776299
41
Zoom out
Zoom in
Previous page
1/99
Next page
SECTION III OPERATION MANUAL
Utrecht
- 40 - Ref 002
4.6. Fast logging recorder
trigg Selected triggers for initiating of the selected
logging.
Selected timer trigger also displays the time to start
logging
signals Selected signals for logging.
tot. rec. buf Length of store buffer for logging after trigger.
lev. trg.
cond Selected trigger input, level and slope.
It is visible only when level triggering is enabled.
Symbol ‘>’ shows rising slope and ‘<’ falling slope.
store mode Selected storing mode.
In repeat mode the instrument displays the number
of repeat shots still available
I
1FAST LOGGING
19 . 8 A
rec. no: 1
0 . 0 A T = LEVEL
Note:
Last detected event is
displayed
4.7. Transients recorder
trigg Selected triggers for initiating of the selected
logging.
signals Selected signals for logging.
tot. rec. buf Length of store buffer for logging after trigger.
lev. trg.
cond Selected trigger input and level.
It is visible only when level triggering is enabled.
trg. dL/scan Minimum slope to trigger.
It is visible only when level triggering is enabled.
store mode Selected storing mode.
In repeat mode the instrument displays the
number of repeat shots still available
U1TRANSIENTS
325 . 2 V
rec. no: 1
T = LEVEL
318 . 2 V
Note:
Last detected event is
displayed
4.8. EN 50160 recorder
start If the instrument is in Rec.Wait mode and the memory is empty, the
programmed START date & time is displayed.
If instrument is in Rec.Run mode, the actual recording start date & time (as
opposed to the programmed one) is displayed.
stop If the instrument is in Rec.Wait or Rec.Run mode, the programmed STOP
date & time is displayed.
If the instrument is in Rec.Stop or Rec.Complete mode, the actual recording
stop date & time (as opposed to the programmed one) is displayed.
Under certain circumstances, the instrument also displays the reason for
stopping the recording:
MANUAL BREAK
Manual stop in AUTO stop mode
END OF MEM. Memory full (in linear memory mode)
flick Flicker Analysis enabled (ON) or disabled (OFF).
anom The number of detected and saved Voltage Anomalies.
If currently in a Voltage Anomaly, a flashing arrow points to the number.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nieaf-Smitt PQA 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nieaf-Smitt PQA 6600 in the language / languages: English as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info