8488
3
Zoom out
Zoom in
Previous page
1/5
Next page
Note: When HOLD is on, in order to save power, press / , the player will be powered off after it displays
the model number and .
VIII.CONNECTING TO A COMPUTER
1. Installation of driving program
Note:
A. Windows 98 base needs installation of driving program, while Windows 2000/ XP/ ME do not.
B. Disconnect the MP3 player to the computer before installation is completed.
C. Windows 2000 Service Pack 3.0 (in the installation CD) must be installed under Windows 2000.
a. Load the provided installation CD in to the driver compartment.
b. Double clicks on SETUP.EXE, pictures will be shown as follows:
Then clicks to Next->Yes->Next->Next->Finish according to the reminder.
Installation is finished.
2. Connecting to a computer
Connect your MP3 player to PC via USB cable, One click on
/ or under condition that MP3 player has been on
status, the window will appear indicating that new hardware has been found, then the system will automatically install
the drive program. After it, a mobile disk icon (see following) will be found in "My computer" with "PC----" on LCD
display.
3. Upload/ Download files
So long as the driving program has been properly installed, the MP3 player itself is a mobile disk after being connected
to a computer. Therefore the file transfer is operated in the same way as the ordinary disk.
Note: a. Don't unplug the MP3 player during the process of uploading or downloading files; otherwise, it may
cause dysfunction of the unit due to the damage to the software.For details, please see Trouble shooting.
b.When you want to unplug the MP3 player from the USB port of the computer, be noted to "PC-- --" on LCD.
If LCD is blinking with "USb-SA" or "Usb-rd", it indicates that data is being transferred. Unplug the MP3 player
when it displays "PC-- --".
Special notice: Normal uninstallation for USB device is required under Windows 2000 or Windows XP; otherwise
it may cause damage or data loss to the player.
Operating steps are as follow:
a.Double clicks on icon of "Unplug or Eject Hardware" on bottom right corner of the computer (note: under XP, it is
"delete hardware safely") as following:
7 8
9 10
b.Click Stop on the pop-up window. Refer to the following picture on the left.
c.Click OK on the pop-up window. Refer to the following picture on the right.
d.Click OK on the pop-up window. See the following window. You may then unplug the MP3 player from USB port
after the above steps.
4. Upgrade/ Renew Software
Better not upgrade the software unless the player works abnormally, i.e. not able to be powered
on.
A.Connect MP3 with computer.
B.Press
/ , or MP3 has already been in ON status, then a mobile disk icon will appear in "My Computer" , see
picture a:
C. Steps: Start>Program>SigmaTelMSCN Audio Player>SigmaTel MSCN Firemware Download, see the following
picture b.
a b
Then a window will pop out as picture c:
After the above windows close automatically, the window of upgrading software will pop out as picture d:
c d
Note: if you want to farmat data area of the flash while upgrading, you need to choose Format Data Area.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nikkei NMP-320 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nikkei NMP-320 in the language / languages: English as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nikkei NMP-320

Nikkei NMP-320 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info