Manual Niagara B264 Standalone Encoder (page 84 of 120) (English)

641176

Zoom out

Zoom in

1/120

 If you select Row and Column, and the number of columns is less than 4, it will be

automatically adjusted to 4.

 If your number of rows is 10, and you set the number of columns to 20, the number of

rows will be automatically reduced to 5.

The number of rows and columns should be selected based on some understanding of the packet

loss characteristics of the network between the B264 and the receivers. If you have no statistics

on packet loss, the recommended setting is 20 columns and 5 rows to maximize the correction

capabilities. Most receivers that support SMPTE 2022 FEC provide packet loss/recovery

statistics. After running for a while, if the network is found to be clean, consider reducing the

matrix to 10 rows and 10 columns, which will reduce the overhead.

Completing the Configuration

Once the configuration information is filled in, click on the Apply button to make it active. If

there are no errors, the stream will be created, and the configuration area disappears. If any

errors are detected, they will be displayed at the top of the Apply button.

The following configuration-related errors are flagged:

 Error: UDP Port/Address conflict with Port X/Y: you have configured two IP Output

streams with the same destination IP Address and UDP port, on the same Ethernet

interface. Please review your settings. Note that ports with FEC enabled will use either

two or three UDP ports (depending on the FEC settings) – these are checked as well.

 Maximum number of streams exceeded on this port: you will receive this message if

you attempt to create more than 4 IP outputs on a given Ethernet port.

 Error: No SMPTE 2022 FEC License Available: the SMPTE 2022 function requires

licensing. Please contact Niagara Video to obtain a license.

If the configuration is successful, the output stream will be added to the Active IP Outputs table.

Active IP Outputs Table

Once the output is created, it is added to the Active IP Outputs table, which has Basic and

Advanced views. This table provides a summary of the configuration and status of the output

stream. An example of this table, in the Basic view, is depicted below

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niagara B264 Standalone Encoder Manual

Product: