619037
32
Zoom out
Zoom in
Previous page
1/40
Next page
32 EN
10-570
A list of other possible problems with their causes and solutions is given below.
Problem Cause Remedy
You hear a negative tone
when pressing .
Programming error. Erase the programming and programme again.
System is still in programming mode. Exit programming mode.
You press , but
nothing happens.
Video internal unit is not connected correctly. Check the wiring.
Two functions assigned to the button.
If a call is in progress, the relay switches to open the door.
If no call is in progress, the light relay switches.
The image on the video
internal unit is not clear.
Conductors V1 and V2 have been reversed. Reverse conductors V1 and V2.
Cable is unsuitable:
• cable distance is too great;
• cable is eroded;
• cable cross-section too small;
• cable is not a twisted pair cable.
Replace the current cable with a suitable cable.
The gain on the splitters is not set correctly. Adjust the gain on the splitters with the potentiometers.
No image on the video
internal unit. The other
functions work OK.
Wiring is not connected correctly:
• M or P missing;
• V1 or V2 not connected.
Check the wiring (see wiring diagram).
The terminal resistor is not correctly configured. Set the terminal resistor correctly
6. TECHNICAL DATA
Mains supply .......................................24V DC ± 8%
Material ...............................................ABS+PC
Dimensions .........................................186 x 95 x 19mm
Weight ................................................230g
Permissible ambient temperature ..........0° to 40°C
Maximum input current ........................200mA at terminal P
Input current when OFF ........................0.4mA at terminal a; 33mA at terminal P
Colour .................................................White
Screen ................................................TFT colour screen (320 x 234 pixels, RGB)
85mm (3,5”) screen diagonal
Video signal .........................................1 Vpp, symmetric
Languages ..........................................English (standard) / Dutch / German / French / Slovak
7. WARNINGS REGARDING INSTALLATION
- The installation should be carried out by a registered installer and in compliance with the statutory regulations.
- This user manual should be presented to the user. It should be included in the electrical installation file, and it should be passed on to any new owners.
Additional copies are available on the Niko website or via the Niko support service.
- During installation, the following should be taken into account (non-exhaustive list):
- the statutory laws, standards and regulations.
- the technology currently available at the time of installation.
- this user manual, which only states general regulations and should therefore be read within the scope of each specific installation.
- the rules of proper workmanship.
8. NIKO SUPPORT
In case of doubt or for the specific exchange procedure in case of a possible defect, contact the Niko support service in Belgium at +32 3 778 90 80 or
your wholesaler/installer. Contact details and more information can be found at www.niko.eu under the “Help and advice” section.
9. GUARANTEE PROVISIONS
- The period of guarantee is four years from the date of delivery. The delivery date is the invoice date of purchase of the product by the consumer. If there
is no invoice, the date of production applies.
- The consumer is obliged to inform Niko in writing about the non-conformity, within two months after stating the defect.
- In case of a non-conformity, the consumer only has the right to a product repair or replacement free of charge, which shall be decided by Niko.
- Niko shall not be held liable for a defect or damage resulting from incorrect installation, improper or careless use, incorrect operation, transformation of
the product, maintenance that does not adhere to the maintenance instructions or an external cause, such as damage due to moisture or overvoltage.
- The compulsory regulations of the national legislation concerning the sale of consumer goods and the protection of the consumer in the countries where
Niko sells, directly or via sister companies, subsidiaries, chain stores, distributors, agents or permanent sales representatives, take priority over the
above-mentioned rules and regulations.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niko 10-570 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niko 10-570 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 5,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niko 10-570

Niko 10-570 User Manual - English, German, Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info