8
Power
Plug the attached AC cord into a standard AC power outlet to power the DVD player.
Connecting video and Audio
Note: Before making or changing any connections, make sure that all the devices are disconnected from the
power outlet.
Note: Both video and audio connections must be made from the DVD Player to your television.
RCA Stereo Audio Output
1. Use the RCA Stereo Audio Output to send audio from the DVD player to a television.
2.Required an RCA audio cable (included).
3.Use the RCA audio cable to connect the RCA Stereo Audio Output to an RCA stereo audio input on a television.
4.Adjust the connected televisions input setting to match the input used in the previous step.
Coaxial Digital Audio Output
1.Use the Coaxial Digital Audio Output to send high quality audio from the DVD player to an audio system.
2.Requires an RCA audio cable (included).
3.Use the RCA audio cable to connect the Coaxial Digital Audio Output to a coaxial digital input on an audio
system.
4.Adjust the connected audio system’s input setting to match the input used in the previous step.
5.In the Digital Out portion of the setup menu, adjust to PCM, RAW or off.
Composite Video Output
1.Use the Composite Video Output to send video from the DVD player to a television.
2.Requires an RCA video cable (included).
3.Use the RCA video c
able to connect the Composite Video Output to a composite video input on a television.
4.Adjust the connected televisions input setting to match the input used in the previous step.
HDMI Output (Best)
Requires a HDMI cable (not Included)
1.Use a HDMI cable to connect the HDMI Output to a HDMI input on a television.
2.Adjust the connected televisions input setting to match the input used in the previous step.
3.Press the HDMI button on the remote to adjust the display resolution between 480p, 720p, 1080i and 1080p.
DVD,CD
Loading a Disc
1.Press the Open/Close button to open the Disc Drawer.
2.Load a disc into the DVD player, label side facing up.
3.Press the Open/Close button to close the Disc Drawer.
4.After a disc is loaded, it will begin playing automatically.
Playing a Loaded Disc
1.Follow the instructions for Loading a Disc.
2.If the disc does not begin playing automatically, press Play/Pause button.
Playing a JPEG Cd
Load a JPEG photo disc into the player by following the instructions for Loading a Disc. A slide show of JPEG
photos from the CD will begin playing automatically.
Press the Stop button to access a file view of the loaded JPEG disc.
Use the Arrows/enter buttons on the remote to select and view the photos.
USB Port
1.Connect a USB Thumb Drive to the USB Port.
2.Formats Supported are .AVI, MP4 Files and .Jpeg
Files.
3.Press and Hold the DVD/USB Button to enter the DVD/USB mode
4.Use the Arrows/enter buttons on the remote to select and view the photos.
