619044

Niko 350-20150 Manual

13
Zoom out
Zoom in
Previous page
1/24
Next page
13
350-20050, 350-20150 / 390-20050, 390-20150
Read the complete user manual before carrying out the installation and activating the system
1. DESCRIPTION
The motion detector uses Passive Infrared Technology (PIR) and is suitable for outdoor use. Lighting control through
motion detection is useful for driveways, gardens, houses, holiday homes, car parks and public places.
Attach the outdoor motion detector to a ceiling using the mounting brace (not included). Both the outdoor motion detector and
the mounting brace are available in two versions: White (350-20050 and 390-20050) and Anthracite (350-20150 and
390-20150).
2. INSTALLATION
2.1. Positioning
The outdoor motion detector reacts to motion and heat in its environment. It is most sensitive to diagonal movement
(walking direction) with respect to the detection beams (fig. 1).
Installation tips:
- The recommended mounting height is 2 to 3 m. At a height of 2.5 m, the White outdoor motion detector has a
maximum detection range of 14 m at a detection angle of 180°.
Note: The maximum detection range of the Anthracite outdoor motion detector is 11 m.
- Do not install the outdoor motion detector near moving objects (such as tree branches and leaves), heat sources or air
currents. This can result in undesired activation of the outdoor motion detector.
- Do not position the outdoor motion detector towards the light source it is meant to activate.
Attention: Disconnect all power before installing the outdoor motion detector. Do not connect the device to the mains
voltage until installation is completed.
2.2. Mounting
Opening the outdoor motion detector
- Insert a screwdriver into the openings in the cover to open the locks (fig. 2).
- Click the cover off.
Wiring connections for wall mounting the outdoor motion detector
- Guide the cable through the holes on the back of the outdoor motion detector (fig. 6) and connect the sensor (fig. 3.1).
Connect a push button if manual operation of the outdoor motion detector is also desired (fig. 3.2).
- Mount the outdoor motion detector against the wall using the accompanying screws (fig. 4).
- Click the cover back onto the outdoor motion detector.
Wiring connections for ceiling mounting the outdoor motion detector
Note: To attach the outdoor motion detector to a ceiling, a mounting brace is required. This is available separately.
- Click the mounting brace onto the outdoor motion detector (fig. 5).
- Guide the cable through the holes on the back of the outdoor motion detector via the mounting brace (fig. 6) and
connect the sensor (fig. 3.1).
Connect a push button if manual operation of the outdoor motion detector is also desired (fig. 3.2).
- Click the cover back onto the outdoor motion detector (fig. 7).
- Attach the outdoor motion detector to the ceiling with the accompanying screws (fig. 8).
EN
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niko 350-20150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niko 350-20150 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info