641176
97
Zoom out
Zoom in
Previous page
1/120
Next page
97
Admin General Tab
The Admin General Tab includes the following parameters:
Card Name: This field defaults to the model name (B264, B264 or ITV-B264d) but
can be set to any descriptive name. The name provided here will also appear in the
Dashboard™ Tree View.
SNMP Traps: This allows SNMP traps to be enabled or disabled
. Note that this
setting does not take effect immediately it will become active the next time the card is
rebooted.
MIB File Download: The B264 provides an up-to-date copy of its MIBs. If you click
on the Save button, a zip file with the relevant MIBs will be downloaded to your
computer. This zip file contains the card MIBs, as well as the Ross Video and
openGear® MIBs required to compile the card MIBs.
The Admin General Tab is depicted below:
Admin Firmware Tab
The B264 can hold up to three distinct firmware images: a Factory image, and two upgrade
images, called Image 1 and Image 2. The Factory image can never be overwritten, and will
always be available as a fall-back in case of problems or failed updates. Image 1 and Image 2
can be updated at will. Since the card offers two upgrade images, it is always possible to fall
back to the previous image if there are any problems with the current one. The card will also
automatically fall back to the factory image if it detects a corrupted firmware image. Finally, the
push buttons on the front of the card allow for a forced override to the factory image, as
described in the Front Switches section.
B264 firmware is updated in the same fashion as with any standard openGear® card. Once you
obtained the upgrade image from Niagara Video, place it anywhere in your computer and click
on the Upload button, as shown below. A dialog box allows you to select the upgrade file. Note
that you can simultaneously upgrade all of your B264 cards over multiple chassis if you wish.
For more detail, consult the Dashboard User Manual, chapter 6, section Upgrading Device
Software. The Dashboard manual can be downloaded from:
SNMP is an optional feature in the openGear™ frame controller. The MVN-EN460 SNMP functions are only
available if SNMP is licensed in the frame controller. SNMP is always enabled in the ITV-EN460c.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara B264 Standalone Encoder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info