Manual Niagara B264 Standalone Encoder (page 90 of 120) (English)

641176

Zoom out

Zoom in

1/120

To make the connections, simply check the Connect box in front of the input you wish to use.

You can connect any source to as many outputs as you wish. Conversely, unchecking the box

disconnects that particular source-destination pair. Two examples are shown below:

Source Selection in the Output Ports

When configuring an output (ASI or IP), connections can be immediately made as well, in that

output’s configuration interface (see ASI Ports: Configuration Tab and IP Outputs:

Configuration Tab). The selection parameters are depicted below. The user-defined names for

the Encoders (and Test Packet Generators) are displayed in the user interface to facilitate

identification. To make the connection, just click on the corresponding checkbox under Connect.

Note that if an encoder channel is not available (either because it is not installed, or because it

has been configured for HTTP Live Streaming), it will not show in the list.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niagara B264 Standalone Encoder Manual

Product: