Manual Niko 390-20150 (page 14 of 24) (English, German, Dutch, French)

619046

Zoom out

Zoom in

1/24

350-20050, 350-20150 / 390-20050, 390-20150

3. OPERATION AND SETTINGS

3.1. Operation

3.1.1. General

The outdoor motion detector is ready to use three to five minutes after connecting to the mains voltage (warm-up time). The

connected lighting will be switched off as soon as the device is ready to use.

3.1.2. Automatic ON

The integrated light sensor continuously measures the light level in the detection zone and compares this level with the

preset value specified using the LUX key. The light sensor automatically switches the lighting on only when the detector

detects motion within the detection range and when the daylight level drops below the preset lux value. The lighting remains

on as long as motion is detected.

3.1.3. Automatic OFF

The lighting automatically switches off when the preset daylight level is reached.

The integrated timer is used to set the switch-off delay as desired. The lighting will remain on for the specified delay time

after the last motion is detected. Once the switch-off delay has expired, the lighting will switch off.

3.1.4. Manual ON

The lighting can also be manually switched on by pressing the 230 Vac NC push button.

Press and hold the push button for more than four seconds to switch the lighting on, regardless of the measured daylight

level. The lighting will remain on for the specified delay time after the last motion is detected. Once the switch-off delay has

expired, the lighting will switch off.

3.2. Settings

At delivery, the light sensitivity, switch-off delay and detection range are set as follows (factory settings):

light sensitivity ± 70 lux

switch-off delay ± 7 min

detection range Anthracite: 11 m

White: 14 m

These values can be adjusted using the potentiometers under the cover as follows (fig. 9):

light sensitivity

5 lux

to inﬁnite (regardless of daylight level)

switch-off delay 8 s to 30 min

detection range 0 to 14 m

To adjust the settings for the light sensitivity, switch-off delay and detection range, open the cover and turn the

potentiometers to the desired position using a screwdriver.

The sensor can be rotated horizontally up to 25° to adjust the direction of the detection (fig. 10).

If a section of the detection area is to be excluded from detecting any motion, cover the sensor lens using the cover cap

supplied. You can cut the cover cap to size according to the desired range. Figure 11 shows the range corresponding to a

cap customised for a range set to 14 m. Follow the instructions in figure 12 to slide the cap into the slot.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niko 390-20150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niko 390-20150 Manual

Product: