.
Notice for Customers in Europe
This symbol indicates that
electrical and electronic
equipment is to be col-
lected separately.
The following apply only to
users in European countries:
This product is designated for sepa-
rate collection at an appropriate col-
lection point. Do not dispose of as
household waste.
Separate collection and recycling
helps conserve natural resources
and prevent negative consequences
for human health and the environ-
ment that might result from incor-
rect disposal.
For more information, contact the
retailer or the local authorities in
charge of waste management.
This symbol on the battery
indicates that the battery is
to be collected separately.
The following apply only to
users in European countries:
All batteries, whether marked with
this symbol or not, are designated
for separate collection at an appro-
priate collection point. Do not dis-
pose of as household waste.
For more information, contact the
retailer or the local authorities in
charge of waste management.
Notices
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
xiv
Notice for Customers in the U.S.A.
Federal Communications Commission (FCC) Radio Frequency Interference Statement
This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC rules. These limits are
designed to provide reasonable pro-
tection against harmful interference in
a residential installation. This equip-
ment generates, uses, and can radiate
radio frequency energy and, if not
installed and used in accordance with
the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particu-
lar installation. If this equipment does
cause harmful interference to radio or
television reception, which can be
determined by turning the equipment
off and on, the user is encouraged to
try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving
antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an out-
let on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced
radio/television technician for help.
CAUTIONS
Modifications
The FCC requires the user be notified
that any changes or modifications
made to this device that are not
expressly approved by Nikon Corpo-
ration may void the users authority to
operate the equipment.
Interface Cables
Use the interface cables sold or pro-
vided by Nikon for your equipment.
Using other interface cables may
exceed the limits of Class B Part 15 of
the FCC rules.
Notice for Customers in the State of California
WARNING: Handling the cord on this
product may expose you to lead, a
chemical known to the State of Cali-
fornia to cause birth defects or other
reproductive harm. Wash hands after
handling.
Nikon Inc., 1300 Walt Whitman Road,
Melville, New York 11747-3064, U.S.A.
Tel.: 631-547-4200
The Battery Charger
IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE
INSTRUCTIONS
DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter
of the proper configuration for the power outlet if needed. This power unit
is intended to be correctly oriented in a vertical or floor mount position.
xv
Notice Concerning Prohibition of Copying or Reproduction
Note that simply being in possession of material that has been digitally cop-
ied or reproduced by means of a scanner, digital camera, or other device may
be punishable by law.
Items prohibited by law from being copied
or reproduced
Do not copy or reproduce paper
money, coins, securities, govern-
ment bonds, or local government
bonds, even if such copies or repro-
ductions are stamped “Sample.
The copying or reproduction of
paper money, coins, or securities
which are circulated in a foreign
country is prohibited.
Unless the prior permission of the
government has been obtained, the
copying or reproduction of unused
postage stamps or post cards issued
by the government is prohibited.
The copying or reproduction of
stamps issued by the government
and of certified documents stipu-
lated by law is prohibited.
Cautions on certain copies and reproduc-
tions
The government has issued cautions
on copies or reproductions of securities
issued by private companies (shares,
bills, checks, gift certificates, etc.), com-
muter passes, or coupon tickets, except
when a minimum of necessary copies
are to be provided for business use by a
company. Also, do not copy or repro-
duce passports issued by the govern-
ment, licenses issued by public
agencies and private groups, ID cards,
and tickets, such as passes and meal
coupons.
Comply with copyright notices
The copying or reproduction of
copyrighted creative works such as
books, music, paintings, woodcuts,
prints, maps, drawings, movies, and
photographs is governed by
national and international copyright
laws. Do not use this product for the
purpose of making illegal copies or
to infringe copyright laws.
Disposing of Data Storage Devices
Please note that deleting images or formatting memory cards or other data
storage devices does not completely erase the original image data. Deleted
files can sometimes be recovered from discarded storage devices using com-
mercially available software, potentially resulting in the malicious use of per-
sonal image data. Ensuring the privacy of such data is the users
responsibility.
Before discarding a data storage device or transferring ownership to another
person, erase all data using commercial deletion software, or format the
device and then completely refill it with images containing no private infor-
mation (for example, pictures of empty sky). Care should be taken to avoid
injury when physically destroying data storage devices.
xvi
AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL
AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH
THE
AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED
BY
A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS
OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS
GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE
OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com
Temperature Warnings
The camera may become warm to the touch during use; this is normal and
does not indicate a malfunction. At high ambient temperatures, after
extended periods of continuous use, or after several photographs have been
taken in quick succession, a temperature warning may be displayed, follow-
ing which the camera will turn off automatically to minimize damage to its
internal circuits. Wait for the camera to cool before resuming use.
Use Only Nikon Brand Electronic Accessories
Nikon cameras are designed to the highest standards and include complex
electronic circuitry. Only Nikon brand electronic accessories (including charg-
ers, batteries, AC adapters, and flash accessories) certified by Nikon specifi-
cally for use with this Nikon digital camera are engineered and proven to
operate within the operational and safety requirements of this electronic cir-
cuitry.
The use of non-Nikon electronic accessories could damage the
camera and may void your Nikon warranty. The use of third-
party rechargeable Li-ion batteries not bearing the Nikon holo-
graphic seal shown at right could interfere with normal operation of the cam-
era or result in the batteries overheating, igniting, rupturing, or leaking.
For more information about Nikon brand accessories, contact a local autho-
rized Nikon dealer.
xvii
D
Use Only Nikon Brand Accessories
Only Nikon brand accessories certified by Nikon specifically for use
with your Nikon digital camera are engineered and proven to operate
within its operational and safety requirements. T
HE USE OF NON-NIKON
ACCESSORIES
COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WAR-
RANTY.
A
Servicing the Camera and Accessories
The camera is a precision device and requires regular servicing. Nikon
recommends that the camera be inspected by the original retailer or a
Nikon-authorized service representative once every one to two years,
and that it be serviced once every three to five years (note that fees
apply to these services). Frequent inspection and servicing are particu-
larly recommended if the camera is used professionally. Any accesso-
ries regularly used with the camera, such as lenses or optional flash
units, should be included when the camera is inspected or serviced.
A
Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or
before taking the camera on a trip), take a test shot to ensure that the
camera is functioning normally. Nikon will not be held liable for dam-
ages or lost profits that may result from product malfunction.
A
Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing prod-
uct support and education, continually-updated information is avail-
able on-line at the following sites:
For users in the U.S.A.: http://www.nikonusa.com/
For users in Europe and Africa: http://www.europe-nikon.com/support/
For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/
Visit these sites to keep up-to-date with the latest product information,
tips, answers to frequently-asked questions (FAQs), and general advice
on digital imaging and photography. Additional information may be
available from the Nikon representative in your area. For contact infor-
mation, visit http://imaging.nikon.com/
xviii
1
s
s
Introduction
Confirm that the package contains the following items:
Memory cards are sold separately.
Package Contents
BS-N3000 multi accessory port
cover
BF-N1000 body cap
Nikon 1 V2 digital camera
EN-EL21
rechargeable
Li-ion battery
(with terminal cover)
MH-28 battery
charger (AC wall
adapter supplied in
countries or regions where
required; shape depends
on country of sale)
UC-E19
USB cable
Lens (supplied only if
lens kit is purchased with
camera; comes with front
and rear lens caps)
AN-N1000 strap
ViewNX 2/Short
Movie Creator CD
Warranty
Users Manual
Reference manual
CD (contains this manual)
2
s
Take a few moments to familiarize yourself with camera controls
and displays. You may find it helpful to bookmark this section
and refer to it as you read through the rest of the manual.
The Camera Body
Parts of the Camera
9
4
5
6
7 8 10 11
3
2
1
17
12
13
14
6
15
16
18
19
20
1 Infrared receiver.........................66, 189
2 Mounting mark ...................................17
3 AF-assist illuminator ...............151, 156
Self-timer lamp ...................................65
Red-eye reduction lamp ...................69
4 Power switch........................................18
5 Shutter-release
button ....................... 26, 42, 45, 51, 60
6 Eyelet for camera strap......................12
7 Power lamp ..........................................18
8 Movie-record button ............32, 40, 50
9 Command dial........................9, 30, 152
10 Mode dial................................................ 7
11 M (flash) button...................................69
12 Focal plane mark (E)......................152
13 Speaker
14 Microphone .......................................147
15 Lens release button..........................203
16 Lens mount ........................................152
17 Body cap .............................................171
18 Multi accessory port cover ........ 72, 76
19 Multi accessory port ................... 72, 76
20 Built-in flash......................................... 69
3
s
The Camera Body (Continued)
* TA-N100 tripod adapter not supported.
1
11
14
10
1213
2 3 4
16
15
6
8
9
7
5
19
18
17
21
20
1 Diopter adjustment control ............... 6
2 Electronic viewfinder........................... 6
3 Eye sensor............................................... 6
4 & (feature) button ............................... 9
5 Monitor ...............................................4, 5
6 Multi selector......................................... 8
J (OK) button....................................... 8
A (AE-L/AF-L)...............129, 155, 163
E (exposure compensation)............68
M (flash mode).....................................70
C (continuous shooting/
self-timer)..................................... 63, 65
7 Memory card access lamp ......... 16, 25
8 Battery-chamber/memory card slot
cover latch........................... 14, 16, 174
9 Power connector cover
for optional power connector......175
10 Battery-chamber/
memory card slot cover... 14, 16, 175
11 Tripod socket
*
12 O (delete) button......................... 31, 87
13 $ (display) button......................... 5
14 Connector cover
15 G (menu) button ........................10
16 K (playback) button............30, 47, 62
17 USB connector.............................. 79, 95
18 HDMI mini-pin connector...............100
19 Connector for
external microphone......................171
20 Memory card slot................................ 14
21 Battery latch......................... 14, 16, 174
4
s
The Monitor
* Available only in detailed display (0 5).
421 3 5 6 7 8 9 10 11
31
29
30
28
32
17
12
13
14
18
2127
222325 2426 20
16
15
19
33
34
35
36
1 Shooting mode ..................................... 7
2 Exposure mode ................................ 122
Live image control..............................28
3 Flexible program indicator ...............34
4 Flash mode ...........................................69
5 Self-timer/remote control mode ....63
Continuous mode
*
.......................... 125
6 Active D-Lighting
*
.......................... 144
7 Picture Control
*
............................... 136
8 White balance
*
................................ 130
9 Movie settings (HD movies)
*
........ 126
Frame rate
(slow motion movies)
*
................. 125
10 Image size
*
....................................... 123
11 Image quality
*
................................. 123
12 Focus mode
*
..................................... 149
13 AF-area mode
*
................................. 153
14 Face-priority
*
..............................27, 156
15 Focus area....................................24, 153
16 AF area brackets
*
............................. 149
17 Flash compensation........................ 158
18 Exposure compensation ...................68
19 Flash-ready indicator .................. 69, 73
20 “K” (appears when memory remains
for over 1000 exposures) .................21
21 Number of exposures remaining....21
Number of shots remaining
before memory buffer fills ..............64
White balance
recording indicator .........................133
Card warning indicator...........161, 192
22 Time available............................... 50, 54
23 ISO sensitivity ....................................135
24 ISO sensitivity indicator...................135
Auto ISO sensitivity indicator ........135
25 Aperture......................................... 36, 37
26 Shutter speed ............................... 35, 37
27 Metering .............................................128
28 Battery indicator
*
...............................21
29 Silent photography
*
........................125
30 HDR ......................................................145
31 GPS connection indicator
*
............... 78
32 Eye-Fi connection indicator
*
.........173
33 Autoexposure (AE)/autofocus (AF)
lock indicator...........................129, 155
34 Microphone sensitivity
*
.................147
35 Time elapsed................................. 50, 54
36 Recording indicator..................... 50, 54
5
s
The $ (Display) Button
❚❚ Shooting ❚❚ Playback
Press $ to cycle through shooting
(0 4) and playback (0 81) indicators as
shown below.
$ button
Simplified display
Detailed display
Monitor off
(viewfinder is not
affected; 0 6)
Simple photo info
Detailed photo info
Image only
6
s
A
The Electronic Viewfinder
Use the viewfinder when bright ambient
lighting conditions make it difficult to see the
display in the monitor. The viewfinder dis-
play turns on when you put your eye to the
viewfinder and is identical to that shown on
page 4; the monitor turns off automatically.
Note that the monitor may turn off and the
viewfinder turn on if you place your finger or
other objects near the eye sensor; avoid cov-
ering the sensor when using the monitor.
To focus the display, use the diopter adjust-
ment control. When operating the control
with your eye to the viewfinder, be careful
not to put your finger or fingernails in your
eye.
A
The Framing Grid
A framing grid can be displayed by selecting
On for Grid display in the setup menu
(0 162).
A
See also
For information on adjusting monitor and viewfinder brightness, see
page 161.
Eye sensor
7
s
The Mode Dial
The camera offers a choice of the follow-
ing shooting modes:
Mode dial
Auto mode (0 23): Let the camera pick the settings for photographs and
movies.
Advanced movie mode (0 49): Choose the
exposure mode for HD movies or shoot
slow-motion movies.
Motion Snapshot mode (0 59): Each time the
shutter is released, the camera records a
still image and about 1.6 s of movie foot-
age. When the resulting “Motion Snap-
shot” is viewed on the camera, the movie
will play back in slow motion over
approximately 4 s, followed by the still
image.
Best moment capture mode (0 41): Choose
the moment to release the shutter as the
scene plays back in slow motion (slow
view), or let the camera choose the best
shot based on composition and motion
(Smart Photo Selector).
t, u, v, and w modes (0 33): Control shutter speed and aperture for
advanced photographic effects.
t: Programmed auto (0 34)
u: Shutter-priority auto (0 35)
v: Aperture-priority auto (0 36)
w: Manual (0 37)
8
s
The Multi Selector
The multi selector and J button are used
to adjust settings and navigate the cam-
era menus.
Multi selector
Settings: A
Lock exposure (0 129) and/or focus (0 154).
Menu navigation: 1
Move cursor up.
Settings:
C
View continuous
shooting/self-timer
menu (0 63).
Menu navigation: 4
Return to previous
menu.
Select highlighted
item.
Settings: E
View exposure com-
pensation menu
(0 68).
Menu navigation: 2
Select highlighted item
or display sub-menu.
Settings: M
View flash mode menu (0 69).
Menu navigation: 3
Move cursor down.
A
The Multi Selector
Items can be highlighted by rotating the multi selector
as shown at right.
9
s
The & (Feature) Button
Live image control (C auto mode; 0 28): Adjust exposure (Bright-
ness control), contrast (Active D-Lighting), or depth of field
(Background softening), or freeze or blur motion (Motion
control). The effects can be previewed in the monitor.
Quick menu access (t, u, v, and w modes; 0 33): Access Metering,
White balance, ISO sensitivity, Picture Control, Focus mode,
and AF-area mode options.
Best moment capture (u best moment capture mode; 0 43): Choose
from Slow view and Smart Photo Selector options.
Advanced movie (v advanced movie mode; 0 52): Choose from
high-definition (HD movie) and slow-motion (Slow motion)
recording.
Theme (z Motion Snapshot mode; 0 61): Choose from Beauty,
Waves, Relaxation, and Tenderness.
The &
button gives access to the features
listed below. Press & to display options
for the current mode, then rotate the
command dial to highlight the desired
option and press the dial to select
(options can also be selected using the
multi selector and J button).
& button
Rating (playback mode; 0 88): Rate pic-
tures.
10
s
The G Button
Most shooting, playback, and setup
options can be accessed from the camera
menus. To view the menus, press the
G button.
G button
Ta bs
Choose from the following menus:
K Playback menu (0 109) B Setup menu (0 159)
C t u v w u z v Shooting menu (0 119)
Menu options
Options in current menu.
Slider shows position in current
menu.
11
s
❚❚ Using the Menus
1
Select a menu.
2
Select an item.
3
Select an option.
Use the multi selector (0 8) to navigate
the menus.
Multi selector
Press 1 or 3 to highlight tabs and
press 2 to position the cursor in the
highlighted menu.
Press 1 or 3 to highlight menu items
and press 2 to view options for the
highlighted item.
Press 1 or 3 to highlight the desired
option and press J to select.
A
Using the Menus
The items listed may vary with camera settings. Items displayed in gray
are not currently available (0 181). To exit the menus and return to
shooting mode, press the shutter-release button halfway (0 26).
12
s
1
Attach the camera strap.
Attach the strap securely to the two camera eyelets.
2
Charge the battery.
Insert the battery into the charger q and plug the charger in
w. An exhausted battery fully charges in about two hours.
Unplug the charger and remove the battery when charging is
complete.
First Steps
A
The Plug Adapter
Depending on the country or region of
purchase, a plug adapter may be sup-
plied with the charger.
The shape of the
adapter varies with the country or region
of purchase. If a plug adapter is supplied,
raise the wall plug and connect the plug
adapter as shown at right, making sure
the plug is fully inserted.
Attempting to forcibly remove the plug
adapter could damage the product.
Battery
charging
Charging
complete
13
s
D
The Battery and Charger
Read and follow the warnings and cautions on pages x–xii and 177–
180 of this manual. Do not use the battery at ambient temperatures
below 0°C (32°F) or above 40°C (104°F); failure to observe this pre-
caution could damage the battery or impair its performance.
Capacity may be reduced and charging times may increase at bat-
tery temperatures from 0°C (32°F) to 15°C (59°F) and from 45°C
(113°F) to 60°C (140°F); the battery will not charge if its tempera-
ture is below 0°C (32°F) or above 60°C (140°F).
Charge the battery at ambient temperatures between 5°C (41°F)
and 35°C (95°F). If the CHARGE lamp flashes quickly during charging,
cease use immediately and take battery and charger to your retailer
or a Nikon-authorized service representative.
Do not move the charger or touch the battery during charging. Fail-
ure to observe this precaution could in very rare instances result in
the charger showing that charging is complete when the battery is
only partially charged. Remove and reinsert the battery to begin
charging again.
Use the charger with compatible batteries only. Unplug when not
in use.
14
s
3
Insert the battery and a memory card.
Check to be sure the battery and card are in the correct orien-
tation. Using the battery to keep the orange battery latch
pressed to one side, slide the battery in until it latches, and
then slide in the memory card until it clicks into place.
Front
15
s
D
Inserting and Removing Batteries and Memory Cards
Always turn the camera off before inserting or removing batteries
or memory cards. Note that the battery may be hot after use;
observe due caution when removing the battery.
A
Formatting Memory Cards
If this is the first time the memory card
will be used in the camera or if the card
has been formatted in another device,
select Format memory card in the setup
menu and follow the on-screen instruc-
tions to format the card (0 161). Note
that this permanently deletes any data the
card may contain. Be sure to copy any
photographs and other data you wish to
keep to a computer before proceeding.
A
The Write Protect Switch
Memory cards are equipped
with a write protect switch to
prevent accidental loss of data.
When this switch is in the “lock”
position, the memory card can
not be formatted and photos can not be deleted or recorded. To
unlock the memory card, slide the switch to the “write” position.
Write-protect switch
16
GB
16
s
A
Removing Batteries and Memory Cards
After turning the camera off, confirm that
the memory card access lamp (
0
3) is off
and open the battery-chamber/memory
card slot cover. To remove the battery, first
release it by pressing the orange battery
latch in the direction shown by the arrow
and then remove the battery by hand.
To remove a memory card, first press the
card in to eject it (q); the card can then
be removed by hand (w).
D
Memory Cards
The camera stores pictures on SD, SDHC, and SDXC memory cards
(available separately; 0 172).
Memory cards may be hot after use. Observe due caution when
removing memory cards from the camera.
Do not remove memory cards from the camera, turn the camera
off, or remove or disconnect the power source during formatting
or while data are being recorded, deleted, or copied to a com-
puter. Failure to observe these precautions could result in loss of
data or in damage to the camera or card.
Do not touch the card terminals with your fingers or metal objects.
Do not bend, drop, or subject to strong physical shocks.
Do not apply force to the card casing. Failure to observe this pre-
caution could damage the card.
Do not expose to water, heat, high levels of humidity, or direct
sunlight.
Do not format memory cards in a computer.
17
s
4
Attach a lens.
Be careful to prevent dust from entering the camera when the
lens or body cap is removed. The lens generally used in this
manual for illustrative purposes is a 1 NIKKOR VR 10–30 mm
f/3.5–5.6. See page 148 for information on vibration reduc-
tion (VR) and page 203 for information on removing lenses.
A
Lenses with Retractable Lens Barrel Buttons
Lenses with retractable lens barrel but-
tons can not be used when retracted. To
unlock and extend the lens, keep the
retractable lens barrel button pressed (q)
while rotating the zoom ring (w). The
lens can be retracted and the zoom ring
locked by pressing the retractable lens
barrel button and rotating the ring in the opposite direction. Be
careful not to press the retractable lens barrel button while attach-
ing or removing the lens.
Keeping marks aligned, position lens on
camera, then rotate until it clicks into place.
Mounting mark
(camera)
Mounting mark (lens)
Mounting mark (lens)
18
s
5
Turn the camera on.
Rotate the power switch to turn the
camera on. The power lamp will
briefly light green and the monitor will
turn on. Be sure to remove the lens
cap before shooting.
A
Turning the Camera Off
To turn the camera off, rotate the power switch again. The monitor
will turn off.
A
Auto Power Off
If no operations are performed for about a minute, the displays will
turn off and the power lamp start to flash (if desired, the delay
before the displays turn off automatically can be changed using the
Auto power off option in the setup menu; 0 162). The camera can
be reactivated by operating the buttons, mode dial, or other camera
controls. If no operations are performed for about three minutes
after the displays have turned off, the camera will turn off automat-
ically.
A
Attaching and Removing Lenses
Turn the camera off before attaching or removing lenses. Note that
when the camera is turned off, the sensor protection barrier in the
lens will close, protecting the camera image sensor.
A
Lenses with Retractable Lens Barrel Buttons
If you are using a lens with a retractable lens barrel button (0 17),
the camera will turn on automatically when the retractable lens bar-
rel lock is released; in addition, if the view through the lens is dis-
played or the monitor is off, the camera will turn off when the lens
barrel is locked (in the case of 1 NIKKOR VR 10–30mm f/3.5–5.6 and
1 NIKKOR VR 30–110mm f/3.8–5.6 lenses, firmware version 1.10 or
later is required if locking the lens barrel is to turn the camera off
when the monitor is off; for information on updating lens firmware,
visit the Nikon website for your area).
19
s
6
Choose a language and set the clock.
A language-selection dialog will be displayed the first time
the camera is turned on. Use the multi selector and J button
(0 11) to choose a language and set the camera clock. Pho-
tos can not be taken until you have set the time and date.
Press 1 or 3 to highlight
language and press J.
Press 4 or 2 to highlight time
zone and press J .
Press 1 or 3 to highlight date
format and press J.
Press 1 or 3 to highlight daylight
saving time option and press J.
Note: The camera uses a 24-hour
clock. Language and clock can be
changed at any time using
Language (0 165) and Time
zone and date (0 165) options in
setup menu.
Press 4 or 2 to select items and
press 1 or 3 to change. Press J
when finished.
20
s
A
The Camera Clock
The camera clock is less accurate than most watches and household
clocks. Check the clock regularly against more accurate time pieces
and reset as necessary.
The camera clock is powered by an independent, rechargeable
power source, which is charged as necessary when the main battery
is installed or the camera is powered by an optional EP-5D power
connector and EH-5b AC adapter (0 174). Three days of charging
will power the clock for about a month. If a message warning that
the clock is not set is displayed when the camera is turned on, the
clock battery is exhausted and the clock has been reset. Set the
clock to the correct time and date.
21
s
7
Check the battery level and memory card capacity.
Check the battery level and number
of exposures remaining in the moni-
tor.
❚❚ Battery Level
❚❚ Number of Exposures Remaining
The monitor shows the number of pictures that can be stored
on the memory card at current settings (values over 1000 are
rounded down to the nearest hundred; e.g., values between
1200 and 1299 are shown as 1.2 k). If a warning is displayed
stating that there is not enough memory for additional
images, insert another memory card (0 14) or delete some
photos (0 87).
Display Description
NO ICON
Battery fully charged or
partially discharged;
level shown by L or
K icon in detailed
display (0 5).
H
Low battery. Ready
fully-charged battery or
prepare to charge
battery.
Cannot take pictures.
Insert fully-charged
battery.
Battery exhausted;
shutter-release
disabled. Insert charged
battery.
Battery level
Exposures remaining
22
s
23
z
z
Auto Mode
Shoot photographs and movies. The camera automatically
adjusts settings to suit the subject.
1
Select auto mode.
2
Ready the camera.
Taking Photos in Auto Mode
Rotate the mode dial to C.
Hold the camera securely with both
hands, being careful not to obstruct
the lens, AF-assist illuminator, or
microphone. Rotate the camera as
shown at lower right when taking pic-
tures in “tall” (portrait) orientation.
Shutter speeds slow when lighting is
poor; use of the built-in flash (0 69) or
a tripod is recommended.
A
Available Settings
For information on the options available in auto mode, see page 181.
24
z
3
Frame the photograph.
4
Focus.
Press the shutter-release button half-
way to focus. If the subject is poorly lit,
the AF-assist illuminator (0 151) may
light to assist the focus operation.
If the camera is able to focus, the selected
focus area will be highlighted in green
and a beep will sound (a beep may not
sound if the subject is moving).
If the camera is unable to focus, the focus
area will be displayed in red. See page
150.
Position your subject in the center of
the frame.
Focus area
25
z
5
Shoot.
Smoothly press the shutter-release
button the rest of the way down to
release the shutter and record the
photograph. The memory card access
lamp will light and the photograph
will be displayed in the monitor for a
few seconds (the photo will automati-
cally clear from the display when the
shutter-release button is pressed half-
way). Do not eject the memory card or
remove or disconnect the power source
until the lamp has gone out and record-
ing is complete.
Memory card access
lamp
A
Taking Several Photographs in Succession
If Off is selected for Image review in the playback menu (0 112), you
can take additional photographs without refocusing by keeping the
shutter-release button pressed halfway between shots.
26
z
A
The Shutter-Release Button
The camera has a two-stage shutter-release button. The camera
focuses when the shutter-release button is pressed halfway. To take the
photograph, press the shutter-release button the rest of the way down.
Focus: Press halfway Shoot: Press the rest
of the way down
A
Automatic Scene Selection
In auto mode, the camera automatically ana-
lyzes the subject and selects the appropriate
scene. The selected scene is shown in the
monitor.
Scene icon
c Portrait: Human portrait subjects.
d Landscape: Landscapes and cityscapes.
f Night portrait: Portrait subjects framed against dark backgrounds.
e Close up: Subjects close to the camera.
g Night landscape: Poorly-lit landscapes and cityscapes.
Z Auto: Subjects that do not fall into the categories listed above.
27
z
A
Using a Zoom Lens
Use the zoom ring to zoom in on the subject so that it fills a larger area
of the frame, or zoom out to increase the area visible in the final photo-
graph (select longer focal lengths on the lens focal length scale to
zoom in, shorter focal lengths to zoom out).
Zoom in
Zoom out
Zoom ring
If you are using an optional lens with a power
drive zoom switch, select T to zoom in and W
to zoom out. The speed with which the cam-
era zooms in and out varies with how far you
slide the switch. The zoom position is shown
by the zoom guide in the display.
Zoom guide
A
Face Priority
The camera detects and focuses on portrait
subjects (face priority). A double yellow bor-
der will be displayed if a portrait subject is
detected facing the camera (if multiple faces,
up to a maximum of five, are detected, the
camera will select the closest subject). Press
the shutter-release button halfway to focus
on the subject in the double yellow border. The border will clear from
the display if the camera can no longer detect the subject (because, for
example, the subject has looked away).
28
z
❚❚ Live Image Control
Live image controls let you preview how
changes to each control will affect the
final photograph. To choose a live image
control for auto mode, press & and use
the command dial. Rotate the dial to
highlight an item and press the dial to
view the effect.
Rotate the command dial to adjust the
selected item. To hide live image con-
trols, press & again.
& button
Command dial
Active D-Lighting: Preserve details in high-
lights and shadows for natural contrast.
Increase effect
Reduce effectActive D-Lighting: High Active D-Lighting: Low
29
z
Background softening: Soften background
details to make your subject stand out, or
bring both background and foreground
into focus.
Sharpen background
Soften background
Background sharp Background softened
Motion control: Suggest motion by blurring
moving objects, or “freeze” motion to
capture moving objects clearly.
Freeze motion
Blur motion
Freeze motion Blur motion
Brightness control: Make pictures brighter
or darker.
Brighter
DarkerBrighter Darker
D
Live Image Control
When live image control is in effect, the built-in flash and optional flash
units can not be used and only one picture will be taken each time the
shutter-release button is pressed all the way down, even if I is
selected in the continuous/self-timer menu.
30
z
To end playback and return to shooting mode, press the shutter-
release button halfway.
Viewing Photographs
Press K to display your most recent pho-
tograph full frame in the monitor (full-
frame playback).
K button
Press 4 or 2 or rotate the multi selector
to view additional pictures.
To zoom in on the center of the current
image, rotate the command dial to the
right (0 86). Rotate left to zoom out. To
view multiple images, rotate the com-
mand dial left when the picture is dis-
played full frame (0 84).
Command dial
A
See Also
For information on toggling photo info on or off, see page 81. See page
89 for information on slide shows.
31
z
Deleting Pictures
To delete the current picture, press O. Note that once deleted, pic-
tures can not be recovered.
1
Display the photograph.
Display the photograph you wish to delete as described on
the preceding page.
2
Press O.
3
Delete the photograph.
A confirmation dialog will be dis-
played.
O button
Press O again to delete the picture and
return to playback, or press K to exit
without deleting the picture.
A
Deleting Multiple Pictures
The Delete option in the playback menu (0 87) can be used to delete
selected pictures, all pictures, or pictures taken on selected dates.
32
z
In auto mode, the movie-record button
can be used to shoot movies with sound
at an aspect ratio of 16 : 9 (the movie
crop is shown in the display). Press the
movie-record button to start and stop
recording.
Recording Movies in Auto Mode
A
Taking Photographs During Recording
Photographs can be taken at any time dur-
ing recording by pressing the shutter-
release button all the way down. Movie
recording is not interrupted.
A
See Also
See page 56 for information on viewing
movies.
Movie-record button
33
#
#
t, u, v, and w Modes
❚❚ Adjusting Settings
In t, u, v, and w modes, the settings below can be accessed
directly from the shooting display. Press the & button and rotate
the command dial to highlight a setting and press the dial to
select.
Once selected, the setting can be
changed by rotating the command dial.
Press the dial again to save changes and
exit to shooting mode.
t, u, v, and w modes offer varying
degrees of control over shutter speed
and aperture. Choose a mode and adjust
settings according to your creative intent.
A
Available Settings
For information on the options available in t, u, v, and w modes, see
page 181.
White balance (0 130)
Focus mode (0 149)
Picture Control (0 136)
Metering (0 128)
AF-area mode (0 153)ISO sensitivity (0 135)
34
#
t Programmed Auto
In this mode, the camera automatically adjusts shutter speed
and aperture for optimal exposure in most situations. This mode
is recommended for snapshots and other situations in which
you want to leave the camera in charge of shutter speed and
aperture.
❚❚ Choosing a Combination of Shutter Speed and Aperture
Although the shutter speed and aperture
chosen by the camera will produce opti-
mal results, you can also choose from
other combinations that will produce the
same exposure (“flexible program”).
Rotate the command dial right for large
apertures (low f-numbers) that blur back-
ground details or fast shutter speeds that
“freeze” motion. Rotate the dial left for
small apertures (high f-numbers) that
increase depth of field or slow shutter
speeds that blur motion. U is displayed
while flexible program is in effect.
Taking Photos in t, u, v, and w Modes
A
Restoring Default Shutter Speed and Aperture Settings
To restore default shutter speed and aperture settings, rotate the com-
mand dial until U is no longer displayed, choose another mode, rotate
the mode dial, or turn the camera off. The default shutter speed and
aperture is automatically restored when the camera enters standby
mode.
Command dial
35
#
u Shutter-Priority Auto
In shutter-priority auto, you choose the shutter speed while the
camera automatically selects the aperture that will produce the
optimal exposure. Use slow shutter speeds to suggest motion by
blurring moving subjects, fast shutter speeds to “freeze” motion.
❚❚ Choosing a Shutter Speed
Rotate the command dial right for faster
shutter speeds, left for slower shutter
speeds. Choose from values between
30 s and
1
/
4000 s. The electronic shutter,
which can be enabled either by selecting
On for Silent photography (0 125) or
by choosing a frame rate of 15, 30, or
60 fps (0 125) in continuous shooting
mode (0 63), supports shutter speeds as
fast as
1
/
16,000 s; the slowest shutter speed
available with the electronic shutter is
30 s (silent photography) or
1
/
60 s (15, 30,
and 60 fps continuous).
Fast shutter speed (
1
/
16 0 0 s) Slow shutter speed (1 s)
A
Continuous Shooting
The selected shutter speed may change
when continuous shooting (0 63) is in effect.
Command dial
36
#
v Aperture-Priority Auto
In aperture-priority auto, you choose the aperture while the
camera automatically selects the shutter speed that will produce
the optimal exposure. Large apertures (low f-numbers) reduce
depth of field, blurring objects behind and in front of the main
subject. Small apertures (high f-numbers) increase depth of
field, bringing out details in the background and foreground.
Short field depths are generally used in portraits to blur back-
ground details, long field depths in landscape photographs to
bring the foreground and background into focus.
❚❚ Choosing an Aperture
Rotate the command dial right for
smaller apertures (higher f-numbers), left
for larger apertures (lower f-numbers).
The minimum and maximum values
depend on the lens currently in use.
Large aperture (f/5.6) Small aperture (f/16)
Command dial
37
#
w Manual
In manual exposure mode, you control both shutter speed and
aperture.
❚❚ Choosing Shutter Speed and Aperture
Adjust shutter speed and aperture with
reference to the exposure indicator (see
below). Shutter speed is set by rotating
the command dial right for faster speeds
and left for slower speeds: choose from
values between 30 s and
1
/
4000 s (30 s and
1
/
16,000 s when the electronic shutter is
enabled by selecting On for Silent pho-
tography, or
1
/
60 s and
1
/
16,000 s when the
electronic shutter is enabled by selecting
a frame rate of 15, 30, or 60 fps in contin-
uous shooting mode; 0 63, 125), or
select “Bulb” or “Time” to hold the shutter
open indefinitely for a long time-expo-
sure. Aperture is selected by rotating the
multi selector clockwise for smaller aper-
tures (higher f-numbers) and counter-
clockwise for larger apertures (lower f-numbers): choose from
values between the minimum and maximum for the lens.
A
Continuous Shooting
The selected shutter speed may change when continuous shooting
(0 63) is in effect.
Command dial
38
#
❚❚ Long Time-Exposures (Manual Exposure Mode Only)
Select the following shutter speeds for
long time-exposures of moving lights,
the stars, night scenery, or fireworks.
Bulb: The shutter remains open while
the shutter-release button is held down.
To prevent blur, use a tripod.
Time: Requires an optional ML-L3
remote control (0 170). Start the expo-
sure by pressing the ML-L3 shutter-
release button. The shutter remains
open until the button is pressed a sec-
ond time.
1
Ready the camera.
Mount the camera on a tripod or place it on a stable, level sur-
face. To prevent loss of power before the exposure is com-
plete, use a fully charged EN-EL21 battery or an optional
EH-5b AC adapter and EP-5D power connector. Note that
noise (bright spots, randomly-spaced bright pixels, or fog)
may be present in long exposures; before shooting, choose
On for Long exposure NR in the shooting menu (0 146).
A
The Exposure Indicator
When shutter speeds other than “Bulb” or “Time” are selected, the
exposure indicator shows whether the photograph would be under- or
over-exposed at current settings.
Optimal exposure Underexposed by
1
/
3EV Overexposed by over 2 EV
39
#
2
Choose a shutter speed.
Select mode w and choose a shutter
speed as follows:
Bulb: Rotate the command dial left
until “Bulb” is selected for shutter
speed.
Time: Rotate the command dial left
until “Bulb” is selected for shutter
speed, and then select # (remote
control mode) for Continuous/self-
timer (0 63).
3
Open the shutter.
Bulb: After focusing, press the shutter-release button all the
way down. Keep the shutter-release button pressed until the
exposure is complete.
Time: Press the ML-L3 shutter-release button all the way down.
The shutter will open immediately or after a two-second
delay.
4
Close the shutter.
Bulb: Take your finger off the shutter-release button.
Time: Press the ML-L3 shutter-release button all the way down.
Shooting ends automatically after two minutes. Note that some
time may be required to record long exposures.
Command dial
40
#
Recording Movies in t, u, v, and w Modes
In t, u, v, and w modes, the movie-
record button can be used to shoot
movies with sound at an aspect ratio of
16 : 9 (the corners of the movie crop are
shown in the display). Press the movie-
record button to start and stop record-
ing. Note that regardless of the mode
selected, movies are recorded using
programmed auto exposure; to adjust
exposure when shooting movies, select
advanced movie mode (0 49).
Movie-record button
A
Taking Photographs During Recording
Photographs can be taken at any time during recording by pressing the
shutter-release button all the way down. Movie recording is not inter-
rupted.
A
See Also
See page 56 for information on viewing movies.
41
b
b
Best Moment Capture Mode
This mode is ideal for fast-changing, hard-to-capture subjects.
Choose when to release the shutter as the scene plays back in
slow motion (slow view), or let the camera choose the best shot
based on composition and motion (Smart Photo Selector).
In this mode, the camera captures a short sequence of still
images and plays them back in slow motion so that you can
choose the precise moment for a photograph. While the shutter-
release button is pressed halfway, the camera records up to 40
frames over about 1.3 s and plays them back in a continuous
slow-motion loop. When the frame you want to keep is dis-
played, press the shutter-release button the rest of the way
down to record the current frame and discard the remaining
images.
1
Select u mode.
Slow View
Rotate the mode dial to u.
A
Available Settings
For information on the options available in best moment capture
mode, see page 181.
42
b
2
Frame the photograph.
3
Press the shutter-release button halfway.
4
View the buffer contents.
Compose the photograph with your
subject in the center of the frame.
The camera will focus (0 24) and then,
over a span of about 1.3 s, record 40
frames to a temporary memory buffer.
Keep the shutter-release button
pressed halfway to play the frames in
the buffer back in a continuous loop
about 6 s long. The position of the cur-
rent frame is shown by a progress indi-
cator.
Progress indicator
A
The Capture Illuminator
The optional SB-N5 flash unit is equipped with a capture illuminator
which lights during buffering (0 74).
43
b
5
Record the desired frame.
❚❚ Choosing a Capture Mode
Press the shutter-release button all
the way down to record the current
frame and discard the remaining
images. To exit without recording a
photograph, release the button with-
out pressing it all the way down.
Pressing the & button in best moment
capture mode displays the following
options. Rotate the command dial to
highlight the desired capture mode and
press the dial to select.
Slow view: Take pictures in slow view
mode (0 41).
Smart Photo Selector: Take pictures using
the Smart Photo Selector (0 44).
& button
44
b
Choose Smart Photo Selector mode to let the camera help you
take photos that capture a fleeting expression on the face of a
portrait subject or other hard-to-time shots such as group pho-
tos in party scenes. Each time the shutter is released, the camera
automatically selects the best shot and a number of best shot
candidates based on composition and motion.
1
Select u mode.
2
Select Smart Photo Selector mode.
Smart Photo Selector
Rotate the mode dial to u.
Press &, then rotate the command dial
to highlight Smart Photo Selector
and press the dial to select.
& button
45
b
3
Frame the photograph.
4
Begin buffering photographs.
Compose the photograph with your
subject in the center of the frame.
Press the shutter-release button half-
way to focus (0 24). An icon will be
displayed as the camera begins
recording images to the memory
buffer. The camera continuously
adjusts focus to account for changes
in the distance to the subject while
the shutter-release button is pressed
halfway.
A
Buffering
Buffering begins when the shutter-release button is pressed halfway
and ends after about 90 seconds or when the shutter-release button is
pressed all the way down.
The optional SB-N5 flash unit is equipped with a capture illuminator
which lights during buffering (0 74). Buffering ends automatically and
the capture illuminator turns off after shooting or if the shutter-release
button is kept pressed halfway for about six seconds.
Shutter-release
button pressed
halfway to focus
Shutter-release button
pressed all the way
down
Shooting ends
Buffering
46
b
5
Shoot.
Smoothly press the shutter-release
button the rest of the way down. The
camera will compare shots recorded
to the buffer both before and after the
shutter-release button was pressed all
the way down, and select five to copy
to the memory card. Note that some
time may be required. The best pic-
ture is displayed in the monitor when
recording is complete.
D
Smart Photo Selector Files
Do not delete the “NCSPSLST.LST” file from the “NCFL folder on the
memory card or change the file names of images taken with the Smart
Photo Selector. The camera will no longer recognize the affected files
as Smart Photo Selector images and will instead handle them as inde-
pendent photographs.
A
See Also
Use the Number of shots saved option in the shooting menu to
choose the number of shots selected by the Smart Photo Selector
(0 125).
47
b
Choosing the Best Shot
Viewing Photos Taken with the Smart Photo Selector
Press K and use the multi selector to
display photographs taken with the
Smart Photo Selector (0 30; pictures
taken with the Smart Photo Selector are
indicated by a y icon). Of the photo-
graphs recorded by the Smart Photo
Selector, only the best shot will be dis-
played (when you press the multi selec-
tor right to view the next picture, the
camera will skip over the best shot can-
didates, with the result that the next pic-
ture displayed will not have a file
number that immediately follows that of
the current picture). To end playback
and return to shooting mode, press the
shutter-release button halfway.
K button
When a photograph taken with the
Smart Photo Selector is displayed, you
can choose the best shot by pressing J.
Press 4 or 2 to view the other pictures
in the sequence and press J to select
the current picture as the best shot. To
return to normal playback, press D.
48
b
Deleting Pictures
Pressing O when a picture taken with the
Smart Photo Selector is selected displays
a confirmation dialog; press O again to
delete the best shot and the best shot
candidates, or press K to exit without
deleting the pictures. Note that once
deleted, pictures can not be recovered.
A
Deleting Individual Photographs
Pressing the O button in the best shot selec-
tion dialog displays the following options;
highlight an option using the multi selector
and press J to select.
This image: Delete the current photo (note
that the picture currently selected as the
best shot can not be deleted).
All except best shot: Delete the best shot candidates, but not picture cur-
rently selected as the best shot.
A confirmation dialog will be displayed; to delete the selected image or
images, highlight Ye s and press J.
A
Best Moment Capture Mode
The camera automatically chooses a scene mode appropriate to the
subject. Movies can not be recorded, and pressing the movie-record
button has no effect. The flash can not be used.
O button
49
y
y
Advanced Movie Mode
Choose this mode to film slow-motion movies or to shoot high-
definition (HD) movies in mode t, u, v, or w.
Record movies with sound at an aspect ratio of 16 : 9.
1
Select advanced movie mode.
2
Frame the opening shot.
HD Movies
Rotate the mode dial to v. An HD
movie crop with an aspect ratio of
16 : 9 will appear in the display.
Frame the opening shot with your
subject in the center of the display.
A
Available Settings
For information on the options available in advanced movie mode, see
page 183.
D
The 0 Icon
A 0 icon indicates that movies can not be recorded.
A
See Also
For information on choosing an exposure mode, see page 122. Frame
size and frame rate options are described on page 126.
50
y
3
Start recording.
4
End recording.
Press the movie-record button to
begin recording. A recording indica-
tor, the time elapsed, and the time
available are displayed while record-
ing is in progress.
A
Audio Recording
Be careful not to cover the microphone
and note that the built-in microphone
may record sounds made by the camera
or lens. By default, the camera focuses
continuously; to avoid recording focus
noise, select a focus mode of AF-S (0 149).
The Movie sound options item in the
shooting menu offers sensitivity and wind
noise options for both built-in and exter-
nal microphones (0 147).
Movie-record button
Recording indicator/
Time elapsed
Time available
Press the movie-record button again
to end recording. Recording will end
automatically when the maximum
length is reached (0 126), the mem-
ory card is full, another mode is
selected, the lens is removed, or the
camera becomes hot (0 xvi).
Movie-record button
A
Maximum Length
At default settings, HD movies can be up to 4 GB in size and 20 min-
utes in length (for more information, see page 126); note that
depending on memory card write speed, shooting may end before
this length is reached (0 172).
A
Focus and Exposure Lock
Focus and exposure will lock while the A (multi selector up) button is
pressed (0 129, 154).
51
y
❚❚ Taking Photographs During HD Movie Recording
Press the shutter-release button all the
way down to take a photograph without
interrupting HD movie recording. Photo-
graphs taken during movie recording
have an aspect ratio of 3 : 2.
A
Taking Photographs During Movie Recording
Up to 20 photographs can be taken with each movie shot. Please note
that photographs can not be taken with slow-motion movies.
52
y
❚❚ Choosing the Movie Type
To choose between high definition and
slow motion recording, press &, then
rotate the command dial to highlight one
of the following options and press the
dial to select:
HD movie: Record movies in HD (0 49).
Slow motion: Record slow-motion movies
(0 53).
& button
D
Recording Movies
Flicker, banding, or distortion may be visible in the displays and in the
final movie under fluorescent, mercury vapor, or sodium lamps or if the
camera is panned horizontally or an object moves at high speed
through frame (flicker and banding can be reduced in HD movies by
choosing a Flicker reduction option that matches the frequency of the
local AC power supply, but note that the slowest shutter speed avail-
able is
1
/
100 s at 50 Hz,
1
/
60 s at 60 Hz; 0 164). Bright light sources may
leave after-images when the camera is panned. Jagged edges, color
fringing, moiré, and bright spots may also appear. When recording
movies, avoid pointing the camera at the sun or other strong light
sources. Failure to observe this precaution could result in damage to
the cameras internal circuitry.
53
y
Record silent movies with an aspect ratio of 8 : 3. Movies are
recorded at 400 fps and play back at 30 fps.
1
Select advanced movie mode.
2
Select slow-motion mode.
3
Frame the opening shot.
Slow Motion
Rotate the mode dial to v.
Press the & button, then rotate the
command dial to highlight Slow
motion and press the dial to select. A
slow-motion movie crop with an
aspect ratio of 8 : 3 will appear in the
display.
& button
Frame the opening shot with your
subject in the center of the display.
54
y
4
Focus.
5
Start recording.
Press the movie-record button to
begin recording. A recording indica-
tor, the time elapsed, and the time
available are displayed while record-
ing is in progress. The camera focuses
on the subject at the center of the dis-
play; face detection (0 27) is not
available and focus and exposure can
not be adjusted.
Movie-record button
Recording indicator/
Time elapsed
Time available
Focus area
55
y
6
End recording.
Press the movie-record button again
to end recording. Recording will end
automatically when the maximum
length is reached, the memory card is
full, another mode is selected, the lens
is removed, or the camera becomes
hot (0 xvi).
A
Maximum Length
Up to 3 seconds or 4 GB of footage can be recorded; note that
depending on memory card write speed, shooting may end before
this length is reached (0 172).
A
See Also
Frame rate options are described on page 126.
Movie-record button
56
y
Movies are indicated by a 1 icon in full-frame playback (0 30).
Press J to start playback.
The following operations can be performed:
Viewing Movies
1 icon/Length
Movie playback indicator/
Current position/total length
Guide Volume
To Use Description
Pause Pause playback.
Play J
Resume playback when the movie is paused
or during rewind/advance.
Advance/
rewind
/
Press 4 to rewind, 2 to advance. Speed
increases with each press, from to 4× to 8×
to 16×. If playback is paused, the movie
rewinds or advances one frame at a time; keep
the button pressed for continuous rewind or
advance. You can also rotate the multi selector
to rewind or advance when playback is
paused.
Adjust
volume
Rotate the command dial to adjust volume.
Return to
full-frame
playback
/K Press 1 or K to exit to full-frame playback.
57
y
Deleting Movies
To delete the current movie, press O. A
confirmation dialog will be displayed;
press O again to delete the movie and
return to playback, or press K to exit
without deleting the movie. Note that
once deleted, movies can not be recovered.
A
See Also
See page 116 for information on trimming
unwanted footage from movies.
O button
58
y
59
9
9
Motion Snapshot Mode
Record brief movie vignettes with your photographs. Each time
the shutter is released, the camera records a still image and
about 1.6 s of movie footage. When the resulting “Motion Snap-
shot” is viewed on the camera, the movie will play back in slow
motion over approximately 4 s, followed by the still image; play-
back is accompanied by a background track about 10 s long.
1
Select Motion Snapshot mode.
2
Frame the picture.
Shooting in Motion Snapshot Mode
Rotate the mode dial to z.
Compose the photograph with your
subject in the center of the frame.
A
Available Settings
For information on the options available in Motion Snapshot mode, see
page 0 183.
60
9
3
Begin buffering.
4
Shoot.
Smoothly press the shutter-release
button the rest of the way down. The
camera will record a photograph,
together with about 1.6 s of movie
footage beginning before and ending
after the time the shutter-release but-
ton was pressed all the way down.
Note that some time may be required.
When recording is complete, the pho-
tograph will be displayed for a few
seconds.
Press the shutter-release button half-
way to focus (0 24). An icon will be
displayed as the camera begins
recording footage to the memory
buffer.
A
Buffering
Buffering begins when the shutter-release button is pressed halfway
and ends after about 90 seconds or when the shutter-release button is
pressed all the way down.
Shutter-release
button pressed
halfway to focus
Shutter-release button
pressed all the way
down
Shooting ends
Buffering
61
9
❚❚ Choosing a Theme
To choose the background music for the
movie, press & and use the command
dial to select from Beauty, Waves, Relax-
ation, and Te nd ern ess. Rotate the com-
mand dial to highlight an option and
press the dial to select.
& button
To play the background music for the
highlighted theme, press the $ but-
ton and use the command dial to adjust
volume.
$ button
A
Motion Snapshot Mode
Live audio is not recorded. Movies can not be recorded using the
movie-record button and the flash can not be used.
The optional SB-N5 flash unit is equipped with a capture illuminator
which lights during buffering (0 74). Buffering ends automatically and
the capture illuminator turns off after shooting or if the shutter-release
button is kept pressed halfway for about six seconds.
A
See Also
See page 127 for information on choosing what portions of the buffer
are included in the movie footage. For information on saving Motion
Snapshots in a format that can be viewed in most movie playback soft-
ware, see page 128.
62
9
Deleting Motion Snapshots
To delete the current Motion Snapshot,
press O. A confirmation dialog will be dis-
played; press O again to delete the photo
and movie and return to playback, or
press K to exit without deleting the file.
Note that once deleted, Motion Snapshots
can not be recovered.
Viewing Motion Snapshots
Press K and use the multi selector to dis-
play a Motion Snapshot (0 30; Motion
Snapshots are indicated by a z icon).
Pressing J when a Motion Snapshot is
displayed plays back the movie portion in
slow motion over a period of about 4 s,
followed by the photo; the background
track plays for about 10 s (to choose a
new background track, use the Change
theme option in the playback menu;
0 117). To end playback and return to
shooting mode, press the shutter-release
button halfway.
K button
O button
63
t
t
More on Photography
Pressing 4 (C) on the multi selector displays a choice of shutter-
release modes for still photography:
Continuous Mode
To take pictures in continuous mode:
1
Display release mode options.
2
Select I.
3
Compose the shot and start shooting.
Single-Frame, Continuous, Self-Timer, and Remote
Control Modes
8 Single frame: The camera takes pictures one at a time.
I
Continuous: The camera takes photographs while the shutter-release
button is pressed. The rate can be selected using the Continuous
option in the shooting menu (0 125).
E Self-timer: Delayed shutter release (0 65).
# Remote control: The shutter is using a remote control (0 65).
Press 4 (C) to display release mode
options.
Highlight I and press J.
The camera takes pictures while the
shutter-release button is held all the
way down.
64
t
D
Continuous Mode
The Continuous option in the shooting menu offers a choice of 5, 15,
30, and 60 fps (0 125). Frame rates of 15, 30, and 60 fps use an elec-
tronic shutter; except when On is selected for Silent photography
(0 125), a mechanical shutter is used at a frame rate of 5 fps. The built-
in flash can be used when 5fps is selected, but only one picture will be
taken each time the shutter-release button is pressed; at settings of 15,
30, and 60 fps, the built-in flash will not fire. At 15 fps, the maximum
number of shots that can be taken in a single burst is about 45, while at
30 and 60 fps the maximum is about 40. For more information, see
page 186.
While photographs are being recorded to the memory card, the mem-
ory card access lamp will light. Depending on shooting conditions and
memory card write speed, recording may take up to about a minute. If
the battery is exhausted before all photographs are recorded, the shut-
ter release will be disabled and the remaining images transferred to the
memory card.
Continuous shooting is not available in best moment capture,
advanced movie, or Motion Snapshot mode, when live image control is
used in auto mode (0 28), or when On is selected for HDR in the shoot-
ing menu (0 145).
A
Buffer Size
The camera is equipped with a memory
buffer for temporary storage, allowing
shooting to continue while photographs are
being saved to the memory card. Up to 100
photographs can be taken in succession;
note, however, that the frame rate will drop
or shooting will pause when the buffer is full.
The approximate number of images that can be stored in the memory
buffer at current settings is displayed while the shutter-release button
is pressed halfway (this number is an approximation only and varies
with shooting conditions). The illustration shows the display when
space remains in the buffer for about 35 pictures.
65
t
Self-Timer and Remote Control Modes
The self-timer and optional ML-L3 remote control (0 170) can be
used to reduce camera shake or for self-portraits.
1
Display release mode options.
2
Select the desired option.
3
Mount the camera on a tripod.
Mount the camera on a tripod or place the camera on a sta-
ble, level surface.
4
Frame the photograph and shoot.
Self-timer mode: Press the shutter-
release button halfway to focus, and
then press the button the rest of the
way down. The self-timer lamp will
start to flash and a beep will begin to
sound. Two seconds before the photo
is taken, the lamp will stop flashing
and the beeping will become more
rapid.
A
Before Using the ML-L3 Remote Control
Before using the remote control for the first time, remove the clear plas-
tic battery-insulator sheet.
Press 4 (C) to display release mode
options.
Use the multi selector to highlight the
desired option and press J.
66
t
Remote control mode: From a distance of
5 m (16 ft) or less, aim the ML-L3 at the
infrared receiver on the front of the
camera (0 2) and press the ML-L3
shutter-release button. If 2s delay is
selected for Remote control in the
setup menu (0 163), the self-timer lamp will light for about
two seconds before the shutter is released. If Quick response
is selected, the self-timer lamp will flash after the shutter has
been released.
Note that the timer may not start or a photograph may not be
taken if the camera is unable to focus or in other situations in
which the shutter can not be released. Turning the camera off
cancels self-timer and remote control modes. Remote control
mode is cancelled automatically if no operations are performed
for about ten minutes after the mode is selected in Step 2.
67
t
A
Movie Mode
In self-timer mode, start and stop the timer by pressing the movie-
record button instead of the shutter-release button. In remote control
mode, the ML-L3 shutter-release button functions as the movie-record
button for advanced movie mode (0 49).
A
Using a Flash
When using the built-in flash, press the N button to raise the flash
before shooting. Shooting will be interrupted if the flash is raised while
the self-timer or delayed-remote timer is counting down.
In remote control mode, the flash starts charging while the camera is
waiting for the signal from the remote. The camera will only respond to
the shutter-release button on the remote control when the flash is
charged. If red-eye reduction (0 69) is used when Quick response is
selected for Remote control in the setup menu (0 163), the shutter
will be released about 1 second after the red-eye reduction lamp lights.
If 2 s delay is selected, there will be about a 2 second delay after the
shutter-release button on the remote control is pressed; the red-eye
reduction lamp will then light for about 1 second before the shutter is
released.
A
See Also
For information on choosing how long the camera will wait for a signal
from the remote, see page 163. See page162 for information on choos-
ing the shutter-release delay in self-timer mode.
68
t
Exposure compensation is used to alter exposure from the value
suggested by the camera, making pictures brighter or darker.
1
Display exposure compensation options.
2
Choose a value.
Normal exposure can be restored by setting exposure compen-
sation to ±0. Except in auto mode, exposure compensation is
not reset when the camera is turned off.
Exposure Compensation
–1 EV No compensation +1 EV
Press 2 (E) to display exposure com-
pensation options.
Use the multi selector to choose from
values between –3 EV (underexpo-
sure) and +3 EV (overexposure) in
increments of
1
/
3 EV. In general, posi-
tive values make the image brighter
while negative values make it darker.
A
Exposure Compensation
Exposure compensation is most effective when used with center-
weighted or spot metering (0 128).
A
Using a Flash
When used with a flash, exposure compensation affects both back-
ground exposure and flash level.
69
t
To use the flash, raise it by pressing the N
button. Charging begins when the flash
is raised; once charging is complete, a
flash-ready indicator (N) will be displayed
when the shutter-release button is
pressed halfway. The following flash
modes are available; choose a flash mode
as described on the following page.
The Built-in Flash
N
Fill flash: The flash fires with every shot. Use when the subject is
poorly lit or with back-lit subjects to “fill in” (illuminate) shad-
ows.
NY
Red-eye reduction: The red-eye reduction lamp lights before the
flash fires, reducing “red-eye” caused by light reflecting from
your subject's retinas.
NYp
Red-eye reduction + slow sync: Combines red-eye reduction with
slow shutter speeds to capture background details at night or
under low light. Use for portraits taken against a backdrop of
night scenery.
Np
Fill flash + slow sync: Combines fill flash with slow shutter speeds
to capture details of poorly-lit backgrounds.
Nr
Rear curtain + slow sync: Combines rear-curtain sync (see below)
with slow shutter speeds to capture poorly-lit background
details.
Nq
Rear-curtain sync: While in other modes the flash fires as the shut-
ter opens, in rear-curtain sync the flash fires just before the
shutter closes, creating streams of light that appear to follow
moving light sources.
A
Lowering the Built-in Flash
To save power when the flash is not in use,
press it gently downward until the latch
clicks into place. Do not use force. Failure to
observe this precaution could result in prod-
uct malfunction.
N button
70
t
Choosing a Flash Mode
1
Display the flash mode options.
Press 3 (N) to display a list of flash
modes. The modes available vary with
the shooting mode (0 7).
2
Select a flash mode.
Auto mode t, v
N Fill flash N Fill flash
NY Red-eye reduction NY Red-eye reduction
NYp
Red-eye reduction +
slow sync
u, w
N Fill flash Np Fill flash + slow sync
NY Red-eye reduction Nr Rear curtain + slow sync
Nq Rear-curtain sync
Use the multi selector to highlight a
flash mode (0 69) and press J to
select.
71
t
A
Using the Built-in Flash
The built-in flash can be used in auto and t, u, v, and w modes only;
note, however, that the flash can not be used with live image control
(0 28) and will not fire when On is selected for HDR in the shooting
menu (0 145), or in I mode (0 63) when a frame rate of 15, 30, or
60 fps is selected for Continuous in the shooting menu (0 125). If the
flash is fired multiple times in quick succession, the flash and shutter
may be temporarily disabled to protect the flash. Shooting can be
resumed after a brief pause.
Objects close to the camera may be overexposed in photographs taken
with the flash at high ISO sensitivities.
To avoid vignetting, remove lens hoods and shoot at ranges of at least
0.6 m (2 ft). Some lenses may cause vignetting at greater distances or
obstruct the red-eye reduction lamp, interfering with red-eye reduc-
tion. The following illustrations show the effect of vignetting caused by
shadows cast by the lens when the built-in flash is used.
Shadow Shadow
A
Aperture, Sensitivity, and Flash Range
Flash range varies with sensitivity (ISO equivalency) and aperture. With
the standard zoom lens at maximum aperture and ISO sensitivity set to
ISO 160 to 6400, the range is approximately 0.6 m–7.0 m (2 ft–23 ft)
when the lens is zoomed all the way out, 0.6 m–4.2 m (2 ft–13.8 ft) at
maximum zoom.
A
See Also
See page 157 for information on flash control, or page 158 for informa-
tion on adjusting flash level.
72
t
In still image mode, optional flash units for Nikon 1 cameras can
be used for lighting effects such as bounce-flash photography
or, when an optional SB-N5 flash unit is attached, to provide cap-
ture illumination in best moment capture and Motion Snapshot
modes. The built-in flash does not fire when an optional flash
unit is attached.
In the instructions that follow, the optional SB-N5 flash unit is
used for illustrative purposes.
Attaching Flash Units
Mount optional flash units on the camera multi accessory port.
1
Remove the multi accessory port cover.
2
Attach the flash unit.
Optional Flash Units
Remove the cover as shown at right.
Keep the cover in a safe place and
replace it when the port is not in use.
Turn the camera off and mount the
flash unit on the multi accessory port
as described in the manual provided
with the flash unit.
A
Supported Flash Units
The camera supports only flash units designated for use with Nikon 1
cameras.
73
t
Taking Pictures
Follow the steps below to take pictures with the flash.
1
Turn the camera and flash unit on.
2
Choose a flash mode.
Choose a flash mode as described on page 70.
3
Position the flash head.
4
Take pictures.
Rotate the flash head so that it points
directly ahead.
Before shooting, confirm that the flash
status indicator on the rear of the flash
unit is lit and that the flash-ready indi-
cator (N) appears in the camera dis-
play. To take pictures without the
flash, turn the flash unit off.
Flash status indicator
Capture-illuminator
status indicator
A
See Also
See page 157 for information on flash control, or page 158 for informa-
tion on adjusting flash level.
74
t
❚❚ Bounce Lighting
Light from the flash can be “bounced” (reflected) from a ceiling
or wall, diffusing the light from the flash to make shadows less
harsh and reduce glare from hair, skin, clothing and foreground
objects.
Flash head rotated upward 90 °
(bounce lighting)
Flash pointed directly ahead
(normal lighting)
A
Bounce Lighting
If possible, bounce flash lighting from a reflective white or near-white
surface; light reflected from other surfaces may change the colors in
the photograph. If no suitable surface can be found nearby, a piece of
white paper (A4 or letter sized) can be used instead, but be sure to
check the results in the camera display.
A
The Capture Illuminator
The optional SB-N5 flash unit offers a capture
illuminator that lights to illuminate subjects
in best moment capture and Motion Snap-
shot modes (0 41, 59). In Smart Photo Selec-
tor and Motion Snapshot modes, the
illuminator will light for about 6 seconds dur-
ing buffering, illuminating subjects about
1 m (3.3 ft) from the camera. In slow view, the illuminator will light for
about 1.3 seconds, starting when the shutter-release button is pressed
halfway. Before shooting, confirm that the capture-illuminator status
indicator is lit. The indicator lights during buffering.
75
t
A
Optional Flash Units
Detailed instructions may be found in the manual provided with the
flash unit. Optional flash units can be used in auto and t, u, v, and w
modes only; note, however, that the flash can not be used with live
image control (0 28) and will not fire when On is selected for HDR in
the shooting menu (0 145), or in I mode (0 63) when a frame rate of
15, 30, or 60 fps is selected for Continuous in the shooting menu
(0 125).
A
The Flash/Capture-Illuminator Status Indicators
If the flash status or capture-illuminator status indicator on the rear of
the SB-N5 flashes, one of the following errors may have occurred:
Display Description
The flash status indicator flashes
for about 3 seconds after a photo-
graph is taken.
The flash has fired at full power and the
photograph may be underexposed. Try
reducing the distance to the subject or
increasing ISO sensitivity (0 135).
The flash or capture status indica-
tor flashes once a second.
Continuous use has caused the tempera-
ture of the flash unit to rise and the unit
has been disabled to protect the flash.
Turn the unit off and wait for it to cool.
The flash and capture status indi-
cators flash once every 2 seconds.
A data transfer error has occurred. Check
that the flash unit is correctly attached.
The flash status indicator flashes 8
times a second.
An error has occurred in the unit’s inter-
nal circuitry. Turn the camera off, remove
the flash unit, and take the camera and
flash unit to a Nikon-authorized service
center for consultation.
76
t
GP-N100 GPS units (available separately) can be used to record
information on your current position when pictures are taken.
This information can be viewed on a computer using ViewNX 2
(supplied) or Capture NX 2 (available separately; 0 171).
ViewNX 2 can be installed from the supplied ViewNX 2/
Short Movie Creator CD.
Attaching the GP-N100
The GP-N100 attaches to the camera multi accessory port.
1
Remove the multi accessory port cover.
2
Attach the GP-N100.
The GP-N100 GPS Unit
Remove the cover as shown at right.
Keep the cover in a safe place and
replace it when the port is not in use.
Turn the camera off and mount the
GP-N100 on the multi accessory port
as described in the manual provided
with the GPS unit.
77
t
Setup Menu Options
Auto power off: Choose whether the displays turn off automati-
cally when the GP-N100 is attached.
Position: This item is only available if the GP-N100 is currently
receiving GPS data, when it displays the current latitude, longi-
tude, altitude, Coordinated Universal Time (UTC), and expiry
date for Assisted GPS data (0 78) as reported by the GP-N100.
Use GPS to set clock: Select Ye s to synchronize the camera clock
with the time reported by the GPS device.
The GPS item in the setup menu contains the following options.
To display GPS options, press G and select GPS in the setup
menu.
Enable
Camera displays turn off automatically if no operations are
performed for the time selected for Auto power off in the
setup menu (0 162). This reduces the drain on the battery.
Disable
The displays do not turn off automatically while the
GP-N100 is attached.
A
Coordinated Universal Time (UTC)
UTC data is provided by the GPS device and is independent of the cam-
era clock.
78
t
A
Connection Status
Connection status is shown by the h icon in the camera display (0 4)
and the LED on the GP-N100:
h icon LED Description
h (flashes)
Flashes
(red)
The GPS unit is searching for a signal. Pictures
taken while the h icon is flashing do not
include GPS data.
h (static)
Flashes
(green)
The unit is receiving signals from three GPS
satellites. GPS data will be recorded with pho-
tographs.
h (static)
On
(green)
The unit is receiving signals from four or more
GPS satellites. More precise GPS data will be
recorded with photographs.
GPS data are only recorded while the GP-N100 is receiving signals from
at least three satellites. If no signal is received for over two seconds, the
h icon will clear from the camera display and no GPS data will be
recorded.
A
Assisted GPS
When connected to a computer using its supplied USB cable, the
GP-N100 can use resources provided by Nikon servers to reduce the
time needed to acquire GPS data (GPS data can still be acquired with-
out these resources, although the time needed to do may increase).
This method of determining position using supplementary informa-
tion stored in a file supplied by a network is known as “Assisted GPS”
(A-GPS or aGPS). To connect to Nikon servers and receive Assisted GPS
files, the GP-N100 uses GP-N100 Utility software, available for down-
load from the following website:
http://nikonimglib.com/gpn100u/
For information on using GP-N100 Utility, see the above website or
online help. The Assisted GPS file provided by the servers is valid for
two weeks, after which time it can no longer be used to assist global
positioning. Use GP-N100 Utility regularly to keep the GP-N100 up to
date.
79
t
Attach an optional WU-1b wireless mobile adapter to the cam-
era USB connector to copy images to, or control the camera
from, smartphone or tablet devices running the Wireless Mobile
Utility app.
1
Connect the WU-1b.
2
Activate the adapter.
3
Launch the Wireless Mobile Utility.
Launch the Wireless Mobile Utility on the smart device.
The WU-1b Wireless Mobile Adapter
After removing the rubber cap from
the WU-1b USB connector, turn the
camera off and attach the adapter to
the camera USB connector.
Select Wireless mobile adapter in
the setup menu (0 159). A confirma-
tion dialog will be displayed; select
Ye s to activate the WU-1b, allowing
wireless connection to smart devices,
or No to deactivate the WU-1b and
prevent wireless connection.
D
Using the WU-1b for the First Time
After connecting the WU-1b, you will need to adjust smart device
wireless settings. See the WU-1b manual for more information.
Reset
file
numbering
Time zone and date
Firmware version
Activate the wireless
mobile adapter?
Yes
No
80
t
4
Take pictures remotely.
Once a wireless connection is estab-
lished, the smart device will display
the view through the camera lens; the
camera will display a message stating
that a wireless connection is active.
D
Wireless Networks
Camera settings can not be adjusted while the camera is connected to
a wireless network. To end the connection, press the G button.
A
The Wireless Mobile Utility
The Wireless Mobile Utility is available from Google Play and the App
Store. System requirements and Information on installation, wireless
connections and use may be found in the Wireless Mobile Utility man-
ual available in pdf format from the following URL:
http://nikonimglib.com/ManDL/WMAU/
Reset
file
numbering
Time zone and date
Firmware version
Wireless mobile
adapter active
End
81
I
I
More on Playback
❚❚ Simple Photo Information
Photo Information
Photo information is superimposed on
images displayed in full-frame playback
(0 30). Press the $ button to cycle
through simple photo information,
detailed photo information (0 82), and
no photo information.
$ button
Still images Movies
1 2
3
9
10
4
8
7
5
6
212
11
13
1
3
9
10
4
8
7
5
6
1 Shooting mode ..................................... 7
2 Protect status .....................................112
3 Frame number/total number of
images
4 Image quality.....................................123
Frame rate...........................................125
5 Image size...........................................123
Frame size...........................................126
6 File name ............................................124
7 Time of recording ...................... 19, 165
8 Date of recording....................... 19, 165
9 Battery indicator .................................21
10 Rating .................................................... 88
11 Movie length........................................ 56
12 Audio recording indicator...............147
13 On-screen guide (for movies)..........56
A
Thumbnail Playback
Press $ to view or hide photo info when thumbnails are displayed
(0 84).
82
I
❚❚ Detailed Photo Information
Still images
Movies
1 234
7
6
5
8
13
12
14
15
16
9
1011
30
19
20
21
27
28
29
25 2326 22
24
17 18
30
27
28
25 2326 22
24
1 2 4
6
5
13
12
31 18
14
29
19
3
1 Shooting mode ..................................... 7
2 Frame number/total number of
images
3 Protect status.....................................112
4 Camera name
5 Retouch indicator ...........113, 114, 115
Movie edit indicator.........................116
6 Histogram showing distribution of
tones in image ...................................83
7 ISO sensitivity ....................................135
8 Focal length .......................................201
9 Flash mode...........................................69
10 Flash control.......................................157
11 Flash compensation.........................158
12 Exposure compensation ................... 68
13 Metering .............................................128
14 Exposure mode .................................122
15 Shutter speed ............................... 35, 37
16 Aperture......................................... 36, 37
17 Auto distortion control....................142
18 GPS data indicator.............................. 76
19 Picture Control ..................................136
20 Active D-Lighting indicator............144
21 HDR ......................................................145
22 Image quality.....................................123
Frame rate .................................125, 126
23 Image size...........................................123
Frame size..................................125, 126
24 File name ............................................124
25 Time of recording ...................... 19, 165
26 Date of recording....................... 19, 165
27 Battery indicator ................................. 21
28 White balance....................................130
White balance fine-tuning .............131
29 Color space.........................................143
30 Rating .................................................... 88
31 Audio recording indicator ..............147
83
I
A
Histograms (0 82)
Camera histograms are intended only as a guide and may differ from
those in imaging applications. Sample histograms are shown below:
If brightness varies evenly across the
image, the distribution of tones
will be relatively even.
If the image is dark, tone distribu-
tion will be shifted to the left.
If the image is bright, tone distribu-
tion will be shifted to the right.
Exposure compensation shifts the distribution of tones to the right
when raised, to the left when lowered. Histograms can give you a
rough idea of overall exposure when bright ambient lighting makes it
difficult to see the display in the monitor.
84
I
The following operations can be performed:
Thumbnail Playback
To view pictures in “contact sheets” of 4,
9, or 72 images, rotate the command dial
left when a picture is displayed full frame.
Command dial
Full-frame
playback
Calendar
playback
Thumbnail playback
To Use Description
Display more
images
Rotate left to increase the number of images
displayed, right to decrease. Rotate left
when 72 images are displayed to view
images taken on selected dates (
0
85).
Rotate right when 4 images are displayed to
view the highlighted image full frame.
Display fewer
images
Highlight images
/
Use the multi selector to highlight images.
You can delete (0 87) or rate (0 88) the
highlighted image or zoom in for a closer
look (0 86).
View highlighted
image
J
Press J to view the highlighted image full
frame.
Delete highlighted
image
O
See page 87.
Rate highlighted
image
&
See page 88.
85
I
The following operations can be performed:
Calendar Playback
To view pictures taken on a selected date,
rotate the command dial left when 72
pictures are displayed (0 84).
Command dial
Full-frame
playback
Calendar playback
Thumbnail playback
To Use Description
Highlight date
/
Use multi selector to highlight date.
View pictures taken
on highlighted date
J
Press J to view the first picture
taken on the highlighted date.
Delete pictures taken
on highlighted date
O
Press O to delete all pictures taken on
the highlighted date.
Exit to thumbnail
display
Rotate right to return to 72-frame dis-
play.
86
I
The following operations can be performed:
Playback Zoom
To zoom in on a photograph, display it
full frame and rotate the command dial
right. Playback zoom is not available with
movies or Motion Snapshots.
Command dial
To Use Description
Zoom in or
out
Rotate the command dial
right to zoom in, left to
zoom out. Whenever you
zoom in or out, a naviga-
tion window will appear
with the area currently
visible in the display indi-
cated by a yellow border. Press 1, 2, 3, or 4 to
scroll the image.
View other
areas of
image
View faces
Faces (up to five)
detected during
face pri-
ority
are indicated by
white borders in the nav-
igation window. Rotate
the multi selector to view
other faces.
Exit zoom
J
Return to full-frame playback.
87
I
Pictures can be deleted from the memory card as described
below. Note that once deleted, pictures can not be recovered;
protected images, however, will not be deleted.
Deleting the Current Picture
The Playback Menu
To delete multiple images, press the G button, select Delete
in the playback menu, and choose from the options below. A
confirmation dialog will be displayed; select Ye s to delete the
images (note that some time may be required if a large number
of images is selected).
Deleting Pictures
To delete the picture currently displayed
in full-frame playback or selected in the
thumbnail list, press O. A confirmation
dialog will be displayed; press O again to
delete the picture and return to playback,
or press K to exit without deleting the
picture.
O button
Delete selected images
Highlight images and press 1 or 3 to select or
deselect (0 111). Press J to exit when the selec-
tion is complete.
Select images by date
Highlight dates and press 2 to select or deselect.
To view the pictures taken on the highlighted
date, rotate the command dial right; rotate the
dial left to return to the date list. Press J to delete
all pictures taken on the selected dates.
Delete all images Delete all pictures on the memory card.
88
I
Rate pictures or mark them as candidates for later deletion. Rat-
ing is not available with protected images.
1
Select a picture.
Display a picture in full-frame playback or highlight it in the
thumbnail list.
2
Press &.
Rating Pictures
Press & and rotate the multi selector
to choose from ratings of zero to five
stars, or select ) to mark the picture
as a candidate for later deletion.
& button
89
I
1
Select the type of image used in the show.
Highlight the desired option and press J.
2
Adjust display times and choose a background track.
Adjust the following options:
Slide Shows
To view a slide show of the pictures on
the memory card, press the G button,
select Slide show in the playback menu,
and follow the steps below.
G button
All images Display all the images on the memory card.
Still images Display still images only.
Movies Display movies only.
Motion Snapshot
Display only the movie portion of Motion Snapshots.
The associated photographs are not displayed.
Select images by
date
Display only images
recorded on a selected
date. A calendar will be
displayed; use the multi
selector to highlight a
date.
Frame interval Choose how long each still image is displayed.
Movie playback
time
Choose how much of each movie is played back
before the next slide is displayed. Choose Same as
frame interval to display the next slide after the
time selected for Frame interval, No limit to play
back the entire movie before displaying the next
slide.
Audio
Mute audio playback or choose a slide show back-
ground track. Select Movie sound tracks to play
only audio recorded with movies; in this case, no
sound is played for still images or Motion Snapshots.
90
I
3
Select Start.
The following operations can be performed while a slide
show is in progress:
The options shown at right are dis-
played when the show ends. Select
Resume to restart or Exit to exit to the
playback menu.
Highlight Start and press J to start
the slide show.
To Use Description
Skip back/skip
ahead
Press 4 to return to the previous frame, 2
to skip to the next frame.
Pause/resume J Pause the show. Press again to resume.
Adjust volume Rotate the command dial to adjust volume.
Exit to playback
mode
K
End the show and return to playback
mode.
91
Q
Q
Connections
Install the supplied software to copy pictures to your computer
for viewing and editing pictures and creating short movies.
Before installing the software, confirm that your system meets
the requirements on page 93.
1
Start the computer and insert the installer ViewNX 2/
Short Movie Creator CD.
2
Select a language.
If the desired language is
not available, click Region
Selection to choose a dif-
ferent region and then
choose the desired lan-
guage (region selection is
not available in the Euro-
pean release).
Installing the Supplied Software
Windows Mac OS
Double-click icon
on desktop
Double-click
Welcome icon
q Select region (if required)
w Select language e Click Nex
t
92
Q
3
Start the installer.
Click Install and follow the
on-screen instructions.
4
Exit the installer.
Click Ye s (Windows) or OK (Mac OS) when installation is com-
plete.
The following software is installed:
ViewNX 2
Short Movie Creator
Apple QuickTime (Windows only)
5
Remove the installer CD from the CD-ROM drive.
Windows Mac OS
Click Ye s Click OK
A
Supplied Software
Be sure to update to the latest versions of the supplied software. Nikon
Message Center 2 will periodically check for updates while the com-
puter is connected to the Internet.
Click Instal
l
93
Q
System Requirements
The system requirements for ViewNX 2 are:
Windows
CPU
Photos/JPEG movies: Intel Celeron, Pentium 4, or Core series, 1.6
GHz or better
H.264 movies (playback): 3.0 GHz Pentium D or better
H.264 movies (editing): 2.6 GHz Core 2 Duo or better
OS
Pre-installed versions of Windows 7 Home Basic/Home Premium/
Professional/Enterprise/Ultimate (64- and 32-bit editions; Service Pack 1),
Windows Vista Home Basic/Home Premium/Business/Enterprise/
Ultimate (64- and 32-bit editions; Service Pack 2), or Windows XP Home
Edition/Professional (32-bit editions only; Service Pack 3)
RAM
Windows 7/Windows Vista: 1 GB or more (2 GB or more recommended)
Windows XP: 512 MB or more (2 GB or more recommended)
Hard-disk
space
A minimum of 500 MB available on the startup disk (1 GB or more rec-
ommended)
Monitor
Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels/SXGA
or more recommended)
Color: 24-bit color (True Color) or more
Mac OS
CPU
Photos/JPEG movies: Intel Core or Xeon series
H.264 movies (playback): 2 GHz Core Duo or better
H.264 movies (editing): 2.6 GHz Core 2 Duo or better
OS Mac OS X version 10.6.8, 10.7.5 or 10.8.2
RAM 512 MB or more (2 GB or more recommended)
Hard-disk
space
A minimum of 500 MB available on the startup disk (1 GB or more rec-
ommended)
Monitor
Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels/SXGA
or more recommended)
Color: 24-bit color (millions of colors) or more
A
Motion Snapshots
ViewNX 2 is required to view Motion Snapshots saved using the File
format > NMS files option in the shooting menu (0 128).
94
Q
The system requirements for Short Movie Creator are:
If your system does not meet the above requirements, only
ViewNX 2 will be installed (0 93).
Windows
CPU 2 GHz intel Core 2 Duo or better
OS
Pre-installed versions of Windows 7 Home Basic/Home Premium/
Professional/Enterprise/Ultimate (Service Pack 1), Windows Vista
Home Basic/Home Premium/Business/Enterprise/Ultimate (Service
Pack 2), or Windows XP Home Edition/Professional (Service Pack 3). All
installed programs run as 32-bit applications in 64-bit editions of
Windows 7 and Windows Vista.
RAM
1.5 GB or more with at least 128 MB of video RAM (2 GB or more
with at least 256 MB of video RAM recommended for creating HD movies)
Hard-disk
space
A minimum of 500 MB available on the startup disk (1 GB or more rec-
ommended)
Monitor
Resolution: 1024 × 768 pixels (XGA) or more
Color: 32-bit color (True Color) or more
Other DirectX 9 or later and OpenGL 1.4 or later
Mac OS
CPU 2 GHz intel Core 2 Duo or better
OS Mac OS X version 10.6.8, 10.7.5 or 10.8.2
RAM 1GB or more
Hard-disk
space
A minimum of 500 MB available on the startup disk (1 GB or more rec-
ommended)
Monitor
Resolution: 1024 × 768 pixels (XGA) or more
Color: 24-bit color (millions of colors) or more
A
Supported Operating Systems
See the websites listed on page xvii for the latest information on sup-
ported operating systems.
95
Q
Transferring Pictures
1
Choose how pictures will be copied to the computer.
Choose one of the following methods:
Direct USB connection: Turn the camera off and ensure that the
memory card is inserted in the camera. Connect the camera
to the computer using the supplied USB cable (do not use
force or insert the connectors at an angle) and then turn the
camera on.
SD card slot: If your computer is equipped with an SD card slot,
the card can be inserted directly in the slot.
SD card reader: Connect a card reader (available separately
from third-party suppliers) to the computer and insert the
memory card.
2
Start the Nikon Transfer 2 component of ViewNX 2.
If a message is displayed prompting you to choose a pro-
gram, select Nikon Transfer 2.
Viewing and Editing Pictures on a Computer
A
Windows 7
If the following dialog is displayed, select Nikon Transfer 2 as
described below.
1 Under Import pictures and
videos, click Change pro-
gram. A program selection
dialog will be displayed; select
Import File using Nikon
Transfer 2 and click OK.
2 Double-click Import file.
96
Q
3
Click Start Transfer.
At default settings, all the
pictures on the memory
card will be copied to the
computer.
4
Terminate the connection.
If the camera is connected to the computer, turn the camera
off and disconnect the USB cable. If you are using a card
reader or card slot, choose the appropriate option in the com-
puter operating system to eject the removable disk corre-
sponding to the memory card and then remove the card from
the card reader or card slot.
Viewing Pictures
Pictures are displayed in
ViewNX 2 when transfer is com-
plete.
A
Starting ViewNX 2 Manually
Windows: Double-click the
ViewNX 2 shortcut on the desk-
top.
Mac OS: Click the ViewNX 2 icon in
the Dock.
Click Start Transfe
r
97
Q
❚❚ Retouching Photographs
To crop pictures and perform
such tasks as adjusting sharp-
ness and tone levels, click the
Edit button in the toolbar.
❚❚ Creating Short Movies
Use the Short Movie Creator to
create short movies combining
photos, music, Motion Snap-
shots, and movie footage
(0 98).
❚❚ Printing Pictures
Click the Print button in the
toolbar. A dialog will be dis-
played, allowing you to print
pictures on a printer connected
to the computer.
❚❚ Viewing Places
If the selected image contains
GPS data recorded using an
optional GP-N100 GPS unit
(0 76), click the Geo Tag but-
ton in the toolbar to view a
map showing where the picture was taken (Internet connection
required).
A
For More Information
Consult online help for more infor-
mation on using ViewNX 2.
98
Q
Creating Short Movies
Use the supplied Short Movie Creator software to create movies
combining photographs with Motion Snapshots, movies, and
music.
1
Transfer pictures.
Transfer pictures as described on page 95.
2
Select components.
Select pictures in ViewNX 2.
3
Start Short Movie Creator.
The images selected in Step
2 will be displayed in the
Short Movie Creator “Com-
ponents” panel; if desired,
additional pictures can be
dragged into the “Compo-
nents” panel from ViewNX 2
and re-ordered using drag
and drop. In the case of
photos taken with the
Smart Photo Selector, only the best shot will be displayed.
The photo and movie components of Motion Snapshots
appear as separate files.
4
Select a style and background track.
Select a style in the “Styles” panel and a background track in
the “Music” panel. To preview the movie, click .
Click the Short Movie
Creator button in ViewNX 2.
“Components” panel
99
Q
5
Save the movie.
Click Create Movie. The dia-
log shown at right will be
displayed; select one of the
following options and click
Create.
Save file: Save the movie to a
folder on the computer.
Save to Camera (memory card):
Save the movie to a mem-
ory card so that it can later
be played back on the cam-
era. To use this option, you
will first need to insert a memory card that has been format-
ted in the camera (0 161) into a card reader or card slot.
A
Starting Short Movie Creator
If ViewNX 2 is not running, you can start
Short Movie Creator by double-clicking
the Short Movie Creator icon on the
desktop (Windows) or clicking the Short
Movie Creator icon in the Dock (Mac OS).
Windows Mac OS
A
Viewing Short Movies on Other Devices
Movies saved to a memory card using the Save to Camera (memory
card) option in Short Movie Creator can be viewed on the camera, or
displayed on a television monitor when the camera is connected to a
TV (0 100). Movies created in other applications or using the Save file
option in Short Movie Creator can not be viewed on the camera.
A
For More Information
Consult online help for more infor-
mation on using Short Movie Cre-
ator.
100
Q
Connect the camera to a television for playback.
High-Definition Devices
A type C mini-pin High-Definition Multimedia Interface (HDMI)
cable (available separately from third-party suppliers) can be
used to connect the camera to high-definition video devices.
1
Connect the HDMI cable.
Turn the camera off and connect the HDMI cable.
2
Tune the device to the HDMI channel.
3
Turn the camera on.
Turn the camera on; the camera monitor will remain off and
the camera shooting mode display will appear on the HD
device. Pictures can be played back using camera controls as
described elsewhere in this manual; note that the edges of
images may not be visible in the display.
Viewing Pictures on TV
A
Connecting an HDMI Cable
Always turn the camera off before connecting or disconnecting HDMI
cables. When connecting cables, do not use force or attempt to insert
the connectors at an angle.
Connect to HD device
(choose cable with
appropriate connector)
Connect to camera
101
Q
❚❚ HDMI Device Control
To control the camera remotely from a device that supports
HDMI-CEC (High-Definition Multimedia InterfaceConsumer
Electronics Control), select On for HDMI device control in the
camera setup menu. The HDMI-CEC device will display a remote
control guide and the remote control can be used in place of the
following camera controls:
The remote control guide can be hidden or displayed at any time
by pressing the yellow button on the remote control. See the
television manual for details.
D
Close the Connector Cover
Close the connector cover when the connectors are not in use. Foreign
matter in the connectors can interfere with data transfer.
A
Television Playback
Volume can be adjusted using the controls on the television; adjusting
volume on the camera has no effect. Use of an EH-5b AC adapter and
EP-5D power connector (available separately) is recommended for
extended playback.
Camera Remote control
1, 3, 4, 2 Up, down, left, and right buttons
J Center button
K Blue button
G Red button
Slide show menu Green button
102
Q
Selected JPEG images can be printed on a PictBridge printer
connected directly to the camera.
Connecting the Printer
Connect the camera using the supplied USB cable.
1
Turn the camera off.
2
Connect the USB cable.
Turn the printer on and connect the USB cable as shown. Do
not use force or attempt to insert the connectors at an angle.
3
Turn the camera on.
A welcome screen will be displayed in the monitor, followed
by a PictBridge playback display.
Printing Photographs
A
USB Hubs
Connect the camera directly to the printer; do not connect the
cable via a USB hub.
qw
A
Printing Via Direct USB Connection
Be sure the EN-EL21 battery is fully charged or use an optional EH-5b
AC adapter and EP-5D power connector.
Print setup
103
Q
Printing Pictures One at a Time
1
Select a picture.
Press 4 or 2 to view additional pic-
tures. Rotate the command dial right
to zoom in on the current frame
(0 86; rotate the dial left to exit
zoom). To view nine pictures at a time,
rotate the dial left when a picture is
displayed full frame. Use the multi selector to highlight pic-
tures, or rotate the command dial right to display the high-
lighted picture full frame.
2
Adjust print options.
Press J to display PictBridge print options (0 107). Press 1
or 3 to highlight options and press 2 to select.
3
Start printing.
Highlight Start printing and press J
to start printing. To cancel before all
copies have been printed, press J
again.
D
Selecting Photographs for Printing
Movies and NEF (RAW) photographs (0 123) can not be selected for
printing. If Motion Snapshots are selected, only the photographs will
be printed; the movie portion will not be printed. If photographs taken
with the Smart Photo Selector are selected, only the best shot will be
printed.
Print setup
104
Q
Printing Multiple Pictures
1
Display the PictBridge menu.
2
Choose an option.
Highlight one of the following options and press 2.
Select images for printing: Select pictures for printing.
Select by date: Print one copy of each picture taken on
selected dates.
Print DPOF print order: Print an existing print order created with
the DPOF print order option in the playback menu
(0 108). The current print order will be displayed in Step 3.
Index print: To create an index print of all JPEG pictures on the
memory card, proceed to Step 4. Note that if the memory
card contains more than 256 pictures, a warning will be dis-
played and only the first 256 images will be printed.
Press the G button in the
PictBridge playback display (see Step
3 on page 102).
Print setup
105
Q
3
Select pictures or choose dates.
If you chose Select images for printing or Print DPOF print
order in Step 2, press 4 or 2 or rotate the multi selector to
highlight pictures. To select the current picture for printing,
press 1. The picture will be marked with a Z icon and the
number of prints will be set to 1; press 1 or 3 to specify the
number of prints (up to 99; to deselect the picture, press 3
when the number of prints is 1). Continue until all the desired
pictures have been selected.
If you chose Select by date in Step 2, press 1 or 3 to highlight
dates and press 2 to select or deselect.
A
Inspecting Pictures
To view pictures taken on the date highlighted in the Select by
date date list, rotate the command dial left. Use the multi selector
to highlight pictures, or rotate the dial left to return to the date list.
The picture currently highlighted in the Select images for printing
or Print DPOF print order displays or in the Select by date thumb-
nail display can be inspected by pressing the command dial; the
picture will be displayed full screen while the dial is pressed.
106
Q
4
Adjust print options.
Press J to display PictBridge print options. Press 1 or 3 to
highlight page size, border, or time stamp items and press 2
to display the options described on page 107; note that a
warning will be displayed if the selected page size is too small
for an index print.
5
Start printing.
Highlight Start printing and press J
to start printing. To cancel before all
copies have been printed, press J
again.
A
Errors
See page 192 for information on what to do if an error occurs during
printing.
107
Q
A
PictBridge Print Options
Page
size
Highlight a page size (only sizes supported by the current
printer are listed) and press J to select and exit to the previous
menu (to print at the default page size for the current printer,
select Use printer settings).
Number
of
copies
This option is listed only when pictures are printed one at a
time. Press 1 or 3 to choose number of copies (maximum 99),
then press J to select and return to the previous menu.
Print
border
This option is listed only if supported by the printer. Highlight
Use printer settings (use current printer settings), Ye s (print
white borders), or No (no borders) and press J to select and
exit to the previous menu.
Print
time
stamp
Highlight Use printer settings (use current printer settings),
Ye s (print times and dates of recording on photos), or No (no
time stamp) and press J to select and exit to the previous
menu.
Crop
This option is listed only when pictures are printed one at a
time on a printer that supports cropping. To exit without crop-
ping, highlight No and press J. To crop the current picture,
highlight Ye s and press 2. A crop selection dialog will be dis-
played; rotate the command dial right to increase the size of
the crop, left to decrease. Position the crop using the multi
selector and press J. Note that print quality may drop if small
crops are printed at large sizes.
108
Q
Creating a DPOF Print Order: Print Set
The DPOF print order option is used to
create digital “print orders” for Pict-
Bridge-compatible printers and devices
that support DPOF. Press the G but-
ton, select DPOF print order in the play-
back menu, and choose from the
following options:
Select/
set
Press 4 or 2 or rotate the multi selec-
tor to highlight pictures (0 111). To
select the current picture for printing,
press 1. The picture will be marked
with a Z icon and the number of
prints will be set to 1; press 1 or 3 to
specify the number of prints (up to 99;
to deselect the picture, press 3 when the number of prints is 1).
When the selection is complete, press J to display printing
options. Highlight Print shooting info (print the shutter speed
and aperture on all pictures in the print order) or Print date
(print the date of recording on all pictures in the print order) and
press 2 to select or deselect, and then press J to complete the
print order.
Reset Remove all pictures from the print order.
D
DPOF Print Order
DPOF date and shooting info options are not supported when printing
via direct USB connection; to print the date of recording on photo-
graphs in the current print order, use the PictBridge Print time stamp
option (0 107).
The DPOF print order option can not be used if there is not enough
space on the memory card to store the print order. For restrictions on
the types of images that can be selected for printing, see page 103.
Print orders may not print correctly if images are deleted using a com-
puter or other device after the print order is created.
109
o
o
The Playback Menu
To display the playback menu, press G and select the play-
back menu tab (K).
The playback menu contains the following options:
G button
Option Description Default 0
Delete Delete multiple images. 87
Slide show
View movies and photos in a slide
show.
Image type: All images
Frame interval: 5 s
Movie playback time:
Same as frame interval
Audio: Background track 1
89
Image
review
Choose whether pictures are dis-
played after shooting.
On 112
Rotate tall
Rotate “tall” (portrait-orientation)
pictures for display during playback.
On 112
DPOF print
order
Create digital “print orders. 108
Protect
Protect pictures from accidental
deletion.
112
Rating Rate pictures. 112
D-Lighting
Brighten shadows in dark or back-lit
photos, creating a retouched copy
that is saved separately from the
unmodified original.
113
Resize
Create small copies of selected pic-
tures.
Choose size: 1.1 M 114
110
s
z
8
y
9
t
I
Q
Q
o
g
n
Crop
Create cropped copies of selected
pictures.
—115
Edit movie
Create copies of movies from which
unwanted footage has been
trimmed.
—116
Change
theme
Change the themes for existing
Motion Snapshots.
—117
A
Playback
The camera may be unable to display or retouch images that were cre-
ated or have been edited with other devices.
A
Image Quality
Copies created from JPEG photos are the same quality as the original,
while copies created from NEF (RAW) photos are saved as fine-quality
JPEG images.
Option Description Default 0
111
o
Selecting Multiple Images
Choosing the options listed below dis-
plays an image selection dialog. Press 4
or 2 or rotate the multi selector to high-
light pictures (only pictures to which the
operation applies are available for selec-
tion).
Delete > Delete selected images (0 87)
DPOF print order > Select/set (0 108)
Protect > Select/set (0 112) Rating (0 112)
D-Lighting (0 113) Resize > Select images (0 114)
Crop (0 115) Edit movie (0 116)
Change theme (0 117)
A
Inspecting Pictures
The picture currently highlighted in the
thumbnail display can be inspected by press-
ing the command dial; the picture will be dis-
played full screen while the dial is pressed.
112
s
z
8
y
9
t
I
Q
Q
o
g
n
If On is selected, pictures will be displayed immediately after
shooting. To view pictures when Off is selected, press the K
button.
Choose whether to rotate “tall” (portrait-orientation) pictures for
display during playback. Note that because the camera itself is
already in the appropriate orientation during shooting, images
are not rotated automatically during image review.
Protect selected images from accidental deletion. Note that this
option does NOT protect files from deletion when the memory
card is formatted (0 161).
Press 4 or 2 or rotate the multi selector to highlight pictures
(0 111) and press 1 or 3 to choose a rating (0 88). Press J to
exit when the operation is complete.
Image Review
Rotate Tall
On
Tall” (portrait-orientation) pictures are automatically rotated
for display in the camera monitor. Pictures taken with Off
selected for Auto image rotation (0 166) will be displayed in
“wide” (landscape) orientation.
Off
Tall” (portrait-orientation) pictures are displayed in “wide”
(landscape) orientation.
Protect
Select/set
Press 4 or 2 or rotate the multi selector to highlight pictures
(0 111) and press 1 or 3 to select or deselect. Press J to exit
when the operation is complete.
Reset Remove protection from all pictures.
Rating
113
o
Applied to selected images, D-Lighting creates copies that have
been processed to brighten shadows. Use to retouch dark or
backlit photographs.
Press 4 or 2 or rotate the multi selector
to highlight an image (0 111) and press
J to display the options shown at right.
Press 1 or 3 to choose the amount of
correction performed (the effect can be
previewed in the display; press and hold
the command dial to zoom in) and press J to create a
retouched copy.
D-Lighting
Before After
D
D-Lighting
Noise (randomly-spaced bright pixels, fog, or lines) may appear in cop-
ies created with D-Lighting. Uneven shading may be visible with some
subjects.
A
Image Size
Copies created from JPEG photos are the same size as the original,
while copies created from NEF (RAW) photos are saved as JPEG images
with a size of 4608 × 3072.
114
s
z
8
y
9
t
I
Q
Q
o
g
n
Create small copies of selected photo-
graphs. Select Choose size and choose a
size from 1280×856; 1.1 M (1280 × 856
pixels), 960×640; 0.6 M (960 × 640 pix-
els), and 640×424; 0.3 M (640 × 424 pix-
els), and then choose Select images.
Press 4 or 2 or rotate the multi selector to highlight pictures
(0 111) and press 1 or 3 to select or deselect. When the selec-
tion is complete, press J to display a confirmation dialog and
select Ye s to save the resized copies.
Resize
D
Resized Copies
Playback zoom may not be available with resized copies.
115
o
Create a cropped copy of selected photo-
graphs. Press 4 or 2 or rotate the multi
selector to highlight a picture (0 111)
and press J to display the image with
the default crop shown in yellow. Use the
controls below to choose a crop and save
the copy.
Crop
To Use Description
Choose size
Rotate the command dial to choose the crop
size.
Choose
aspect ratio
Rotate the multi selector to choose between
aspect ratios of 3 : 2, 4 : 3, 1 : 1, and 16 : 9.
Position crop Press 1, 2, 3, or 4 to position the crop.
Create copy J Save the current crop as a separate file.
D
Cropped Copies
Playback zoom may not be available with
cropped copies. The size of the copy varies
with crop size and aspect ratio and appears
at upper left in the crop display.
116
s
z
8
y
9
t
I
Q
Q
o
g
n
Trim footage from movies to create edited copies.
1
Select Choose start point or Choose end point.
Choose from the following options:
Choose start point: Trim the opening
footage.
Choose end point: Trim the closing foot-
age.
2
Select a movie.
Press 4 or 2 or rotate the multi selector to highlight a movie
(0 111) and press J to select.
3
Pause the movie on opening or closing frame.
Play the movie back, pressing J to
begin and resume playback and 3 to
pause (0 56; the first frame is indi-
cated by a h icon in the display, the
last frame by i). Pause playback
when you reach the frame that will
become the new opening or closing frame.
4
Delete the unwanted frames.
Press 1 to delete all frames before (Choose start point) or
after (Choose end point) the current frame.
5
Save the copy.
Highlight Ye s and press J to save the
edited copy. If necessary, the copy can
be trimmed as described above to
remove additional footage.
Edit Movie
117
o
Assign existing Motion Snapshots new themes (NMS-format files
only; Motion Snapshots created with MOV file selected for File
format in the shooting menu can not be assigned new themes).
Choose from Beauty, Waves, Relaxation, Tenderness, and
None. To hear a theme, highlight it and press the $ button;
volume is controlled with the command dial.
D
Trimming Movies
Movies must be at least two seconds long. If a copy can not be created
at the current playback position, the current position will be displayed
in red in Step 4 and no copy will be created. The copy will not be saved
if there is insufficient space available on the memory card.
To prevent the camera from turning off unexpectedly, use a fully-
charged battery when editing movies.
Change Theme
A
See Also
See page 128 for information on Motion Snapshot file formats.
118
s
z
8
y
9
t
I
Q
Q
o
g
n
119
i
i
The Shooting Menu
To display the shooting menu, press G and select the shoot-
ing menu tab (C, t, u, v, w, u, z, or v).
The shooting menu contains the following options:
G button
Option Description Default 0
Reset shooting
options
Reset shooting options to
default values.
122
Exposure
mode
Choose how the camera sets
shutter speed and aperture.
Scene auto selector
(Motion Snapshot mode)/
t Programmed auto
(other modes)
122
Image quality
Choose a file format and com-
pression ratio.
JPEG normal 123
Image size Choose a size for new photos. 4608 × 3072; 14.2 M 123
Continuous
Choose the frame rate for con-
tinuous shooting (0 63).
15 fps 125
Silent
photography
Choose whether to mute shut-
ter and control sounds.
Off 125
Number of
shots saved
Choose the number of shots
selected by the Smart Photo
Selector (0 44).
5 125
Frame rate
Choose a frame rate for slow-
motion movies (0 53).
400 fps 125
Movie settings
Choose HD movie frame size
and frame rate (0 49).
1080/60i 126
120
i
Movie before/
after
Choose when the movie por-
tion of Motion Snapshots is
recorded (0 59).
1.0 s : 0.6 s 127
File format
Choose a file format for new
Motion Snapshots (0 59).
NMS file 128
Metering
Choose how the camera
meters exposure.
Matrix 128
White balance
Adjust settings for different
types of lighting.
Auto 130
ISO sensitivity
Control the camera’s sensitivity
to light.
Auto (160–3200) 135
Picture Control
Choose how the camera pro-
cesses pictures.
Standard 136
Custom Picture
Control
Create custom Picture Con-
trols.
140
Auto distortion
control
Choose whether the camera
corrects barrel and pincushion
distortion.
Off 142
Color space
Choose a color space for new
pictures.
sRGB 143
Active
D-Lighting
Avoid loss of detail in high-
lights and shadows.
On 144
HDR
Enhance detail in highlights
and shadows when photo-
graphing high-contrast scenes.
Off 145
Long exposure
NR
Reduce noise in long time-
exposures.
Off 146
High ISO noise
reduction
Reduce noise at high ISO sensi-
tivities.
On 146
Movie sound
options
Choose sound recording
options.
Microphone:
Auto sensitivity (A)
Wind noise reduction: On
147
Option Description Default 0
121
i
1 Varies with lens (0 148).
2 The camera focuses on the subject in the center of the frame when Slow
motion is selected in advanced movie mode.
3 Face detection is not available when Slow motion is selected in advanced
movie mode.
Vibration
reduction
Adjust settings for 1 NIKKOR
lenses with vibration reduc-
tion.
Active/On
1
148
Focus mode
Choose how the camera
focuses.
See page 149 149
AF-area mode
Choose how the focus area is
selected.
Auto-area
2
153
Face-priority Turn face priority on or off. On
3
156
Built-in AF
assist
Control the built-in AF-assist
illuminator.
On 156
Flash control
Choose a flash mode for the
built-in flash and optional flash
units.
TTL (Manual: Full) 157
Flash
compensation
Control flash output. 0.0 158
Option Description Default 0
122
i
Select Ye s to reset the options in the shooting menu and other
shooting settings to default values (0 119, 185).
The options in the exposure mode menu offer varying degrees
of control over shutter speed and aperture.
Reset Shooting Options
Exposure Mode
h Scene auto
selector
An automatic, “point-and-shoot” mode in which the
camera not only chooses shutter speed and aperture
but adjusts other settings to suit the subject (
automatic
scene selection;
0 26).
t Programmed
auto
The camera sets shutter speed and aperture for optimal
exposure (0 34). Recommended for snapshots and in
other situations in which there is little time to adjust
camera settings.
u Shutter-
priority auto
You choose the shutter speed; the camera selects an
aperture for best results (0 35). Use to freeze or blur
motion.
v Aperture-
priority auto
You choose the aperture; the camera selects a shutter
speed for best results (0 36). Use to blur the back-
ground or bring both foreground and background into
focus.
w Manual
You control both shutter speed and aperture (0 37). Set
shutter speed to “Bulb” or “Time” for long time-expo-
sures.
A
ISO Sensitivity (t, u, v, and w Modes)
When an “auto” option is selected for ISO sensitivity (0 135), the cam-
era will automatically adjust sensitivity within the selected range if
optimal exposure can not be achieved at the selected shutter speed or
aperture.
123
i
Choose a file format and compression ratio for photographs.
Choose the size of photographs taken in still image and Smart
Photo Selector modes.
* Print size in inches equals image size in pixels divided by printer resolution
in dots per inch (dpi; 1 inch=approximately 2.54 cm).
Image Quality
Option File type Description
NEF (RAW) NEF
Compressed 12-bit raw data from the image sensor
are saved directly to the memory card. White bal-
ance, contrast, and other settings can be adjusted
on a computer after shooting.
JPEG fine
JPEG
Record JPEG images at a compression ratio of
roughly 1 : 4 (fine quality).
JPEG normal
Record JPEG images at a compression ratio of
roughly 1 : 8 (normal quality).
JPEG basic
Record JPEG images at a compression ratio of
roughly 1 : 16 (basic quality).
NEF (RAW) +
JPEG fine
NEF/
JPEG
Two images are recorded: one NEF (RAW) image
and one fine-quality JPEG image.
Image Size
Option Size (pixels) Approximate print size at 300 dpi (cm/in.)
*
# 4608×3072; 14.2 M 4608 × 3072 39 × 26/15.4 × 10.2
$ 3456×2304; 8.0 M 3456 × 2304 29.3 × 19.5/11.5 × 7.7
% 2304×1536; 3.5 M 2304 × 1536 19.5 × 13/7.7 × 5.1
124
i
A
NEF (RAW)/NEF (RAW) + JPEG
The option selected for image size does not affect the size of NEF (RAW)
images. NEF (RAW) images can be viewed on the camera or using soft-
ware such as Capture NX 2 (available separately; 0 171) or ViewNX 2
(supplied).
When photographs taken at NEF (RAW) + JPEG are viewed on the cam-
era, only the JPEG image will be displayed. When photographs taken at
these settings are deleted, both NEF and JPEG images will be deleted.
A
File Names
Photos and movies are stored as image files with names of the form
“xxx_nnnn.yyy,” where:
xxx is either NMS (Motion Snapshots recorded with NMS file selected
for File format; 0 128) or DSC (photos, MOV-format Motion Snap-
shots, and movies, including copies created with Edit movie; 0 116),
nnnn a four-digit number between 0001 and 9999 assigned automat-
ically in ascending order by the camera, and
yyy one of the following three letter extensions: “NEF” for NEF (RAW)
images, “JPG” for JPEG images, or “MOV” for movies.
The NEF and JPEG files recorded at settings of NEF (RAW)+JPEG have
the same file names but different extensions. Trimmed copies created
with Edit movie (0 116) have file names beginning with “DSC”; copies
created with the other retouch options in the playback menu have file
names beginning with “CSC” (e.g., “CSC_0001.JPG”). Images recorded
with Adobe RGB selected for Color space (0 143) have names that
begin with an underscore (e.g., “_DSC0001.JPG”).
A
Image Quality and Size
Together, image quality and size determine how much space each pho-
tograph occupies on the memory card. Larger, higher quality images
can be printed at larger sizes but also require more memory, meaning
that fewer such images can be stored on the memory card (0 186).
125
i
Choose the frame rate for continuous shooting (0 63) from 5,
15, 30, and 60 fps. An electronic shutter is used at rates of 15 fps
and above; except when On is selected for Silent photography,
a mechanical shutter is used when 5 fps is selected.
Select On to reduce camera noise in quiet surroundings. The
camera uses an electronic shutter and silences the sounds pro-
duced when the camera controls are operated. Selecting Off
restores normal operation.
Choose the number of shots selected by the Smart Photo Selec-
tor. If 5 is selected, the camera will save the best shot and 4 best
shot candidates. If 1 is selected, the camera will save only the
best shot.
Choose a frame rate for slow motion movies (0 53). The faster
the frame rate, the smaller the frame size.
* All figures are approximate. Slow motion movies will play back over a period
of about 13.2 (400 fps) or 40 (1200 fps) times the recording time.
Continuous
Silent Photography
Number of Shots Saved
Frame Rate
Option Frame size (pixels)
Bit rate
(approx.)
Maximum length
(shooting)
Maximum length
(playback)
*
400 fps 640 × 240 2 Mbps 3 seconds 40 seconds
1200 fps 320 × 120 1 Mbps 3 seconds 2 minutes
A
See Also
For information on the total length of movies that can be stored on the
memory card, see page 187.
126
i
Choose a frame size and frame rate for HD movies (0 49).
* Sensor output is about 60 fps.
Movie Settings
Option Frame size (pixels) Recording rate
Bit rate
(approx.)
Maximum length
t 1080/60i
1920 × 1080
59.94 fields/s
*
24 Mbps
20 minutes
r 1080/30p 29.97 fps 24 Mbps
u 720/60p
1280 × 720
59.94 fps 16 Mbps
29 minutes
s 720/30p 29.97 fps 12 Mbps
A
Photo Frame Size
Photographs recorded by pressing the shutter-release button all the
way down during movie recording have an aspect ratio of 3 : 2. The
frame size varies with the option selected for Movie settings:
1080/60i and 1080/30p: 4608 × 3072
720/60p and 720/30p: 1280 × 865
A
See Also
For information on the total length of movies that can be stored on the
memory card, see page 187.
127
i
Choose whether the movie portions of Motion Snapshots end
when the shutter-release button is pressed all the way or about
0.6 s after (0 59).
Movie Before/After
1.0 s : 0.6 s
Movie footage starts about a second before the shutter-
release button is pressed all the way down and ends about
0.6 s after.
1.6 s : 0 s
The camera records about 1.6 s of movie footage, ending
when the shutter-release button is pressed all the way down.
Shutter-release button
pressed halfway
Shutter-release button
pressed all the way down
1.0 s 0.6 s
Movie footage
Shutter-release button
pressed halfway
Shutter-release button
pressed all the way down
1.6 s
Movie footage
128
i
Choose the file format for Motion Snapshots (0 59).
Choose how the camera sets exposure.
File Format
NMS file
Motion Snapshots are recorded as a 4 s MOV file and a JPEG
image. Motion Snapshots can only be viewed on the camera or
using ViewNX 2.
MOV file
Motion Snapshots are recorded as a 10 s MOV file that can be
viewed in a variety of computer applications. The Motion Snap-
shot is not displayed automatically when shooting ends (0 60);
for information on viewing Motion Snapshot movies, see page
56.
Metering
L Matrix
The camera meters a wide area of the frame and adjusts for
contrast (tone distribution), color, composition, and subject
distance, producing natural results in most situations.
M
Center-
weighted
The camera meters the entire frame but assigns the greatest
weight to the center area. This is the classic meter for por-
traits and is recommended if you are using filters with an
exposure factor (filter factor) over 1×.
N Spot
The camera meters the current focus area; use to meter off-
center subjects (if Auto-area is selected for AF-area mode
as described on page 153, the camera will meter the center
focus area, while during face priority the camera will meter
the focus area closest to the center of the selected face;
0 27). Spot metering ensures that the subject will be cor-
rectly exposed, even when framed against a background
that is much brighter or darker.
A
Metering and Shooting Mode
In auto and best moment capture modes, and when h Scene auto
selector (0 122) is chosen in Motion Snapshot mode, metering is
adjusted automatically according to the scene.
129
i
Autoexposure Lock
Exposure lock is used to recompose photographs after metering
exposure. It is most effective when used with center-weighted
or spot metering (0 128) to frame off-center subjects that are
much brighter or darker than their surroundings or to optimize
exposure for an object other than your main subject.
1
Meter exposure.
2
Lock exposure.
With the shutter-release button
pressed halfway and the subject posi-
tioned in the focus area, press 1 (A)
to lock exposure. While exposure lock
is in effect, an AE-L/AF-L indicator will be
displayed. Exposure will remain
locked until 1 (A) is pressed again,
even if you later remove your finger
from the shutter-release button.
3
Recompose the photograph.
Recompose the photograph and shoot. To end exposure lock,
press 1 (A) again.
Position the subject in the center of
the frame and press the shutter-
release button halfway to meter expo-
sure. Check that the focus area is dis-
played in green.
A
See Also
For information on changing the role of
the 1 (A) button, see page 163.
130
i
White balance ensures that colors are unaffected by the color of
the light source. Auto white balance is recommended for most
light sources, but other values can be selected if necessary
according to the type of source.
White Balance
v Auto
Automatic white balance adjustment. Recom-
mended in most situations.
J Incandescent Use under incandescent lighting.
I Fluorescent Use with cool-white fluorescent lighting.
H Direct sunlight Use with subjects lit by direct sunlight.
N Flash Use with built-in or optional flash units.
G Cloudy Use in daylight under overcast skies.
M Shade Use in daylight with subjects in the shade.
L Preset manual Measure white balance (0 132).
A
White Balance and Shooting Mode
In auto and best moment capture modes, and when h Scene auto
selector (0 122) is chosen in Motion Snapshot mode, white balance is
adjusted automatically according to the scene.
131
i
Fine-Tuning White Balance
Options other than Preset manual can be fine-tuned as follows:
1
Display fine-tuning options.
Highlight an option other than Preset
manual and press 2 to display the
fine-tuning options shown at right.
2
Fine-tune white balance.
Use the multi selector to fine-tune white balance.
3
Save changes and exit.
Press J. An asterisk will appear next to the white balance
icon (0 4) in the detailed display (0 5) to show that white
balance has been altered from default values.
Increase green
Increase blue Increase amber
Increase magenta
A
White Balance Fine Tuning
The colors on the fine-tuning axes are relative, not absolute. For
example, moving the cursor to B (blue) when a “warm” setting such
as J (incandescent) is selected will make photographs slightly
colder” but will not actually make them blue.
Coordinates
Adjustmen
t
132
i
Preset Manual
Preset manual is used to record and recall custom white balance
settings for shooting under mixed lighting or to compensate for
light sources with a strong color cast.
1
Light a reference object.
Place a neutral gray or white object under the lighting that
will be used in the final photograph. A standard gray panel
can be used for increased precision.
2
Select Preset manual.
Highlight Preset manual in the white
balance menu and press 2. The dialog
shown at right will be displayed; high-
light Ye s and press J to overwrite the
existing value for preset manual white
balance.
The message shown at right will be
displayed.
133
i
3
Measure white balance.
When the camera is ready to measure
white balance, a flashing L will be
displayed. Before the indicator stops
flashing, frame the reference object so
that it fills the display and press the
shutter-release button all the way
down. No photograph will be
recorded; white balance can be mea-
sured accurately even when the cam-
era is not in focus.
4
Check the results.
If the camera was able to measure a
value for white balance, the message
shown at right will be displayed. To
return to shooting mode immediately,
press the shutter-release button half-
way.
If lighting is too dark or too bright, the
camera may be unable to measure
white balance.
The message at right
will be displayed.
Return to Step 3 and
measure white balance again.
134
i
D
Auto Power Off
White balance measurement will end without a new value being
acquired if no operations are performed for the time selected for Auto
power off in the setup menu (0 162; the default is 1 minute).
D
Preset White Balance
The camera can store only one value for preset white balance at a time;
the existing value will be replaced when a new value is measured. Note
that exposure is automatically increased by 1 EV when measuring
white balance; in mode w, adjust exposure so that the exposure indica-
tor shows ±0 (0 37).
A
Color Temperature
The perceived color of a light source varies with the viewer and other
conditions. Color temperature is an objective measure of the color of a
light source, defined with reference to the temperature to which an
object would have to be heated to radiate light in the same wave-
lengths. While light sources with a color temperature in the neighbor-
hood of 5000–5500 K appear white, light sources with a lower color
temperature, such as incandescent light bulbs, appear slightly yellow
or red. Light sources with a higher color temperature appear tinged
with blue. The camera white balance options are adapted to the follow-
ing color temperatures (all figures are approximate):
Sodium-vapor lamps: 2700 K
J (incandescent)/
Warm-white fluorescent: 3000 K
White fluorescent: 3700 K
I Cool-white fluorescent: 4200 K
Day white fluorescent: 5000 K
H (direct sunlight): 5200 K
N (flash): 5400 K
G (cloudy): 6000 K
Daylight fluorescent: 6500 K
Mercury-vapor lamps: 7200 K
M (shade): 8000 K
135
i
The higher the ISO sensitivity, the less light needed to make an
exposure, allowing faster shutter speeds or smaller apertures,
but the more likely the image is to be affected by “noise” in the
form of randomly-spaced bright pixels, fog, or lines.
ISO Sensitivity
q
x
w
Auto (160–6400)
Auto (160–3200)
Auto (160–800)
The camera adjusts ISO sensitivity in response to
lighting conditions. ISO sensitivity is adjusted in
the range given in brackets; choose larger ranges
for increased sensitivity when lighting is poor,
smaller ranges to reduce noise.
160, 200, 400, 800,
1600, 3200, 6400
ISO sensitivity is fixed at the selected value.
A
Auto” ISO Sensitivity Options
When auto ISO sensitivity control is in effect,
the display shows an ISO-AUTO icon and the
current ISO sensitivity.
136
i
Choose how the camera processes photographs.
Modifying Picture Controls
Existing preset and custom Picture Controls (0 140) can be
modified to suit the scene or your creative intent.
1
Display options.
Highlight an item in the Picture Con-
trol menu and press 2 to display Pic-
ture Control settings (0 138; the
settings available with custom Picture
Controls are the same as the preset
controls on which they are based). To
use an unmodified Picture Control, highlight it and press J.
Picture Control
Q Standard
Standard processing for balanced results. Recom-
mended in most situations.
R Neutral
Minimal processing for natural results. Choose for
photographs that will later be extensively processed
or retouched.
S Vivid
Pictures are enhanced for a vivid, photoprint effect.
Choose for photographs that emphasize primary col-
ors.
T Monochrome Take monochrome photographs.
e Portrait
Process portraits for natural texture and a rounded
feel.
f Landscape
Take vibrant photographs of landscapes and city-
scapes.
137
i
2
Adjust settings.
Press 1 or 3 to highlight the desired
setting and press 4 or 2 to choose a
value. Repeat this step until all set-
tings have been adjusted, or select
Quick adjust to choose a preset combination of settings.
Default settings can be restored by pressing the O button.
3
Save changes and exit.
Press J.
A
Preset Picture Controls Versus Custom Picture Controls
The Picture Controls supplied with the camera are referred to as preset
Picture Controls. Custom Picture Controls are created through modifica-
tions to existing Picture Controls using the Custom Picture Control
option in the shooting menu (0 140). If desired, custom Picture Con-
trols can be saved to a memory card and copied to other Nikon 1 V2
cameras or loaded into compatible software (0 141).
A
Modified Picture Controls
Picture Controls that have been modified
from default settings are indicated by aster-
isks (“*”) next to the Picture Control name and
icon in the Picture Control menu (0 136) and
next to the Picture Control icon (0 4) in the
detailed display (0 5).
A
Picture Control and Shooting Mode
In auto and best moment capture modes, and when h Scene auto
selector (0 122) is chosen in Motion Snapshot mode, the camera auto-
matically chooses a Picture Control according to the scene.
138
i
❚❚ Picture Control Settings
Quick adjust
Choose from options between –2 and +2 to reduce or
exaggerate the effect of the selected Picture Control
(note that this resets all manual adjustments). For
example, choosing positive values for Vivid makes pic-
tures more vivid. Not available with Neutral, Mono-
chrome, or custom Picture Controls.
Manual adjustments
(all Picture Controls)
Sharpening
Control the sharpness of outlines. Select A to adjust
sharpening automatically according to the type of
scene, or choose from values between 0 (no sharpen-
ing) and 9 (the higher the value, the greater the sharp-
ening).
Contrast
Select A to adjust contrast automatically according to
the type of scene, or choose from values between –3
and +3 (lower values prevent highlights in portrait sub-
jects from being “washed out” in direct sunlight, while
higher values preserve detail in misty landscapes and
other low-contrast subjects).
Brightness
Choose –1 for reduced brightness, +1 for enhanced
brightness. Does not affect exposure.
Manual adjustments
(non-monochrome only)
Saturation
Control the vividness of colors. Select A to adjust satu-
ration automatically according to the type of scene, or
choose from values between –3 and +3 (lower values
reduce saturation and higher values increase it).
Hue
Choose negative values (to a minimum of –3) to make
reds more purple, blues more green, and greens more
yellow, positive values (up to +3) to make reds more
orange, greens more blue, and blues more purple.
Manual adjustments
(monochrome only)
Filter
effects
Simulate the effect of color filters on monochrome pho-
tographs. Choose from Off, yellow, orange, red, and
green (0 139).
Toning
Choose the tint used in monochrome photographs
from B&W (black-and-white), Sepia, Cyanotype (blue-
tinted monochrome), Red, Yellow, Green, Blue Green,
Blue, Purple Blue, and Red Purple (0 139).
139
i
D
A” (Auto)
Results for auto sharpening, contrast, and saturation vary with expo-
sure and the position of the subject in the frame.
A
The Picture Control Grid
Pressing the command dial in Step 2 displays
a Picture Control grid showing the contrast
and saturation for the selected Picture Con-
trol in relation to the other Picture Controls
(only contrast is displayed when Mono-
chrome is selected). Release the dial to
return to the Picture Control menu.
The icons for Picture Controls that use auto
contrast and saturation are displayed in
green in the Picture Control grid, and lines
appear parallel to the axes of the grid.
A
Previous Settings
The line under the value display in the Picture
Control setting menu indicates the previous
value for the setting. Use this as a reference
when adjusting settings.
A
Filter Effects (Monochrome Only)
The options in this menu simulate the effect of color filters on mono-
chrome photographs. The following filter effects are available:
Y (yellow)
Enhance contrast. Can be used to reduce the brightness
of the sky in landscape photographs. Orange produces
more contrast than yellow, red more contrast than orange.
O (orange)
R (red)
G (green) Softens skin tones. Can be used for portraits.
Note that the effects achieved with Filter effects are more pronounced
than those produced by physical glass filters.
A
Toning (Monochrome Only)
Pressing 3 when Toning is highlighted dis-
plays saturation options. Press 4 or 2 to
adjust saturation. Saturation control is not
available when B&W (black-and-white) is
selected.
140
i
The Picture Controls supplied with the camera can be modified
and saved as custom Picture Controls.
Edit/Save
To create a custom Picture Control, select Edit/save and follow
the steps below.
1
Select a Picture Control.
Highlight an existing Picture Control
and press 2, or press J to proceed to
Step 3 to save a copy of the high-
lighted Picture Control without fur-
ther modification.
2
Edit the selected Picture Control.
See page 138 for more information. To
abandon any changes and start over
from default settings, press the O but-
ton. Press J when settings are com-
plete.
3
Save the Picture Control.
Highlight a destination (C-1 through
C-9) and press J to save the custom
Picture Control and return to the
shooting menu.
The new Picture Control will be listed
in the Picture Control menu.
Custom Picture Control
141
i
Load from/Save to Card
Custom Picture Controls created using the Picture Control Utility
available with ViewNX 2 or optional software such as
CaptureNX2 can be copied to a memory card and loaded into
the camera, or custom Picture Controls created with the camera
can be copied to the memory card to be used in other
Nikon 1 V2 cameras and compatible software and then deleted
when no longer needed.
To copy custom Picture Controls to or from the memory card, or
to delete custom Picture Controls from the memory card, select
Load from/save to card in the Custom Picture Control menu.
The following options will be displayed:
Copy to camera
Copy custom Picture Controls from the memory card to
custom Picture Controls C-1 through C-9.
Delete from card
Delete selected custom Picture
Controls from the memory
card. The confirmation dialog
shown at right will be dis-
played before a Picture Control
is deleted; to delete the
selected Picture Control, high-
light Ye s and press J.
Copy to card
Copy a custom Picture Control (C-1 through C-9) to a
selected destination (1 through 99) on the memory card.
A
Copy to Card
Up to 99 custom Picture Controls can be stored on the memory card at
any one time. The memory card can only be used to store user-created
custom Picture Controls. The preset Picture Controls supplied with the
camera can not be copied to the memory card or deleted.
A
Custom Picture Control > Delete
The Delete option in the Custom Picture Control menu can be used to
delete selected custom Picture Controls from the camera when they
are no longer needed.
142
i
Select On to reduce barrel distortion in photos taken with wide-
angle lenses and to reduce pin-cushion distortion in photos
taken with long lenses (note that the edges of photographs may
be cropped out, and that there may be an increase in the time
needed to process images before they are saved). This option is
available only with 1 NIKKOR lenses and not with other NIKKOR
lenses attached using the FT1 mount adapter. Results are not
guaranteed with third-party lenses.
Auto Distortion Control
143
i
The color space determines the gamut of colors available for
color reproduction. Choose sRGB for photos that will be used
as is,” with no further modification, Adobe RGB for photos that
will be extensively processed or retouched after leaving the
camera. Note that regardless of the option selected, sRGB is
used for movies and Motion Snapshots and for photos taken
during movie recording.
Color Space
A
Color Space
Color spaces define the correspondence between colors and the
numeric values by which they are represented in a digital image file.
The sRGB color space is widely used, while Adobe RGB is typically used
in publishing and commercial printing. sRGB is recommended when
taking photographs that will be printed without modification or
viewed in applications that do not support color management, or
when taking photographs that will be printed with ExifPrint, the direct
printing option on some household printers, or kiosk printing or other
commercial print services. Adobe RGB photographs can also be
printed using these options, but colors will not be as vivid.
JPEG photographs taken in the Adobe RGB color space are DCF compli-
ant; applications and printers that support DCF will select the correct
color space automatically. If the application or device does not support
DCF, select the appropriate color space manually. For more informa-
tion, see the documentation provided with the application or device.
A
Nikon Software
ViewNX 2 (supplied) and Capture NX 2 (available separately) automati-
cally select the correct color space when opening photographs created
with this camera.
144
i
Active D-Lighting preserves details in highlights and shadows
for natural contrast. Use with high contrast scenes such as a
brightly lit outdoor view framed in a door or window or a sub-
jects in the shade on a sunny day. It is most effective when used
with Matrix metering (0 128).
Active D-Lighting
Active D-Lighting: Off Active D-Lighting: Y On
D
Active D-Lighting
Noise (randomly-spaced bright pixels, fog, or lines) may appear in pho-
tographs taken with Active D-Lighting. Uneven shading may be visible
with some subjects.
A
Active D-Lighting” Versus “D-Lighting”
The Active D-Lighting option in the shooting menu adjusts exposure
before shooting to optimize the dynamic range, while the D-Lighting
option in the playback menu (0 113) brightens shadows in images
after shooting.
145
i
Select On to preserve details in high-contrast scenes. Each time
a picture is taken, the camera quickly takes 2 shots at different
exposures and combines them to capture a wide range of tones,
from shadows to highlights. While the shots are combined, a
message is displayed and the shutter release is disabled. The
final photograph is displayed when processing is complete.
While HDR is in effect, Z appears in the display and continuous
shooting (0 63) is disabled.
HDR (High Dynamic Range)
+
First exposure (darker) Second exposure
(brighter)
Combined HDR image
D
HDR
The edges of the image will be cropped out and neither the built-in
flash nor optional flash units will fire. The desired results may not be
achieved if the camera or subject moves during shooting. Depending
on the scene, shading may be uneven and shadows may appear
around bright objects or halos around dark objects.
146
i
Photographs taken at slow shutter speeds are automatically pro-
cessed to reduce “noise” (bright spots, randomly-spaced bright
pixels, or fog), slightly increasing recording times. Selecting On
increases the amount of noise reduction performed at shutter
speeds slower than 1 s and increases the time required to record
images by roughly 1.5 to 2 times. During processing, a warning
will be displayed and pictures can not be taken (if the camera is
turned off before processing is complete, the picture will be
saved but noise reduction will not be performed). In continuous
release mode, frame rates will slow and while photographs are
being processed, the capacity of the memory buffer will drop.
Select On to reduce “noise” (randomly-spaced bright pixels,
lines, or fog). If Off is selected, noise reduction will only be per-
formed at high ISO sensitivities; the amount of noise reduction is
less than that performed when On is selected.
Long Exposure NR
High ISO Noise Reduction
147
i
Adjust movie sound recording settings for the built-in micro-
phone and optional ME-1 external microphones.
❚❚ Microphone
Select Microphone off to disable sound recording. Selecting
any other option enables recording and sets the microphone to
the selected sensitivity.
❚❚ Wind Noise Reduction
Select On to enable the low-cut filter, reducing noise produced
by wind blowing over the microphone (note that other sounds
may also be affected).
Movie Sound Options
A
The 2 Icon
Movies recorded with the microphone off are indicated by a 2 icon in
full-frame and movie playback.
A
Wind Noise Reduction
To disable wind noise reduction when using an optional ME-1 stereo
microphone, slide the microphone low-cut filter switch to FLAT and
select
Off for Wind noise reduction.
148
i
This option is available with 1 NIKKOR lenses that support vibra-
tion reduction (VR). The options available vary with the type of
lens: Normal/Active/Off for lenses that support active vibration
reduction and On/Off for other VR lenses. Choose Active, Nor-
mal, or On to reduce the effects of vibration; choose Active
when shooting from a moving vehicle or while walking or for
other forms of strong camera shake, Normal for the relatively
mild camera shake that occurs while standing still.
Vibration Reduction
A
Vibration Reduction
When the camera is panned, vibration reduction applies only to motion
that is not part of the pan (if the camera is panned horizontally, for
example, vibration reduction will be applied only to vertical shake),
making it much easier to pan the camera smoothly in a wide arc. The
composition may appear to change after the shutter is released, but
this does not indicate a malfunction.
149
i
Choose how the camera focuses.
* Shutter can only be released if camera is able to focus.
Focus Mode
AF-A
Auto-select AF: The camera automatically selects AF-S if the subject is
stationary, AF-C if it is moving.
AF-S
Single AF: For stationary subjects. Focus locks when the shutter-
release button is pressed halfway.
*
AF-C
Continuous AF: For subjects in motion. The
camera focuses continuously on the sub-
ject in the AF area brackets while the
shutter-release button is pressed half-
way (note that the AF area brackets are
only shown in the detailed display; 0 5).
Photos can be taken whether or not the
camera is in focus.
AF area brackets
AF-F
Full-time AF: For subjects in motion. The camera focuses continu-
ously; photos can be taken whether or not the camera is in focus.
MF
Manual focus: Focus manually (0 151). Photos can be taken whether
or not the camera is in focus.
A
Focus Mode
The options available vary with the shooting mode.
Shooting mode Focus mode
t, u, v, w AF-A (default), AF-S, AF-C, MF
Advanced movie
mode
HD movie AF-F (default), AF-S, MF
Slow motion AF-S (default), MF
150
i
A
Getting Good Results with Autofocus
Autofocus does not perform well under the conditions listed below.
The shutter release may be disabled if the camera is unable to focus
under these conditions, or the focus area may be displayed in green
and the camera may sound a beep, allowing the shutter to be released
even when the subject is not in focus. In these cases, focus manually
(0 151) or use focus lock (0 154) to focus on another subject at the
same distance, and then recompose the photograph.
There is little or no contrast between
the subject and the background.
The subject contains areas of sharply
contrasting brightness.
Example: The
subject is the
same color as
the back-
ground.
Examples: The
subject is half
in the shade; a
night scene
with point illu-
mination.
The subject contains objects at differ-
ent distances from the camera.
Background objects appear larger
than the subject.
Example: The
subject is
inside a cage.
Example: A
building is in
the frame
behind the
subject.
The subject is dominated by regular
geometric patterns.
The subject contains many fine details
or is made up of objects that are small
or lack variation in brightness.
Example: Blinds
or a row of
windows in a
skyscraper.
Example: A field
of flowers.
151
i
Manual Focus
Manual focus can be used when autofocus does not produce the
desired results.
1
Select manual focus.
2
Display the manual focus guides.
A
The AF-Assist Illuminator
If the subject is poorly lit, the AF-assist illumi-
nator will light automatically to assist the
autofocus operation when the shutter-
release button is pressed halfway.
The AF-
assist illuminator does not light in advanced
movie mode or during movie recording; in
other situations it lights only if:
AF-S is selected for focus mode or single AF
selected in AF-A focus mode,
Auto-area or Single-point is selected for AF-area mode (0 153),
and
On is selected for Built-in AF assist in the shooting menu (0 156).
Larger lenses may prevent the illuminator lighting all or part of the sub-
ject.
Remove lens hoods when using the illuminator.
Select Manual focus for Focus mode
(0 149).
Press J to magnify the view at the
center of the frame and display man-
ual focus guides (this feature is not
available during movie recording or in
slow-motion movie mode).
AF-assist illuminator
152
i
3
Focus.
Rotate the multi selector until the sub-
ject is in focus. Rotate the multi selec-
tor clockwise to increase the focus
distance, counterclockwise to
decrease; the faster you rotate the
multi selector, the quicker the focus
distance changes. The focus indicator
shows the approximate focus dis-
tance. Press J when the subject is in
focus.
To magnify the view in the display by
up to about 10× for precise focus,
rotate the command dial right. Press
1, 2, 3, or 4 to view areas of the
frame not currently visible in the dis-
play; the visible portion is shown by
the navigation window. To zoom out,
rotate the command dial left.
Multi selector dial: Focus
Command dial:
Zoom in or out
Focus indicator
Navigation window
A
Movies
The multi selector can also be used to choose the focus distance if man-
ual focus is selected during movie recording. Rotate the multi selector
clockwise to increase the focus distance, counterclockwise to decrease;
the faster you rotate the multi selector, the quicker the focus distance
changes.
A
Focal Plane Position
To determine the distance between your
subject and the camera, measure from the
focal plane mark on the camera body. The
distance between the lens mounting flange
and the focal plane is approximately 17 mm
(0.7 in.).
Focal plane mark
Approx.
17 mm
153
i
Choose how the focus area for autofocus is selected.
AF-Area Mode
e
Auto-
area
The camera automatically detects the subject and selects
the focus area.
c
Single-
point
Press J to view the focus area
selection display, then use the
multi selector to position the
focus area over your subject
and press J; the camera
focuses on the subject in the
selected focus area only.
Use
with stationary subjects.
Focus area
9
Subject
tracking
Press J to view the focus area
selection display, then use the
multi selector to position the
focus area over your subject
and press J. The focus area
will track the subject as it
moves through the frame. The
camera will focus on the
selected subject when the
shutter-release button is
pressed halfway. To end focus
tracking when shooting is
complete, press J.
Focus area
A
Subject Tracking
The camera may be unable to track subjects if they move quickly, leave
the frame or are obscured by other objects, change visibly in size, color,
or brightness, or are too small, too large, too bright, too dark, or similar
in color or brightness to the background.
154
i
Focus Lock
Focus lock can be used to change the composition after focusing
on the subject in the center of the frame, allowing you to focus
on a subject that will not be in the center of the final composi-
tion. If the camera is unable to focus using autofocus (0 150),
you can also focus on another subject at the same distance and
then use focus lock to recompose the photograph. Focus lock is
most effective when an option other than Auto-area is selected
for AF-area mode (0 153).
1
Focus.
Position the subject in the center of
the frame and press the shutter-
release button halfway to initiate
focus. Check that the focus area is dis-
played in green. If AF-S is selected for
focus mode (0 149), focus will lock
while the shutter-release button is
pressed halfway.
155
i
2
Lock focus.
With the shutter-release button
pressed halfway, press 1 (A) to lock
both focus and exposure (an AE-L/AF-L
indicator will be displayed; 0 129).
Focus will remain locked until 1 (A)
is pressed again, even if you later
remove your finger from the shutter-
release button.
3
Recompose the photograph and shoot.
Focus will remain locked between
shots.
Do not change the distance between the camera and the sub-
ject while focus lock is in effect. If the subject moves, press
1 (A) to end focus lock and then focus again at the new dis-
tance.
A
See Also
For information on changing the role of
the 1 (A) button, see page 163.
156
i
Choose On to enable face priority (0 27).
When On is selected, the built-in AF-
assist illuminator will light to illuminate
poorly-lit subjects if:
AF-S is selected for focus mode (0 149)
or single AF is selected in AF-A, and
Auto-area or Single-point is selected
for AF-area mode (0 153).
The AF-assist illuminator will not light to assist the focus opera-
tion in advanced movie mode, during movie recording, or when
Off is selected. If the AF-assist illuminator does not light, autofo-
cus may not produce the desired results when lighting is poor.
Face-Priority
Built-in AF Assist
A
See Also
See page 151 for information on using the AF-assist illuminator. Infor-
mation on the modes in which AF-assist is available may be found on
page 181.
AF-assist illuminator
157
i
Choose a flash control mode for the built-in and optional flash
units.
Flash Control
1 TTL
Flash output is adjusted automatically in response to shoot-
ing conditions (TTL flash control).
2 Manual
Choose a flash level between
Full
and
1/32
(
1
/
32
of full power). At full
power, the built-in flash has a guide
number of about 5/16 (m/ft, ISO
100, 20 °C/68 °F; at ISO 160, the
guide number is about 6.3/20.7).
A Y icon flashes in the display
during flash photography when
this option is selected.
158
i
Flash compensation alters flash output from the level suggested
by the camera, changing the brightness of the main subject rel-
ative to the background. Choose from values between –3 EV
(darker) and +1 EV (brighter) in increments of
1
/
3 EV; in general,
positive values make the subject brighter while negative values
make it darker.
A Y icon is displayed when flash com-
pensation is in effect. Normal flash out-
put can be restored by setting flash
compensation to ±0. Flash compensa-
tion is not reset when the camera is
turned off.
Flash Compensation
159
g
g
The Setup Menu
To display the setup menu, press G and select the setup
menu tab (B).
The setup menu contains the following options:
G button
Option Description Default 0
Reset setup options
Reset setup menu options to
default values.
160
Format memory card
Format the memory card.
161
Slot empty release
lock
Allow the shutter to be
released when no memory
card is inserted in the cam-
era.
Release locked 161
Display brightness Adjust display brightness. 0 161
Grid display Display a framing grid. Off 162
Auto power off
Choose the auto power off
delay.
1 min 162
Self-timer Choose the self-timer delay. 10 s 162
Remote control
Choose the remote control
mode shutter-release delay.
Quick response 163
Remote on duration
Choose how long the cam-
era waits for a signal from
an ML-L3 remote control.
10 min 163
Assign AE/AF-L
button
Choose the role played by
the 1 (A) button.
AE/AF lock 163
Shutter button AE
lock
Choose whether exposure
locks when the shutter-
release button is pressed
halfway.
Off 163
160
g
Select Ye s to reset all setup menu options other than Flicker
reduction, Time zone and date, and Language to default val-
ues.
HDMI device control
Choose whether remote
controls for HDMI-CEC
devices to which the cam-
era is connected can be
used to operate the cam-
era.
On 101
Flicker reduction Reduce flicker or banding. 164
Reset file numbering Reset file numbering. 164
Time zone and date Set the camera clock. Daylight saving time: Off 165
Language
Choose a language for the
camera displays.
165
Auto image rotation
Record camera orientation
with pictures.
On 166
Wireless mobile
adapter
Enable or disable the wire-
less mobile adapter.
79
GPS
Adjust settings for optional
GPS units.
Auto power off: Disable
Use GPS to set clock: Yes
77
Pixel mapping
Check and optimize the
camera image sensor and
image processors.
167
Firmware version
Display the current firm-
ware version.
167
Reset Setup Options
Option Description Default 0
161
g
Select Ye s to format the memory card. Note that this permanently
deletes all data on the card, including protected images; before
proceeding, be sure to copy important pictures and other data
to a computer (0 95). To exit without formatting the memory
card, highlight No and press J.
If Enable release is selected, the shutter can be released when
no memory card is inserted. No pictures will be recorded,
although they will be displayed in demo mode. Select Release
locked to enable the shutter only when a card is inserted.
Highlight Monitor brightness or View-
finder brightness and press 2 to display
brightness options for the selected dis-
play. Brightness can then be adjusted by
pressing 1 or 3; choose higher values
for increased brightness, lower values for
reduced brightness.
Format Memory Card
The message shown at right is displayed
while the card is formatted; do not remove
the memory card or remove or disconnect
the power source until formatting is com-
plete.
Slot Empty Release Lock
Display Brightness
162
g
Select On to display a framing grid (0 6).
Choose how long the displays remain on
when no operations are performed
(0 18). Choose shorter delays to reduce
the drain on the battery. Once the dis-
plays have turned off, they can be reacti-
vated by operating the camera buttons
or mode dial.
Choose the length of the self-timer shutter-release delay (0 65).
Choose 2s to reduce blur caused by the camera moving when
the shutter-release button is pressed, 10 s for self-portraits.
Grid Display
Auto Power Off
A
The GP-N100
To enable auto power off when an optional GP-N100 GPS unit is
attached, select Enable for the GPS > Auto power off option in the
setup menu (0 76).
Self-Timer
163
g
Choose how the camera responds to the shutter-release button
on the optional ML-L3 remote control (0 65). If Quick response
is selected, the shutter will be released immediately; if 2s delay
is selected, the shutter will be released after a 2 s delay.
Choose how long the camera will remain
active while waiting for a signal from the
remote control (0 63). Choose a shorter
delay to reduce the drain on the battery.
Note that remote control mode must be
reselected once the timer has expired.
Choose whether the 1 (A) button locks
both focus and exposure (AE/AF lock),
exposure only (AE lock only), or focus
only (AF lock only). Focus lock is
described on page 154, exposure lock on
page 129.
If On is selected, exposure will lock while
the shutter-release button is pressed
halfway.
Remote Control
Remote on Duration
Assign AE/AF-L Button
Shutter Button AE Lock
1 (A) button
164
g
Reduce flicker and banding in the displays and in movies while
shooting under fluorescent or mercury-vapor lighting. Choose a
frequency which matches that of the local AC power supply.
When a photograph is taken or a movie is
recorded, the camera names the file by
adding one to the number of the previ-
ous file (0 124). If the current folder is
numbered 999 and contains either 999
photographs or a photograph numbered
9999, the shutter-release button will be disabled and no further
photographs can be taken. To reset file numbering to 0001,
select Ye s for Reset file numbering and then either format the
current memory card or insert a new memory card.
Flicker Reduction
A
Flicker Reduction
If you are unsure as to the frequency of the local power supply, test
both options and choose the one that produces the best results. Flicker
reduction may not produce the desired results if the subject is very
bright, in which case you should select mode v or w and choose a
smaller aperture (larger f-number).
Reset File Numbering
165
g
Change time zones, set the camera clock,
choose the date display order, or turn
daylight saving time on or off (0 19).
Choose a language for camera messages and displays.
Time Zone and Date
Time zone
Choose a time zone. The camera clock is automatically set
to the time in the new time zone.
Date and time Set the camera clock.
Date format
Choose the order in which the day, month, and year are
displayed.
Daylight
saving time
Turn daylight saving time on or off. The camera clock will
automatically be advanced or set back one hour. The
default setting is Off.
Language
166
g
Photographs taken while On is selected contain information on
camera orientation, allowing them to be rotated automatically
during playback or when viewed in ViewNX 2 or Capture NX 2
(available separately; 0 171). The following orientations are
recorded:
Camera orientation is not recorded when Off is selected. Choose
this option when panning or taking photographs with the lens
pointing up or down.
Auto Image Rotation
Landscape (wide)
orientation
Camera rotated 90°
clockwise
Camera rotated 90°
counterclockwise
D
Auto Image Rotation
Image orientation is not recorded in movie or Motion Snapshot modes.
A
Rotate Tall
To automatically rotate “tall” (portrait-orientation) photographs for dis-
play during playback, select On for the Rotate tall option in the play-
back menu (0 112).
167
g
Check and optimize the camera image sensor and image proces-
sors if you notice unexpected bright spots in your pictures (note
that the camera comes with the sensor and processors already
optimized). Before performing pixel mapping as described
below, check that the battery is fully charged.
1
Attach a lens and lens cap.
Turn the camera off and attach a 1 NIKKOR lens. Do not
remove the lens cap.
2
Select Pixel mapping.
Turn the camera on, press G, and select Pixel mapping in
the setup menu.
3
Select Ye s .
Pixel mapping begins immediately. Note that other opera-
tions can not be performed while pixel mapping is in
progress. Do not turn the camera off or remove or disconnect
the power source until pixel mapping is complete.
4
Turn the camera off.
Turn the camera off when pixel mapping is complete.
View the current firmware version.
Pixel Mapping
Firmware Version
168
g
169
n
n
Technical Notes
Read this chapter for information on compatible accessories,
cleaning and storing the camera, and what to do if an error mes-
sage is displayed or you encounter problems using the camera.
At the time of writing, the following accessories were available
for your camera.
Optional Accessories
Lenses 1 mount lenses
Mount
adapters
Mount Adapter FT1: The FT1 allows NIKKOR F mount lenses to be
used with Nikon 1 interchangeable lens format digital cam-
eras. The angle of view of an F mount lens mounted on the
FT1 is equivalent to that of a 35 mm format lens with a focal
length about 2.7 × longer. See page 205 for information on
using the FT1. For information on attaching the FT1 and pre-
cautions for use, see the FT1 Mount Adapter User’s Manual. For
information on the lenses that can be used, see Compatible
NIKKOR F Mount Lenses. The FT1 Mount Adapter Users Manual
and Compatible NIKKOR F Mount Lenses are included with the
FT1.
Power
sources
Rechargeable Li-ion Battery EN-EL21 (0 12–14): Additional
EN-EL21 batteries are available from local retailers and
Nikon-authorized service representatives.
Battery Charger MH-28 (0 12): Recharge EN-EL21 batteries.
Power Connector EP-5D, AC Adapter EH-5b: These accessories can be
used to power the camera for extended periods (EH-5a and
EH-5 AC adapters can also be used). An EP-5D power connec-
tor is required to connect the camera to the EH-5b, EH-5a, or
EH-5; see page 174 for details.
170
n
Flash
units
SB-N5 (0 72): The SB-N5 has a Guide Number of 8.5/27.9 (m/ft,
ISO 100, 20 °C/68 °F; Guide Number at ISO 160 is 10.8/35.4).
When mounted on the Nikon 1 V2, it supports i-TTL and man-
ual flash control (0 157).
SB-N7 (0 72): The SB-N7 has a Guide Number of 18/59 (m/ft,
ISO 100, 20 °C/68 °F; Guide Number at ISO 160 is 22.8/74.8).
When mounted on the Nikon 1 V2, it supports i-TTL and man-
ual flash control (0 157).
A
Guide Number
To calculate the range of the flash at full power, divide the Guide
Number by the aperture. For example, at ISO 100 the SB-N5 has
a Guide Number of 8.5 m or 27.9 ft (35 mm zoom head position);
its range at an aperture of f/5.6 is 8.5÷5.6 or about 1.5 meters (or
in feet, 27.9÷5.6=approximately 5 ft). For each twofold increase
in ISO sensitivity, multiply the Guide Number by the square root
of two (approximately 1.4).
Remote
controls
Wireless Remote Control ML-L3 (0 65): The ML-L3 uses a 3 V CR2025
battery.
Pressing the battery-chamber latch to the right (q), insert a
fingernail into the gap and open the battery chamber (w).
Ensure that the battery is in the correct orientation (r).
171
n
Software Capture NX 2: A complete photo editing package offering such
features as white balance adjustment and color control points.
Note: Use the latest versions of Nikon software; see the websites
listed on page xvii for the latest information on supported oper-
ating systems. At default settings, Nikon Message Center 2 will
periodically check for updates to Capture NX 2 and other Nikon
software and firmware while you are logged in to an account on
the computer and the computer is connected to the Internet. A
message is automatically displayed when an update is found.
Body caps Body Cap BF-N1000: The body cap keeps the image sensor free of
dust when a lens is not in place.
Micro-
phones
Stereo Microphone ME-1 (0 147): Connect the ME-1 to the camera
microphone jack to record stereo sound while reducing the
noise caused by lens vibration being recorded during autofo-
cus.
GPS units GP-N100 (0 76): Record the time (UTC) and the camera’s current
latitude, longitude, and altitude with every picture taken.
Wireless
mobile
adapters
WU-1b (0 79): Create a wireless connection that can be used by
smart devices running the Wireless Mobile Utility to download
pictures or control the camera remotely.
172
n
Approved Memory Cards
The following cards have been tested and approved for use in
the camera. Cards with class 6 or faster write speeds are recom-
mended for movie recording. Recording may end unexpectedly
when cards with slower write speeds are used.
1 Check that any card readers or other devices with which the card will be
used support 2 GB cards.
2 Check that any card readers or other devices with which the card will be
used are SDHC-compliant. The camera supports UHS-1.
3 Check that any card readers or other devices with
which the card will be used are SDXC-compliant.
The camera supports UHS-1.
Other cards have not been tested. For more details on the above
cards, please contact the manufacturer.
SD cards SDHC cards
2
SDXC cards
3
SanDisk
2GB
1
4GB, 8GB, 16GB, 32GB
64 GB
Toshiba
Panasonic 48 GB, 64 GB
Lexar Media
4GB, 8GB, 16GB
Platinum II
4GB, 8GB, 16GB, 32GB
Professional
Full-HD Video 4GB, 8GB, 16GB
173
n
Approved Eye-Fi Cards
When inserted in the camera, Eye-Fi cards can be used to upload
photographs to a preselected destination. As of September
2012, the camera supports 8 GB Pro X2 SDHC cards. Eye-Fi cards
are for use only in the country of purchase in accordance with
local regulations. Eye-Fi cards may not be available in some
countries or regions; consult the manufacturer for more informa-
tion. Be sure the Eye-Fi card firmware has been updated to the
latest version.
Card status is indicated by an icon in the
display:
f (static): Eye-Fi upload enabled; wait-
ing to begin upload.
f (animated): Eye-Fi upload enabled;
uploading data.
e: Eye-Fi upload enabled but no pictures available for upload.
g: Error.
D
Eye-Fi Cards
Note that pictures will not be uploaded if signal strength is insufficient,
and that Eye-Fi upload is disabled during movie recording. In locations
in which wireless devices are prohibited, turn the camera off and
remove the card. See the manual provided with the Eye-Fi card, and
direct any inquiries to the manufacturer.
174
n
Attaching a Power Connector and AC Adapter
Turn the camera off before attaching an optional power connec-
tor and AC adapter.
1
Ready the camera.
Open the battery-chamber cover.
2
Insert the EP-5D power connector.
Be sure to insert the connector in the
orientation shown, using the connec-
tor to keep the orange battery latch
pressed to one side. The latch locks
the connector in place when the con-
nector is fully inserted.
3
Close the battery-chamber cover.
175
n
4
Connect the AC cable.
Connect the AC adapter AC cable to the AC socket on AC
adapter.
5
Connect the DC cable.
Open the camera power connector
cover and plug the AC adapter DC
cable securely into the DC socket on
the EP-5D. A P icon is displayed in
the monitor when the camera is pow-
ered by the AC adapter and power
connector.
176
n
Storage
If the camera will not be used for an extended period, remove
the battery and store it in a cool, dry area with the terminal cover
in place. To prevent mold or mildew, store the camera in a dry,
well-ventilated area. Do not store your camera with naphtha or
camphor moth balls or in locations that:
are poorly ventilated or subject to humidities of over 60%
are next to equipment that produces strong electromagnetic
fields, such as televisions or radios
are exposed to temperatures above 50 °C (122 °F) or below –10 °C
(14 °F)
Cleaning
Do not use alcohol, thinner, or other volatile chemicals.
Storage and Cleaning
Camera body
Use a blower to remove dust and lint, then wipe gently with
a soft, dry cloth. After using the camera at the beach or sea-
side, wipe off sand or salt with a cloth lightly dampened in
distilled water and dry thoroughly. Important: Dust or other
foreign matter inside the camera may cause damage not cov-
ered under warranty.
Lens,
viewfinder
These elements are easily damaged. Remove dust and lint
with a blower. If using an aerosol blower, keep the can ver-
tical to prevent the discharge of liquid. To remove finger-
prints and other stains, apply a small amount of lens cleaner
to a soft cloth and clean with care.
Monitor
Remove dust and lint with a blower. When removing finger-
prints and other stains, wipe the surface lightly with a soft
cloth or chamois leather. Do not apply pressure, as this
could result in damage or malfunction.
177
n
Do not drop: The product may malfunction if subjected to strong shocks or
vibration. Physical shocks may also cause the shutter to malfunction.
Keep dry: This product is not waterproof, and may malfunction if
immersed in water or exposed to high levels of humidity. Rusting of the
internal mechanism can cause irreparable damage.
Avoid sudden changes in temperature: Sudden changes in temperature, such
as those that occur when entering or leaving a heated building on a cold
day, can cause condensation inside the device. To prevent condensation,
place the device in a carrying case or plastic bag before exposing it to
sudden changes in temperature.
Keep away from strong magnetic fields: Do not use or store this device in the
vicinity of equipment that generates strong electromagnetic radiation
or magnetic fields. Strong static charges or the magnetic fields produced
by equipment such as radio transmitters could interfere with the dis-
plays, damage data stored on the memory card, or affect the product’s
internal circuitry.
Keep the lens mount covered: Be sure to attach the body cap if the camera is
without a lens.
Do not touch the image sensor: The image sensor is
easily damaged. Under no circumstances
should you exert pressure on the sensor, poke
it with cleaning tools, or subject it to powerful
air currents from a blower. These actions could
scratch or otherwise damage the sensor.
Turn the product off before removing or disconnecting the power source: Do not
unplug the product or remove the battery while the product is on or
while images are being recorded or deleted. Forcibly cutting power in
these circumstances could result in loss of data or in damage to product
memory or internal circuitry. To prevent an accidental interruption of
power, avoid carrying the product from one location to another while
the AC adapter is connected.
Caring for the Camera and Battery: Cautions
Image sensor
178
n
Cleaning: When cleaning the camera body, use a blower to gently remove
dust and lint, then wipe gently with a soft, dry cloth. After using the cam-
era at the beach or seaside, wipe off any sand or salt using a cloth lightly
dampened in pure water and then dry the camera thoroughly.
The lens is easily damaged. Dust and lint should be gently removed with
a blower. When using an aerosol blower, keep the can vertical to prevent
discharge of liquid. To remove fingerprints and other stains from the
lens, apply a small amount of lens cleaner to a soft cloth and wipe the
lens carefully.
Storage: To prevent mold or mildew, store the camera in a dry, well-venti-
lated area. If you are using an AC adapter, unplug the adapter to prevent
fire. If the product will not be used for an extended period, remove the
battery to prevent leakage and store the camera in a plastic bag contain-
ing a desiccant. Do not, however, store the camera case in a plastic bag,
as this may cause the material to deteriorate. Note that desiccant gradu-
ally loses its capacity to absorb moisture and should be replaced at reg-
ular intervals.
To prevent mold or mildew, take the camera out of storage at least once
a month. Turn the camera on and release the shutter a few times before
putting it away.
Store the battery in a cool, dry place. Replace the terminal cover before
putting the battery away.
Notes on the monitor and viewfinder: These displays are constructed with
extremely high precision; at least 99.99% of pixels are effective, with no
more than 0.01% being missing or defective. Hence while these displays
may contain pixels that are always lit (white, red, blue, or green) or
always off (black), this is not a malfunction and has no effect on images
recorded with the device.
Images in the monitor may be difficult to see in a bright light.
Do not apply pressure to the displays, as this could cause damage or
malfunction. Dust or lint on the displays can be removed with a blower.
Stains can be removed by wiping lightly with a soft cloth or chamois
leather. Should the monitor or viewfinder break, care should be taken to
avoid injury from broken glass and to prevent liquid crystal from the dis-
play touching the skin or entering the eyes and mouth.
179
n
Do not leave the lens pointed at the sun: Do not leave the lens pointed at the
sun or other strong light source for an extended period. Intense light
may cause the image sensor to deteriorate or produce a white blur effect
in photographs.
Moiré: Moiré is an interference pattern created by the interaction of an
image containing a regular, repeating grid, such as the pattern of weave
in cloth or windows in a building, with the camera image sensor grid. In
some cases, it may appear in the form of lines. If you notice moi in your
photographs, try changing the distance to the subject, zooming in and
out, or changing the angle between the subject and the camera.
Lines: Noise in the form of lines may in rare cases appear in pictures of
extremely bright or backlit subjects.
Batteries: Batteries may leak or explode if improperly handled. Observe
the following precautions when handling batteries:
Use only batteries approved for use in this equipment.
Do not expose the battery to flame or excessive heat.
Keep the battery terminals clean.
Turn the product off before replacing the battery.
Remove the battery from the camera or charger when not in use and
replace the terminal cover. These devices draw minute amounts of
charge even when off and could draw the battery down to the point
that it will no longer function. If the battery will not be used for some
time, insert it in the camera and run it flat before removing it and stor-
ing it in a location with an ambient temperature of 15 °C to 25 °C (59 °F
to 77 °F; avoid hot or extremely cold locations). Repeat this process at
least once every six months.
Turning the camera on and off repeatedly when the battery is fully dis-
charged will shorten battery life. Batteries that have been fully dis-
charged must be charged before use.
The internal temperature of the battery may rise while the battery is in
use. Attempting to charge the battery while the internal temperature is
elevated will impair battery performance, and the battery may not
charge or charge only partially. Wait for the battery to cool before
charging.
Continuing to charge the battery after it is fully charged can impair bat-
tery performance.
180
n
A marked drop in the time a fully charged battery retains its charge
when used at room temperature indicates that it requires replacement.
Purchase a new EN-EL21 battery.
Charge the battery before use. When taking photographs on impor-
tant occasions, ready a spare EN-EL21 battery and keep it fully charged.
Depending on your location, it may be difficult to purchase replace-
ment batteries on short notice. Note that on cold days, the capacity of
batteries tends to decrease. Be sure the battery is fully charged before
taking photographs outside in cold weather. Keep a spare battery in a
warm place and exchange the two as necessary. Once warmed, a cold
battery may recover some of its charge.
Used batteries are a valuable resource; recycle in accord with local reg-
ulations.
A
Image Sensor Cleaning
Each time it is turned on or off, the camera performs image sensor
cleaning to remove dust from the image sensor (note that operating
camera controls before cleaning is complete interrupts this process,
and that image sensor cleaning may be temporarily disabled if the
camera is turned on and off several times in succession). Dust not
removed by this method may appear in images recorded with the cam-
era, in which case you should have the sensor cleaned by Nikon-autho-
rized service personnel.
D
Servicing the Camera and Accessories
The camera is a precision device and requires regular servicing. Nikon
recommends that the camera be inspected by the original retailer or
Nikon-authorized service representative once every one to two years,
and that it be serviced once every three to five years (note that fees
apply to these services). Frequent inspection and servicing are particu-
larly recommended if the camera is used professionally. Any accesso-
ries regularly used with the camera, such as lenses or optional flash
units, should be included when the camera is inspected or serviced.
181
n
The following table lists the settings that can be adjusted in each
mode.
❚❚ C Auto, t, u, v, w, and u Best Moment Capture Modes
Available Settings
C t u v w u
Shooting menu
Exposure mode ——————
Image quality
1
1
1
1
1
Image size
2
1
1
1
1
1
Continuous ✔✔✔✔✔
Silent photography ✔✔✔✔✔✔
Number of shots saved —————
3
Frame rate ——————
Movie settings ✔✔✔✔
Movie before/after ——————
File format ——————
Metering
1
1
1
1
White balance ✔✔✔✔
ISO sensitivity
1
1
1
1
Picture Control ✔✔✔✔
Custom Picture Control ✔✔✔✔
Auto distortion control
1
1
1
1
1
Color space
1
1
1
1
1
Active D-Lighting
1
1
1
1
HDR
4
—————
Long exposure NR ✔✔✔✔✔
High ISO noise reduction ✔✔✔✔✔✔
Movie sound options ✔✔✔✔✔
Vibration reduction
5
✔✔✔✔✔✔
Focus mode
1
1
1
1
AF-area mode
1
1
1
1
Face-priority ✔✔✔✔
Built-in AF assist ✔✔✔✔✔✔
Flash control
6
7
7
7
7
Flash compensation
6
7
7
7
7
182
n
1 Has no effect on movies recorded with movie-record button.
2 NEF (RAW) images fixed at 4608 × 3072.
3 Smart Photo Selector mode only.
4 Not available at image qualities of NEF (RAW) or NEF (RAW) + JPEG fine.
5 VR lenses only.
6 Available only when built-in flash is raised or optional flash unit is used.
7 Not available when I is selected for Continuous/self-timer and 15 fps,
30 fps, or 60 fps is selected for Continuous.
Other settings
Focus area selection ✔✔✔✔
Flexible program
1
————
Autoexposure lock ✔✔✔——
Focus lock ✔✔✔✔
Self-timer ✔✔✔✔✔
Exposure compensation ✔✔✔✔——
Flash mode
6
✔✔✔✔✔
Advanced movie ——————
Theme ——————
C t u v w u
183
n
❚❚ vAdvanced Movie and z Motion Snapshot Modes
v z
t u v w h t u v w
Shooting menu
Exposure mode ✔✔✔✔✔✔✔✔✔
Image quality ————————
Image size —————————
Continuous —————————
Silent photography ✔✔✔✔✔✔✔✔✔
Number of shots saved ————————
Frame rate
1
1
1
1
—————
Movie settings
2
2
2
2
—————
Movie before/after ————✔✔✔✔✔
File format ————✔✔✔✔✔
Metering
2
2
2
2
✔✔✔✔
White balance ✔✔✔✔ ✔✔✔✔
ISO sensitivity ✔✔✔✔ ✔✔✔✔
Picture Control ✔✔✔✔ ✔✔✔✔
Custom Picture Control ✔✔✔✔ ✔✔✔✔
Auto distortion control ————————
Color space —————————
Active D-Lighting —————————
HDR —————————
Long exposure NR —————————
High ISO noise reduction ✔✔✔✔✔✔✔✔
Movie sound options
2
2
2
2
————
Vibration reduction
3
✔✔✔✔✔✔✔✔✔
Focus mode ✔✔✔✔—————
AF-area mode
2
2
2
2
✔✔✔✔
Face-priority
2
2
2
2
✔✔✔✔
Built-in AF assist ✔✔✔✔✔
Flash control —————————
Flash compensation —————————
184
n
1 Slow motion selected in advanced movie mode.
2 HD movie selected in advanced movie mode.
3 VR lenses only.
Other settings
Focus area selection
2
2
2
2
✔✔✔✔
Flexible program ————————
Autoexposure lock ✔✔✔——✔✔
Focus lock ✔✔✔✔ ✔✔✔✔
Self-timer ✔✔✔✔—————
Exposure compensation ✔✔✔——✔✔✔
Flash mode —————————
Advanced movie ✔✔✔✔—————
Theme ✔✔✔✔✔
v z
t u v w h t u v w
185
n
Defaults for the options in the playback, shooting, and setup
menus may be found on pages 109, 119, and 159, respectively.
Defaults for other settings are listed below.
* Not displayed when Auto-area is selected for AF-area mode.
Defaults
Option Default
Focus area (0 153) Center
*
Flexible program (0 34) Off
Autoexposure lock (0 129) Off
Focus lock (0 154) Off
Continuous/self-timer (0 63) 8 (single frame)
Exposure compensation (0 68) 0.0
Flash mode (0 69) Fill flash
Best moment capture (0 43) Slow view
Advanced movie (0 49) HD movie
Theme (0 61) Beauty
Picture Control settings (0 136) Unmodified
186
n
The following table shows the number of pictures or amount of
movie footage that can be stored on a 16 GB Toshiba SD-E016GUX
UHS-I SDHC card at different image quality, size, or movie set-
tings. All figures are approximate; file size varies with the scene
recorded.
❚❚ C Auto, t, u, v, w, Slow View, and Smart Photo Selector
1
1 Off selected for Silent photography and Number of shots saved set to 1.
2 Maximum number of pictures that can be stored in memory buffer at
ISO 160. Drops if long exposure noise reduction is on (0 146).
3 Image size applies to JPEG images only. Size of NEF (RAW) images can not
be changed. File size is the total for NEF (RAW) and JPEG images.
Memory Card Capacity
Image quality
(0 123)
Image size
(0 123)
File size No. of images Buffer capacity
2
NEF (RAW) +
JPEG fine
3
4608 × 3072 26.6 MB 591 48
3456 × 2304 23.1 MB 682 48
2304 × 1536 20.5 MB 766 49
NEF (RAW) 17.4 MB 902 50
JPEG fine
4608 × 3072 9.2 MB 1700 54
3456 × 2304 5.6 MB 2700 60
2304 × 1536 3.1 MB 5000 71
JPEG normal
4608 × 3072 4.6 MB 3300 63
3456 × 2304 2.9 MB 5400 76
2304 × 1536 1.6 MB 9800 98
JPEG basic
4608 × 3072 2.4 MB 6600 80
3456 × 2304 1.5 MB 10700 100
2304 × 1536 0.8 MB 18600 100
187
n
❚❚ Smart Photo Selector
1
1 Number of shots saved set to 5. File size is total for 5 images.
2 Image size applies to JPEG images only. Size of NEF (RAW) images can not
be changed. File size is the total for NEF (RAW) and JPEG images.
❚❚ HD Movies
* For information on the maximum length that can be recorded in a single
clip, see page 126.
❚❚ Slow Motion Movies
* Up to 3 s of slow motion footage can be recorded in a single clip. Playback
length is about 13.2 (400 fps) or 40 (1200 fps) times the recorded length.
❚❚ Motion Snapshots
* File size is the total for a single photograph and movie.
Image quality (0 123) Image size (0 123) File size No. of shots
NEF (RAW) + JPEG fine
2
4608 × 3072 133.1 MB 118
3456 × 2304 115.4 MB 136
2304 × 1536 102.7 MB 153
NEF (RAW) 87.1 MB 180
JPEG fine
4608 × 3072 45.9 MB 342
3456 × 2304 28.2 MB 557
2304 × 1536 15.6 MB 1000
JPEG normal
4608 × 3072 23.2 MB 679
3456 × 2304 14.3 MB 1000
2304 × 1536 8.0 MB 1900
JPEG basic
4608 × 3072 11.8 MB 1300
3456 × 2304 7.4 MB 2100
2304 × 1536 4.2 MB 3700
Movie settings (0 126) Maximum total length (approx.)
*
1080/60i 1 hour 28 minutes
1080/30p 1 hour 28 minutes
720/60p 2 hours 12 minutes
720/30p 2 hours 56 minutes
Frame rate (0 125) Maximum total recorded length (approx.)
*
400 fps 1 hour 4 minutes
1200 fps 2 hours 8 minutes
Image quality Image size Format (0 128) File size No. of shots
——NMS21.6 MB
*
729
MOV 30.8 MB 510
188
n
If the camera fails to function as expected, check this list of com-
mon problems before consulting your retailer or Nikon repre-
sentative.
Battery/Display
Troubleshooting
The camera is on but does not respond: Wait for recording or any other process-
ing to end. If the problem persists, turn the camera off. If the camera still
does not respond, remove and replace the battery or disconnect and
reconnect the AC adapter, but note that this will delete any data not yet
saved. Data already saved to the memory card are unaffected.
The displays are off:
The camera is off (0 18) or the battery is exhausted (0 12, 21).
The monitor has been turned off (0 5). Press the $ button to turn
the monitor on.
An object has come close to the eye sensor, turning the viewfinder on
and the monitor off (0 6).
The displays have turned off automatically to save power (0 162). The
displays can be reactivated by operating buttons or the mode dial.
The camera is connected to a computer (0 95) or television (0 100).
The displays turn off without warning:
The battery is low (0 12, 21).
The displays have turned off automatically to save power (0 162). The
displays can be reactivated by operating buttons or the mode dial.
The camera’s internal temperature is high (0 xvi, 194). Wait for the
camera to cool before turning it on again.
The viewfinder is out of focus: Focus the viewfinder using the diopter adjust-
ment control (0 6).
Indicators are not displayed: Press the $ button (0 5).
189
n
Shooting (All Modes)
The camera takes time to turn on: Delete files or format the memory card.
The shutter-release is disabled:
The battery is exhausted (0 12, 21).
The memory card is locked (0 15) or full (0 21).
The flash is charging (0 69).
The camera is not in focus (0 24).
You are currently filming a slow motion movie (0 51).
Only one picture is taken each time the shutter-release button is pressed in continuous
release mode: 5 fps is selected for Continuous and the built-in flash is
raised.
The camera does not focus automatically:
The subject is not suited to autofocus (0 150).
The camera is in manual focus mode (0 149, 151).
Focus does not lock when the shutter-release button is pressed halfway: Use the 1
(A) button to lock focus when AF-C is selected for focus mode or when
photographing moving subjects in AF-A mode (0 149, 154).
Focus area selection is unavailable: Focus area selection is not available in
auto-area AF (0 153) or face priority (0 27). In other AF-area modes, the
focus area can be selected by pressing J.
Subject-tracking AF not available: Select a non-monochrome Picture Control
(0 136, 153).
AF-area mode selection is unavailable: The camera is in auto or best moment
capture mode (0 41), manual focus mode is selected (0 149), or the h
Scene auto selector is used (0 122).
Image size selection is unavailable: NEF (RAW) is selected for image quality
(0 123).
The camera is slow to record photos: Turn long exposure noise reduction off
(0 146).
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appears in photos:
Lower ISO sensitivity or enable high ISO noise reduction (0
146).
Use long exposure noise reduction at shutter speeds slower than 1 s
(0 146).
No photo taken when ML-L3 remote control shutter-release button is pressed:
Replace battery in remote control (0 170).
Choose a remote control mode (0 63).
The remote control standby timer has expired (0 163).
The remote is not pointed at the camera or the infrared receiver is not
visible (0 2, 66).
The remote is too far from the camera (0 66).
Bright light is interfering with remote.
190
n
Shooting (t, u, v, and w Modes)
Movies
Smudges appear in photographs: Clean the front and rear lens elements.
Flicker or banding appears in movies or in the displays: Choose a Flicker reduc-
tion setting that matches the local AC power supply (0 164).
No flash: The camera is in best moment capture or Motion Snapshot mode
or is recording a movie, or I is selected for Continuous/self-timer
(0 63) and the Continuous is 15 fps or above (0 125).
Menu items are unavailable: Some options are only available in particular
shooting or exposure modes (0 181) or when the built-in flash is raised
(0 69) or a flash, GPS unit, or wireless mobile adapter is attached (0 72,
76, 79).
The shutter release is disabled: You selected mode u after choosing a shutter
speed of “Bulb” in mode w (0 35).
Some shutter speeds are not available: You are using a flash.
Colors are unnatural:
Adjust white balance to match the light source (0 130).
Adjust Picture Control settings (0 136).
Cannot measure white balance: The subject is too dark or too bright (0 133).
Picture Controls produce varying results: A (auto) is selected for sharpening,
contrast, or saturation. For consistent results over a series of photos,
choose another setting (0 138).
Metering can not be changed: Exposure lock is in effect (0 129).
Noise (reddish areas and other artifacts) appears in long time-exposures: Enable
long-exposure noise reduction (0 146).
Cannot record movies: The movie-record button can not be used to record
movies in best moment capture or Motion Snapshot mode (0 48, 61).
No sound is recorded for movies:
Microphone off is selected for Movie sound options > Microphone
(0 147).
Live audio is not recorded with slow-motion movies (0 53) or Motion
Snapshots (0 59).
191
n
Playback
Miscellaneous
NEF (RAW) images are not displayed: The camera displays only the JPEG copies
of NEF (RAW) + JPEG fine images (0 123).
Tall” (portrait) orientation photos are displayed in “wide” (landscape) orientation:
Select On for Rotate tall (0 112).
The photos were taken with Auto image rotation off (0 166).
Camera was pointed up or down when the photo was taken (0 166).
Photo is displayed in image review (0 112).
Cannot hear movie sound:
Rotate the command dial right to raise the volume (0 56). If the cam-
era is connected to a television (0 100), use the controls for the TV to
adjust the volume.
Live audio is not recorded with slow-motion movies (0 53) or Motion
Snapshots (0 61).
Cannot delete images:
Remove protection from the files before deletion (0 112).
The memory card is locked (0 15).
Cannot select photos for printing: The memory card is full (0 21) or locked
(0 15) or the photos are in NEF (RAW) format. To print NEF (RAW) pho-
tos, transfer the pictures to a computer and use the supplied software or
Capture NX 2 (0 95).
Pictures are not displayed on TV: The camera is not correctly connected
(0 100).
Pictures cannot be transferred to a computer: If your system does not meet the
requirements on page 93, you may still be able to transfer pictures to the
computer using a card reader.
Photos are not displayed in Capture NX 2: Update to the latest version (0 171).
The date of recording is not correct: Set the camera clock (0 19, 165).
Menu items are unavailable: Some options are only available at particular
settings (0 181) or when a memory card is inserted (0 14).
192
n
This section lists the error messages that appear in the display.
Error Messages
Message Solution 0
(Shutter-speed or
aperture display
flashes)
If the subject is too bright, lower ISO
sensitivity or choose a faster shutter
speed or smaller aperture (higher
f-number).
35, 36,
37, 135
If the subject is too dark, raise ISO sen-
sitivity, use a flash, or choose a slower
shutter speed or larger aperture (lower
f-number).
35, 36,
37, 69,
72, 135
Keeping the zoom ring
button pressed, rotate
the zoom ring to
extend the lens.
A lens with a retractable lens barrel
button is attached with the lens barrel
retracted. Press the retractable lens
barrel button and rotate the zoom ring
to extend the lens.
17, 202
Check lens. Pictures
can only be taken
when a lens is
attached.
Attach a lens. 17
Cannot take pictures.
Insert fully-charged
battery.
Turn the camera off and recharge the
battery or insert a fully charged spare
battery.
12, 14
Start-up error. Turn the
camera off and then
on again.
Turn the camera off, remove and
replace the battery, and then turn the
camera on.
14, 18
The clock has been
reset.
Set the camera clock. 19, 165
No memory card.
Turn the camera off and confirm that
the card is correctly inserted.
14
This memory card is
not formatted. Format
the memory card?
Select Ye s to format the card, or turn
the camera off and insert another
memory card.
14, 161
Memory card is locked
(write protected).
Turn the camera off and slide the card
write-protect switch to the “write
position.
15
193
n
Eye-Fi cards cannot be
used with the write
protect switch in the
“lock” position.
Turn the camera off and slide the card
write-protect switch to the “write”
position.
173
Memory card is full.
You may be able to record additional
images if you reduce image quality or
size.
123
Delete unwanted images. 87
Insert another memory card. 14, 172
This memory card
cannot be used. Card
may be damaged;
insert a different card.
Use an approved card. 172
Format the card. If the problem per-
sists, the card may be damaged. Con-
tact a Nikon-authorized service
representative.
161
Insert a new memory card. 14, 172
Cannot create
additional folders on
memory card.
If the current folder is numbered 999 and
contains either 999 photographs or a
photograph numbered 9999, the shut-
ter-release button will be disabled and
no further photographs can be taken.
Choose
Ye s
for
Reset file numbering
and then either format the current mem-
ory card or insert a new memory card.
164
The movie-record
button cannot be used
in this mode.
The movie-record button can not be
used in best moment capture or
Motion Snapshot modes.
48, 61
Photographs cannot
be recorded in this
mode.
The shutter-release button can not be
used to take photographs while a
slow-motion movie is being recorded.
51
The capture
illuminator has been
used consecutively for
the maximum time
and has turned off.
The capture illuminator on the
optional SB-N5 flash unit turns off
automatically after extended use.
Remove your finger from the shutter-
release button for a short period.
74
Photographs cannot be
taken in shutter- priority
auto mode at a shutter
speed of “Bulb.
Choose a different shutter speed, or
select mode w.
35, 37
Message Solution 0
194
n
* See the printer manual for more information.
Failed to update
speedlight firmware.
Try again after turning
the camera off and on.
Turn the camera off and then on again
and reattempt the update. If the prob-
lem persists or reoccurs frequently,
contact a Nikon-authorized service
representative.
Failed to update lens
firmware. Try again
after turning the
camera off and on.
Turn the camera off and then on again
and reattempt the update. If the prob-
lem persists or reoccurs frequently,
contact a Nikon-authorized service
representative.
An error has occurred.
Press the shutter-
release button again.
Press the shutter-release button. Con-
tact a Nikon-authorized service repre-
sentative if the problem persists or re-
occurs frequently.
An error has occurred
in the internal circuitry.
Try again after turning
the camera off and on.
Turn the camera off and then on again.
If the problem persists or reoccurs fre-
quently, contact a Nikon-authorized
service representative.
The camera’s internal
temperature is high.
The camera will now
turn off.
Wait for the camera to cool. xvi
Memory card contains
no images.
To view pictures, insert a memory card
containing images.
14
Cannot display this file.
The file has been created or modified
on a computer or different make of
camera, or is corrupt.
Check printer. Check the printer.
*
Check paper.
Select Resume after loading paper of
the correct size.
*
Paper jam. Clear the jam and select Resume.—
*
Out of paper. Insert paper and select Resume.—
*
Check ink supply. Select Resume after checking the ink.
*
Out of ink. Replace the ink and select Resume.—
*
Message Solution 0
195
n
Nikon 1 V2 Digital Camera
Specifications
Type
Type Digital camera with support for interchangeable
lenses
Lens mount Nikon 1 mount
Effective angle of view Approx. 2.7× lens focal length (35 mm format
equivalent)
Effective pixels
14.2 million
Image sensor
Image sensor 13.2 mm × 8.8 mm CMOS sensor (Nikon CX for-
mat)
Dust-reduction system Image sensor cleaning
Storage
Image size (pixels) Still images (C, t, u, v, w, u modes; aspect ratio 3 : 2)
4608 × 3072 3456 × 2304
2304 × 1536
Still images (v mode; aspect ratio 3 : 2)
4608 × 3072 (1080/60i, 1080/30p)
1280 × 856 (720/60p, 720/30p)
Still images (Motion Snapshots; aspect ratio 16 : 9)
4608 × 2592
File format NEF (RAW): 12-bit, compressed
JPEG: JPEG-Baseline compliant with fine (approx.
1:4), normal (approx. 1 : 8), or basic (approx. 1 : 16)
compression
NEF (RAW) + JPEG: Single photograph recorded in
both NEF (RAW) and JPEG formats
Picture Control system Standard, Neutral, Vivid, Monochrome, Portrait,
Landscape; selected Picture Control can be mod-
ified; storage for custom Picture Controls
Media SD (Secure Digital), SDHC, and SDXC memory cards
File system DCF (Design Rule for Camera File System) 2.0, DPOF (Digi-
tal Print Order Format), Exif (Exchangeable Image File Format
for Digital Still Cameras) 2.3, PictBridge
196
n
Electronic viewfinder
Electronic viewfinder 0.47-in., approx. 1440k-dot color TFT LCD viewfinder
with diopter control and brightness adjustment
Frame coverage Approx. 100% horizontal and 100% vertical
Eyepoint 18 mm (–1.0 m
–1
; from center surface of view-
finder eyepiece lens)
Diopter adjustment –3+2 m
–1
Eye sensor Camera switches to viewfinder display when it
detects that viewfinder is in use
Shooting modes
C auto, t programmed auto, u shutter-priority
auto, v aperture-priority auto, w manual,
u best moment capture (slow view and Smart
Photo Selector), v advanced movie (HD and
slow motion), z Motion Snapshot
Shutter
Type Electronically-controlled vertical-travel focal-
plane mechanical shutter; electronic shutter
Speed Mechanical shutter:
1
/
4000 30 s in steps of
1
/
3 EV;
Bulb; Time (requires optional ML-L3 remote control)
Electronic shutter:
1
/
16,000 30 s in steps of
1
/
3 EV;
Bulb; Time (requires optional ML-L3 remote control)
Note: Bulb and Time end automatically after approximately 2 min-
utes
Flash sync speed Mechanical shutter: Synchronizes with shutter at
X=
1
/
250 s or slower
Electronic shutter: Synchronizes with shutter at
X=
1
/
60 s or slower
Release
Mode Single frame, continuous
Self-timer, remote
Frame advance rate Approximately 5, 15, 30, or 60 fps
Self-timer 2s, 10s
Remote control modes Delayed remote (2 s); quick-response remote
197
n
Exposure
Metering TTL metering using image sensor
Metering method Matrix
Center-weighted: Meters 4.5 mm circle in center of
frame
Spot: Meters 2 mm circle centered on selected
focus area
Mode t programmed auto with flexible program;
u shutter-priority auto; v aperture-priority auto;
w manual; h scene auto selector
Exposure compensation –3+3 EV in increments of
1
/
3 EV (user controlled in
C auto, t, u, and v modes)
Exposure lock Luminosity locked at metered value with A
(AE-L/AF-L) button
ISO sensitivity
(Recommended Exposure
Index)
ISO 1606400 in steps of 1 EV; auto ISO sensitiv-
ity control (ISO 160– 6400, 160– 3200, 160800) available
(user controlled in t, u, v, and w modes)
Active D-Lighting On, off
Focus
Autofocus Hybrid autofocus (phase detection/contrast-
detect AF); AF-assist illuminator
Lens servo Autofocus (AF): Single AF (AF-S); continuous AF
(AF-C); auto AF-S/AF-C selection (AF-A); full-
time AF (AF-F)
Manual focus (MF)
AF-area mode Single-point, auto-area, subject tracking
Focus area Single-point AF: 135 focus areas; the center 73
areas support phase-detection AF
Auto-area AF: 41 focus areas
Focus lock Focus can be locked by pressing shutter-release
button halfway (single AF) or by pressing A (AE-
L/AF-L) button
Face priority On, off
198
n
Flash
Built-in flash Raised by pressing flash button
Guide Number (GN) Approx. 5/16 (m/ft, ISO 100, 20 °C/68 °F; at ISO
160, Guide Number is approx. 6.3/20.7)
Control i-TTL flash control using image sensor
Mode Fill flash, fill flash + slow sync, red-eye reduction,
red-eye reduction + slow sync, rear-curtain sync,
rear curtain + slow sync
Flash compensation –3+1 EV in increments of
1
/
3 EV
Flash-ready indicator Lights when flash is fully charged
White balance
Auto, incandescent, fluorescent, direct sunlight,
flash, cloudy, shade, preset manual, all except
preset manual with fine tuning
Movie
Metering TTL metering using image sensor
Metering method Matrix
Center-weighted: Meters 4.5 mm circle in center of
frame
Spot: Meters 2 mm circle centered on selected
focus area
Frame size (pixels)/
recording rate
HD movies and movies recorded in C, t, u, v, and w
modes (aspect ratio 16 : 9)
1920 × 1080/60i (59.94 fields/s
*
)
1920 × 1080/30p (29.97 fps)
1280 × 720/60p (59.94 fps)
1280 × 720/30p (29.97 fps)
Slow-motion movies (aspect ratio 8 : 3)
640 × 240/400 fps (plays at 30p/29.97 fps)
320 × 120/1200 fps (plays at 30p/29.97 fps)
Motion Snapshot (aspect ratio 16 : 9)
1920 × 1080/60p (59.94 fps) (plays at 24p/23.976 fps)
File format MOV
Video compression H.264/MPEG-4 Advanced Video Coding
Audio recording format AAC
Audio recording device Built-in or optional external ME-1 stereo micro-
phone; sensitivity adjustable
* Sensor output is about 60 fps.
199
n
Monitor
7.5 cm (3-in.), approx. 921k-dot, TFT LCD with
brightness adjustment
Playback
Full-frame and thumbnail (4, 9, or 72 images or
calendar) playback with playback zoom, movie
playback, slide show, histogram display, auto
image rotation, and rating option
Interface
USB Hi-Speed USB
HDMI output Type C mini-pin HDMI connector
Multi accessory port Used for designated accessories
Audio input Stereo mini-pin jack (3.5 mm diameter)
Supported languages
Arabic, Chinese (Simplified and Traditional),
Czech, Danish, Dutch, English, Finnish, French,
German, Greek, Hindi, Hungarian, Indonesian,
Italian, Japanese, Korean, Norwegian, Polish, Por-
tuguese (European and Brazilian), Romanian,
Russian, Spanish, Swedish, Thai, Turkish, Ukrai-
nian, Vietnamese
Power source
Battery One rechargeable Li-ion EN-EL21 battery
AC adapter EH-5b AC adapter; requires EP-5D power connec-
tor (available separately)
Tripod socket
1
/
4-in. (ISO 1222)
Dimensions/weight
Dimensions (W × H × D) Approx. 107.8 × 81.6 × 45.9 mm (4.2 × 3.2 ×
1.8 in.), excluding projections; thickness of body
(from mount to monitor) is 33.2 mm (1.3 in.)
Weight Approx. 337 g (11.9 oz) with battery and memory
card but without body cap; approx. 278 g (9.8 oz),
camera body only
200
n
Unless otherwise stated, all figures are for a camera with a fully-charged bat-
tery operating at the temperature specified by the Camera and Imaging
Products Association (CIPA): 23 ±3 °C (73.4 ±5.4 °F).
Nikon reserves the right to change the specifications of the hardware and
software described in this manual at any time and without prior notice.
Nikon will not be held liable for damages that may result from any mistakes
that this manual may contain.
Operating environment
Temperature 0 °C40 °C (+32 °F104 °F)
Humidity 85% or less (no condensation)
MH-28 battery charger
Rated input AC 100240 V, 50–60 Hz, 0.2 A
Rated output DC 8.4 V/0.6 A
Supported batteries Nikon EN-EL21 rechargeable Li-ion batteries
Charging time Approx. 2 hours at an ambient temperature of
25 °C (77 °F) when no charge remains
Operating temperature 0 °C40 °C (+32 °F–104 °F)
Dimensions (W × H × D) Approx. 67.0 × 28.0 × 104.0 mm (2.6 × 1.1 × 4.1
in.), excluding plug adapter
Weight Approx. 88 g (3.1 oz), excluding plug adapter
EN-EL21 rechargeable Li-ion battery
Type Rechargeable lithium-ion battery
Rated capacity 7.2V, 1485mAh
Operating temperature 0 °C–40 °C (+32 °F104 °F)
Dimensions (W × H × D) Approx. 37.6 × 49.7 × 18.1 mm (1.5 × 2.0 × 0.7 in.)
Weight Approx. 57 g (2.0 oz), excluding terminal cover
201
n
Specifications subject to change without notice. Nikon will not be held liable
for damages that may result from any mistakes that this manual may contain.
1 NIKKOR VR 10–30mm f/3.5–5.6
Type 1 mount lens
Focal length 1030 mm
Maximum aperture f/3.55.6
Construction 12 elements in 9 groups (including 3 aspherical elements)
Angle of view 77°29° 40
Vibration reduction Lens shift using voice coil motors (VCMs)
Minimum focus distance 0.2 m (0.7 ft) from focal plane at all zoom positions
Diaphragm blades 7 (rounded diaphragm opening)
Diaphragm Fully automatic
Aperture range 10 mm focal length: f/3.516
30 mm focal length: f/5.6–16
Filter-attachment size 40.5 mm (P=0.5 mm)
Dimensions Approx. 57.5 mm diameter × 42 mm (distance from
camera lens mount flange when lens is retracted)
Weight Approx. 115 g (4.1 oz)
1 NIKKOR 11–27.5mm f/3.5–5.6
Type 1 mount lens
Focal length 11–27.5 mm
Maximum aperture f/3.5–5.6
Construction 8 elements in 6 groups (including 1 ED lens element and
1 aspherical lens element), 1 protective glass element
Angle of view 72°32° 20
Minimum focus distance 0.3 m (1.0 ft) from focal plane at all zoom positions
Diaphragm blades 7 (rounded diaphragm opening)
Diaphragm Fully automatic
Aperture range 11 mm focal length: f/3.516
27.5 mm focal length: f/5.6–16
Filter-attachment size 40.5 mm (P=0.5 mm)
Dimensions Approx. 57.5 mm diameter × 31 mm (distance from
camera lens mount flange when lens is retracted)
Weight Approx. 83 g (3.0 oz)
202
n
❚❚ 1 NIKKOR Lenses
1 NIKKOR VR 10–30mm f/3.5–5.6
1 NIKKOR 11–27.5mm f/3.5–5.6
Lens hood mounting mark
Zoom ring
Lens mounting mark
CPU contacts
Focal length mark
Focal length scale
Retractable lens barrel button
Lens cap
Zoom ring
Lens mounting mark
CPU contacts
Focal length mark
Focal length scale
Retractable lens barrel button
Lens cap
203
n
1 NIKKOR lenses are exclusively for Nikon 1 interchangeable lens
format digital cameras. The angle of view is equivalent to a
35 mm format lens with a focal length about 2.7× longer. The
1 NIKKOR VR 10–30mm f/3.5–5.6 supports normal and active
vibration reduction and vibration reduction off (0 148).
Use the zoom ring to zoom in and out.
A
Detaching the Lens
Before removing or exchanging lenses,
retract the lens and turn the camera off
(0 17). To remove the lens, press and hold
the lens release button (q) while turning the
lens clockwise (w). After removing the lens,
replace the lens caps and camera body cap.
A
Lens Care
When using an optional lens hood, do not pick up or hold the lens or
camera using only the hood.
Keep the CPU contacts clean.
Use a blower to remove dust and lint from the lens surfaces. To
remove smudges and fingerprints, apply a small amount of ethanol or
lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and
clean from the center outwards using a circular motion, taking care
not to leave smears or touch the glass with your fingers.
Never use organic solvents such as paint thinner or benzene to clean
the lens.
A lens hood or NC filter can be used to protect the front lens element.
Attach the front and rear caps when the lens is not in use.
If the lens will not be used for an extended period, store it in a cool,
dry location to prevent mold and rust. Do not store in direct sunlight
or with naphtha or camphor moth balls.
Keep the lens dry. Rusting of the internal mechanism can cause irrep-
arable damage.
Leaving the lens in extremely hot locations could damage or warp
parts made from reinforced plastic.
204
n
A
Supplied Accessories
40.5 mm snap-on Front Lens Cap LC-N40.5
Rear Lens Cap LF-N1000
A
Optional Accessories
40.5 mm screw-on filters
Bayonet Hood HB-N101 (for use with the 1 NIKKOR VR 10–30mm
f/3.5–5.6; attaches as shown below).
40.5 mm screw-on Hood HN-N102 (for use with the 1 NIKKOR
11–27.5mm f/3.5–5.6; attaches as shown below)
205
n
❚❚ The Optional FT1 Mount Adapter
Read this section for information on using the optional FT1
mount adapter. Before proceeding, be sure that you have read
and understood this manual and the documentation for the FT1
and lenses.
Autofocus
Autofocus is available only with AF-S lenses; other lenses sup-
port manual focus only. Set the camera focus mode to AF-S (the
camera will not focus in other autofocus modes). The only AF-
area mode available is Single-point and the camera focuses on
the subject in the center focus area only. Face priority is not sup-
ported. In some cases, a beep may sound, the in-focus indicator
may be displayed, and pictures can be taken when the camera is
not in focus; if this occurs, focus manually.
Manual Focus
Follow the steps below to focus manually when using the FT1
with a NIKKOR F mount lens.
1
Select manual focus mode.
Select Manual focus for Focus mode in the shooting menu.
2
Focus.
Rotate the lens focus ring until the
subject is in focus.
If the lens supports autofocus with manual override, after
focusing using autofocus you can keep the shutter-release
button pressed halfway and rotate the lens focus ring to fine-
tune focus manually. To refocus using autofocus, press the
shutter-release button halfway again.
206
n
The Electronic Rangefinder
Note that with some subjects, the in-focus indicator (I) may be
displayed when the camera is not in focus. Check focus in the
display before shooting.
To zoom in on the display for more
precise focus, press J (note that this
feature is not available during movie
recording or in slow-motion movie
mode). A navigation window will
appear in a gray frame at the bottom
right of the display.
Navigation window
Rotate the command dial right to
zoom in to a maximum of 10×, left to
zoom out. Use the multi selector to
scroll to areas of the frame not visible
in the display. Press J to exit zoom.
Command dial
If a CPU lens is attached in manual focus
mode, the focus indicator can be used to
check whether the camera is focused on
the subject in the center focus area.
Focus indicator Status
I In focus.
2 Camera focused in front of subject.
4 Camera focused behind subject.
24
Unable to determine focus.
(flashes)
207
n
Error Messages and Displays
The following warnings appear in the camera aperture display.
Restrictions
Auto and best moment capture modes are not supported.
Motion Snapshots can be recorded only when an AF-S lens is
attached and AF-S (Single AF) is selected for focus mode and
then only when the camera is in focus. Do not attempt to
adjust focus using the focus ring.
Shutter speeds of 1 s or slower are not available when Silent
photography is On.
The sound monitor switch and focus operation button (Focus
Lock/MEMORY RECALL/AF Start) have no effect.
Precautions for Use
Lenses over 380 g (13.4 oz) should be supported at all times.
Do not hold the camera or carry the camera by the strap with-
out supporting the lens. Failure to observe this precaution
could damage the camera lens mount.
Lines may appear in photographs taken with non-CPU lenses
stopped down to minimum aperture.
The camera continues to adjust exposure during movie record-
ing. Select mode v or w to prevent sounds made by the lens
being picked up by the microphone.
During continuous shooting, focus is fixed at the position for
the first shot in each burst. Frame rates will slow when 5fps is
selected for Continuous.
Display Problem Solution
FEE
Lens aperture ring is not
locked at minimum aperture.
When using CPU lenses, lock
aperture ring at minimum aper-
ture (highest f-number).
F––
Non-CPU lens is attached, or
no lens is attached.
When using non-CPU lens, rotate
lens aperture ring to adjust aper-
ture.
208
n
Certain lenses will block the AF-assist illuminator and, at some
distances, the flash.
The tops and bottoms may be missing from circular bokeh
shapes created at wide apertures using lenses with a maximum
aperture of f/1.4.
❚❚ Supported Standards
DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is
a standard widely used in the digital camera industry to ensure
compatibility among different makes of camera.
DPOF: Digital Print Order Format (DPOF) is an industry-wide
standard that allows pictures to be printed from print orders
stored on the memory card.
Exif version 2.3: The camera supports Exif (Exchangeable Image
File Format for Digital Still Cameras) version 2.3, a standard in
which information stored with photographs is used for optimal
color reproduction when the images are output on Exif-com-
pliant printers.
PictBridge: A standard developed through cooperation with the
digital camera and printer industries, allowing photographs to
be output directly to a printer without first transferring them to
a computer.
HDMI: High-Definition Multimedia Interface is a standard for
multimedia interfaces used in consumer electronics and AV
devices capable of transmitting audiovisual data and control
signals to HDMI-compliant devices via a single cable connec-
tion.
209
n
A
Trademark Information
Macintosh, Mac OS, and QuickTime are registered trademarks of Apple
Inc. in the United States and/or other countries. Microsoft, Windows,
and Windows Vista are either registered trademarks, or trademarks of
Microsoft Corporation in the United States and/or other countries. The
PictBridge logo is a trademark. Google Play is a trademark of Google
Inc. The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. HDMI,
the HDMI logo and High-Definition Multimedia Interface are trade-
marks or registered trademarks of HDMI Licensing LLC.
All other trade names mentioned in this manual or the other documen-
tation provided with your Nikon product are trademarks or registered
trademarks of their respective holders.
A
FreeType License (FreeType2)
Portions of this software are copyright © 2012 The FreeType Project
(http://www.freetype.org). All rights reserved.
A
MIT License (HarfBuzz)
Portions of this software are copyright © 2012 The HarfBuzz Project
(http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights
reserved.
210
n
Battery Life
The number of shots or movie footage that can be recorded with
fully-charged batteries varies with the condition of the battery,
temperature, the interval between shots, and the length of time
menus are displayed. Sample figures for EN-EL21 (1485 mAh)
batteries are given below.
Still images: Approximately 310 shots
Movies: Approximately 65 minutes of HD footage at 1080/60i
Measured according to CIPA standards at 23 ±3 °C (73.4 ±5.4 °F)
with the camera at default settings, a fully-charged battery, a
1 NIKKOR VR 10–30mm f/3.5–5.6 lens, and a 16 GB Toshiba
SD-E016GUX UHS-I SDHC card. Value for still images obtained
under the following test conditions: photographs taken at
intervals of 30 s with the built-in flash fired with every other
shot and the camera turned off and then on after every ten
shots. Value for movies obtained under the following test con-
ditions: a series of 20 minute movies with a file size of up to
4 GB were recorded; recording was only interrupted when tem-
perature warning was displayed.
The following can reduce battery life:
Keeping the shutter-release button pressed halfway
Repeated autofocus operations
Taking NEF (RAW) photographs
Slow shutter speeds
Using a wireless mobile adapter or Eye-Fi cards
Using vibration reduction mode with VR lenses
Using zoom with power zoom lenses
To ensure that you get the most from rechargeable Nikon
EN-EL21 batteries:
Keep the battery contacts clean. Soiled contacts can reduce
battery performance.
Use batteries immediately after charging. Batteries will lose
their charge if left unused.
211
n
Symbols
C (Auto mode) ..................................23
t (Programmed auto) ........... 34, 122
u (Shutter-priority auto) ...... 35, 122
v (Aperture-priority auto) ... 36, 122
w (Manual) ................................ 37, 122
u (Best moment capture mode) 41
v (Advanced movie mode) .........49
z (Motion Snapshot mode) ..........59
h (Scene auto selector) ............. 122
c (Portrait) .........................................26
d (Landscape) ...................................26
f (Night portrait) .............................26
e (Close up) .......................................26
g (Night landscape) .......................26
Z (Auto) ..............................................26
U (flexible program) .........................34
G (menu) button ....10, 109, 119,
159
K (playback) button ..........30, 47, 62
O (delete) button ..........48, 57, 62, 87
$ (display) button ................. 5, 81
& (feature) button .. 9, 28, 52, 61, 88
J (OK) button ......................47, 56, 62
A (AE-L/AF-L) ............ 129, 155, 163
E (exposure compensation) .........68
C (continuous shooting/self-timer) .
63, 65
N (flash mode) ....................................70
L (Preset manual) ....................... 132
L (matrix) ......................................... 128
M (centerweighted) ...................... 128
N (spot) ............................................. 128
e (auto-area) ................................. 153
c (single-point) ............................ 153
9 (subject tracking) .................... 153
8 (Single frame) ...............................63
I (Continuous) .................................63
E (Self-timer) ......................................63
# (Remote control) ............................63
Y (red-eye reduction) .................... 69
p (slow sync) .................................... 69
q (rear curtain sync) ...................... 69
N (flash-ready indicator) .......... 69, 73
A
AC adapter ............................... 169, 174
Accessories ........................................169
Active D-Lighting ............................144
Adobe RGB ........................................143
Advanced movie mode .................. 49
AE lock ...................................... 129, 163
AE-L ............................................ 129, 155
AF ................................................ 149, 153
AF-A .....................................................149
AF-area mode ...................................153
AF-assist illuminator ............ 151, 156
AF-C .....................................................149
AF-F ......................................................149
AF-S ......................................................149
Aperture ........................................ 36, 37
Aperture-priority auto .................... 36
Assign AE/AF-L button ..................163
Assisted GPS ....................................... 78
Attaching the lens ............................ 17
Auto distortion control .................142
Auto image rotation ......................166
Auto mode .......................................... 23
Auto power off ...................18, 77, 162
Auto-area AF (AF-area mode) .....153
Autofocus ................................. 149, 153
Automatic scene selection ............26
Auto-select AF ..................................149
Available settings ............................181
B
Background track ................ 62, 89, 98
Battery ............................12, 14, 21, 200
Beep ................................................ 24, 65
Best moment capture mode ......... 41
Best shot ........................................44, 47
Index
212
n
Body cap ....................................1, 2, 171
Border ..................................................107
Bounce lighting .................................74
Brightness ..........................................138
Buffering ........................................45, 60
Built-in AF assist ..................... 151, 156
Built-in Flash .......................................69
Bulb ........................................................38
C
Calendar ........................................85, 89
Calendar playback ............................85
Capture illuminator .....42, 45, 61, 74
Capture NX 2 ..................124, 141, 171
CEC .......................................................101
Center-weighted (Metering) .......128
Change theme .................................117
Charging a battery ............................12
Clean image sensor ........................180
Clock ...............................19, 20, 77, 165
Clock battery .......................................20
Close up ................................................26
Color space ........................................143
Color temperature ..........................134
Command dial ......................9, 30, 152
Compatible lens ..............................169
Computer .............................................91
Continuous .................................63, 125
Continuous AF ..................................149
Contrast ....................................138, 144
Creating short movies .............. 97, 98
Crop ...........................................107, 115
Custom Picture Control .......137, 140
D
Date and time ............................19, 165
Date format ................................19, 165
Daylight saving time ...............19, 165
DCF version 2.0 ......................143, 208
Defaults ..............................................185
Delete ........................31, 48, 57, 62, 87
Delete all images ...............................87
Delete selected images ...................87
Detailed display ............................... 4, 5
Detailed photo information ......5, 82
Digital Print Order Format ...........208
Diopter adjustment control .............6
Display brightness ..........................161
D-Lighting .........................................113
DPOF ................................104, 108, 208
DPOF print order ................... 104, 108
E
Edit movie ..........................................116
Electronic viewfinder ................ 6, 161
Exif version 2.3 ....................... 143, 208
Exposure ..................68, 122, 128, 129
Exposure compensation ................ 68
Exposure indicator ........................... 38
Exposure lock ......................... 129, 163
Exposure mode ...............................122
Eye sensor ...............................................6
Eye-Fi ...................................................173
F
Face priority ...............................27, 156
File format .........................................128
Fill flash ................................................. 69
Filter effects ............................ 138, 139
Fine-tuning white balance ..........131
Firmware version ............................167
Flash ....................69, 72, 157, 158, 170
Flash compensation .......................158
Flash control .....................................157
Flash mode .......................................... 70
Flash range .......................................... 71
Flash-ready indicator ................ 69, 73
Flexible program ............................... 34
Flicker reduction .............................164
Focal length ................................. 27, 82
Focal length scale ....................27, 202
Focal plane mark ........................ 2, 152
Focus ......................................... 149, 153
Focus area ...................................24, 153
Focus lock ..........................................154
Focus mode ......................................149
213
n
Focusing the viewfinder ................... 6
Format ......................................... 15, 161
Format memory card ............. 15, 161
Frame rate .................................. 81, 125
FT1 ....................................................... 205
Full-frame playback ...................30, 81
Full-time AF ...................................... 149
G
GP-N100 ................................................76
GPS .........................................................76
Grid display ...................................6, 162
H
H.264 ................................................... 198
HD Movies .................................. 49, 126
HDMI ..........................................100, 208
HDMI device control ..................... 101
HDMI-CEC ......................................... 101
HDR ..................................................... 145
High definition .......................100, 208
High ISO noise reduction ............ 146
Histogram ............................................83
Hue ...................................................... 138
I
Image quality ................................... 123
Image review ................................... 112
Image selection .............................. 111
Image size ......................................... 123
Index print ........................................ 104
Infrared receiver ............................ 2, 66
ISO sensitivity .................................. 135
J
JPEG ..................................................... 123
L
Landscape .................................. 26, 136
Language ................................... 19, 165
Lens .................... 17, 27, 148, 169, 201
Lens cap ............................................. 203
Lens mount ....................................... 152
Live image control ............................28
Load from/save to card .................141
Long exposure NR ..........................146
M
Manual .........................................37, 122
Manual focus ....................................151
Matrix (Metering) ............................128
Maximum aperture ........................201
Memory card ...14, 16, 161, 172, 186
Memory card access lamp ............. 25
Memory card capacity ..................186
Metering .............................................128
Microphone ...............................50, 147
Mode dial ................................................7
Monitor ......................................4, 5, 161
Monitor brightness ........................161
Monochrome ....................................136
Motion Snapshot mode .................. 59
Mount adapter ....................... 169, 205
MOV .....................................................124
Movie before/after .........................127
Movie settings ..................................126
Movie sound options .....................147
Movie type ........................................... 52
Movie-record button ..32, 40, 50, 54
Movies ..........................................49, 126
Multi accessory port ................. 72, 76
Multi selector .........................................8
N
NEF ............................................. 123, 124
NEF (RAW) ................................ 123, 124
Neutral ................................................136
Night landscape ................................ 26
Night portrait .....................................26
Nikon Transfer 2 ................................. 95
Number of shots saved .................125
O
Optional flash ..................................... 72
P
Photo information ........................5, 81
214
n
PictBridge .................................102, 208
Picture Control ....................... 136, 140
Pixel mapping ..................................167
Playback ........................................30, 81
Playback menu .................................109
Playback zoom ...................................86
Portrait .........................................26, 136
Power connector ...................169, 174
Power drive zoom switch ...............27
Power switch .......................................18
Preset manual .........................130, 132
Press the shutter-release button all
the way down ............................25, 26
Press the shutter-release button
halfway .........................................24, 26
Print date ............................................108
Print DPOF print order ...................104
Printing ...............................................102
Programmed auto ....................34, 122
Protect .................................................112
Q
Quick adjust ......................................138
R
Rating ...........................................88, 112
Rear-curtain sync ..............................69
Red-eye reduction ............................69
Remote control .........................63, 163
Remote on duration .......................163
Removing the lens from the camera
203
Reset file numbering .....................164
Reset setup options .......................160
Reset shooting options .................122
Resize ...................................................114
Retractable lens barrel button ....17,
18, 202
Rotate tall ...........................................112
S
Saturation ..........................................138
Scene auto selector ........................122
SD card ...............................................172
Select by date ...................................104
Select images for printing ...........104
Self-timer ....................................63, 162
Sensitivity ..........................................135
Setup menu ......................................159
Sharpening ........................................138
Shooting menu ................................119
Short Movie Creator ........... 91, 97, 98
Shutter button AE lock .................163
Shutter speed .............................. 35, 37
Shutter-priority auto ....................... 35
Shutter-release button .... 24, 26, 42,
45, 60, 163
Silent photography ........................125
Simple photo information ............. 81
Simplified display ................................5
Single AF ............................................149
Single frame ........................................ 63
Single-point ......................................153
Size .................114, 123, 126, 195, 198
Slide show ........................................... 89
Slot empty release lock .................161
Slow motion ..............................53, 125
Slow sync ............................................. 69
Slow view ...................................... 41, 43
Smart photo selector ................ 43, 44
Speaker ....................................................2
Speedlight ........................................... 72
Spot (Metering) ...............................128
sRGB .....................................................143
Standard .............................................136
Strap ...................................................... 12
Subject tracking ..............................153
System Requirements ..................... 93
T
Television ...........................................100
Temperature warnings ....................xvi
Theme ................................................... 61
Thumbnail playback ........................ 84
Time .......................................19, 38, 165
215
n
Time stamp ....................................... 107
Time zone .......................................... 165
Time zone and date ....................... 165
Timer ......................................................63
Toning .......................................138, 139
Trimming movies ........................... 116
U
USB ........................................ 79, 95, 102
USB cable ................................... 95, 102
Use GPS to set clock .........................77
UTC .........................................................77
V
Vibration reduction ....................... 148
Viewfinder .....................................6, 161
Viewfinder brightness .................. 161
ViewNX 2 ..............................................91
Vivid .................................................... 136
Volume ...........................................56, 90
VR ......................................................... 148
W
White balance .................................. 130
Wind noise reduction ................... 147
Wireless mobile adapter ....... 79, 171
Z
Zoom guide .........................................27
Zoom ring .................................. 27, 202
No reproduction in any form of this manual, in whole or in
part (except for brief quotation in critical articles or reviews),
may be made without written authorization from NIKON
CORPORATION.
SB3B03(11)
6MVA3811-03
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikon 1 v2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikon 1 v2 in the language / languages: English as an attachment in your email.

The manual is 10,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikon 1 v2

Nikon 1 v2 User Manual - English - 104 pages

Nikon 1 v2 User Manual - German - 104 pages

Nikon 1 v2 User Manual - German - 236 pages

Nikon 1 v2 User Manual - Dutch - 104 pages

Nikon 1 v2 User Manual - Dutch - 236 pages

Nikon 1 v2 User Manual - French - 104 pages

Nikon 1 v2 User Manual - French - 236 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info