619243

Niko 550-20100 Manual

41
Zoom out
Zoom in
Previous page
1/66
Next page
84
12. Touchscreen
Use a drill (with a 6 mm diameter) to drill a hole of 40 mm for each plug. If you are drilling in timber, you will not need to
use the plugs, and only a drill hole of 20 mm with a 3 mm diameter will be required.
Follow the steps below to mount the touchscreen:
1 Screw the assembly plate onto the wall using the four screws and plugs supplied.
2 Connect the green screw terminal supplied to the 24V power supply cable while observing the polarity as indicated
on the back of the touchscreen.
3 Crimp an RJ45 plug onto the twisted pair cable (UTP, STP or FTP). Observe the standard colour coding for RJ45.
• Mount the assembly plate in a central position on top of the flush-mounting box.
• Make sure the assembly plate is level.
• The unevenness of walls cannot exceed 2 mm.
• If you are using PoE, you do not need a separate 24V power supply cable.
• Only use the Niko PoE supply of type IEEE802.3af. This power supply provides voltage via the free pairs.
• The green screw terminal supplied (24V power supply) is suitable for a maximum copper diameter of
maximum 1.5 mm².
Min.
1,50m
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niko 550-20100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niko 550-20100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 6,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info