Manual Niagara GoStream Broadcast Receiver Decoder (page 55 of 80) (English)

641177

Zoom out

Zoom in

1/80

IP Outputs Tab

The BRD is capable of doing ASI to IP turnaround, if it equipped with the optional IP Output

license (see the Admin License Keys Tab). The output streams can be sent using UDP or RTP,

and, if the unit has the SMPTE 2022 FEC license, it can also transmit a FEC stream.

The IP Output function is independent of the decoder source selection and is always available.

For example, the decoder may be displaying a stream received from Ethernet, and at the same

time transmitting an ASI stream over IP.

The IP Output function of the BRD has the following capabilities:

 Protocol support: UDP, RTP and SMPTE-2022 FEC (if licensed)

 Full transport transmission

 MPTS splitting into multiple SPTS streams

 NULL-padding of SPTS streams

 Support for up to 16 IP flows

 Transmission always uses the streaming Ethernet port

IP Outputs Configuration Tab

The IP Outputs configuration tab is depicted below. It contains 16 pre-defined IP output streams,

managed as follows:

 Stream 1 is always the full transport stream received from the ASI input.

 Streams 2 to 16 are SPTS streams, automatically pre-populated with the programs present

in the ASI input, in the order they appear in the PAT.

The most common settings and statistics for each stream are shown in the table below. Note that

changes in the table take effect immediately. The columns are:

 Program: This column shows the program number for the specific stream. The possible

values are:

o All: this will only be shown for Stream 1, to indicate that it is the full transport.

o 1 to 65535: these are program numbers, read from the PMT.

o None: this will be displayed for streams for which there are no available

programs. These streams can be configured, but will only actually transmit if the

transport changes and more programs appear.

 Enable: Checking this box enables transmission of a particular stream. This operation

will fail if the BRD does not have an IP Output license.

 Destination Address: Enter the desired destination IP address for the stream. Both

multicast and unicast are supported.

 UDP Port: Enter the desired UDP port for the stream.

 RTP: If this box is checked, the RTP protocol is used. If not checked, the UDP protocol

is used. Note that RTP requires that the UDP port be an even number. Checking this box

will change the UDP port to the next even number if it is an odd number.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niagara GoStream Broadcast Receiver Decoder in the language / languages: English as an attachment in your email.

The manual is 2,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara GoStream Broadcast Receiver Decoder

Niagara GoStream Broadcast Receiver Decoder Quick start guide - English - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niagara GoStream Broadcast Receiver Decoder Manual

Product: