776299
22
Zoom out
Zoom in
Previous page
1/99
Next page
SECTION III OPERATION MANUAL
Utrecht
- 21 - Ref 002
2. OFF
Selecting OFF turns the instrument OFF after 2 seconds. All current settings and set
parameters are saved during this period in non-volatile memory. If switching OFF occurs
while the instrument is set for recording, this is treated as a POWER BREAK and the date
& time of Power OFF is saved. This will also occur if the instrument loses its power supply
while recording (see section II.3.5 Power Break Recording).
3. CONFIGURATION
Configuration menu can be selected by turning the rotary switch to CONFIG. position or
pressing ESC / CONFIG key.
Use this menu to set all parameters for Recording and Real time measurement.
From this main screen, various configuration sub-menus can be accessed, allowing
instrument parameters, measurement conditions and settings to be changed.
Instrument details, model number, software version & serial number and battery status,
are displayed only when the rotary switch is in the CONFIG position.
The legend “EXTR” is shown when the instrument is powered from the mains supply and
a “BATT” legend with its bar graph indicates that the instrument is powered by battery and
the charge state of the battery.
Fig. 8: Main Configuration menu
The main CONFIG menu consists of five items. Use the UP and DOWN keys to highlight
the appropriate item, then press the ENTER key to select it.
The HOLD key is ignored in this menu.
Note: Warning ‘CONFIG.ERROR’ is activated in case of confirmed incorrect
parameter selection.
ESC – clears warning and close accessed menu without any changes.
Enter - clears warning and resets accessed menu to the last stored state.
3.1. SYSTEM sub-menu
This sub-menu allows setting of the password, the serial port baud rate, instrument date &
time and language. From this menu the user can reinitialize the instrument to factory
settings, or clear the memory.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nieaf-Smitt PQA 6600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nieaf-Smitt PQA 6600 in the language / languages: English as an attachment in your email.

The manual is 1.72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info