Manual Niagara B264 Standalone Encoder (page 94 of 120) (English)

641176

Zoom out

Zoom in

1/120

MPTS Configuration Parameters

Whenever possible, the MPTS uses the same parameters as configured in the individual encoders.

However, there are two parameters that need to be independently set, as follows:

 MPTS Transport Stream ID: This field sets the Transport Stream ID for the MPTS

formed by multiplexing the two encoders. This field accepts both hexadecimal (starting

with 0x) and decimal entries. Valid values are from 0 (0x0) to 65535 (0xFFFF).

 MPTS Original Network ID: This field set the Original Network ID to be reported in

the MPTS SDT (if enabled). For a discussion of how to set the Original Network ID,

please see the SDT description in Advanced Tab – Mux Parameters in the Encoder

chapter.

Note that this window does not have an Apply button; changes take effect immediately and on-

the-fly.

MPTS PID/Program Allocation

Since the PIDs and Program Numbers can be set arbitrarily in each encoder, it is possible to

select the same values for one or more of these parameters between Encoder 1 and Encoder 2.

However, when the bitstream from the encoders is multiplexed into one MPTS, these values

have to be distinct.

When building the MPTS, the B264 will use the configured values for each encoder if at all

possible. However, if there are any conflicts, the following rules are employed:

1. The PID/Program allocations made for Encoder 1 are used unchanged in the MPTS.

2. If any PIDs configured for Encoder 2 conflict with those from Encoder 1, the Encoder 2

PIDs are remapped to the closest free value. Note that this remapping only happens for

the MPTS; ports carrying the bitstream for Encoder 2 only will use the configured values.

3. If the program number is the same for Encoder 1 and Encoder 2, the program number for

Encoder 2 in the MPTS will be that of Encoder 1 plus 1. For example, if both encoders

are configured to be program 4, Encoder 1 will be program 4 in the MPTS, and Encoder

2 will be program 5 in the MPTS. Both encoders will still be program 4 in their

individual SPTS.

4. The MPTS will have an SDT if either Encoder 1 and/or Encoder 2 have the SDT enabled.

If only one encoder has the SDT enabled, the MPTS SDT will have only one entry, for

that encoder.

The MPTS PID/Program Allocation area reports the actual PIDs and Program Numbers being

used in the MPTS. It also reports whether or not the individual SDTs are enabled per encoder.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niagara B264 Standalone Encoder Manual

Product: