Manual Niagara B264 Standalone Encoder (page 38 of 120) (English)

641176

Zoom out

Zoom in

1/120

 Group, Channels: SDI embedded audio is typically divided into four groups (denoted by

Group 1 to Group 4); each group has four mono channels (2 stereo pairs), denoted by

Channels 1-2 and 3-4. These controls allow the selection of the desired group and

channel pair. In the large majority of the cases, the first stereo pair is in Group 1,

Channels 1-2, the second stereo pair is in Group 1, Channels 3-4, and so on. The Group

selection has one additional choice, labeled Custom DID. This allows the encoder to use

a non-standard embedded audio DID (this quite uncommon). If Custom DID is selected,

a new configuration option becomes available, where the DID value can be entered:

 Group DID: Enter the desired Group DID, in hexadecimal. Note that the entry will be

immediately validated and rejected if invalid. As a reference, the table below contains

the standard DIDs built into the system for Groups 1 to 4.

 Language Code: This parameter represents the 3-letter ISO 639-2 language code for the

audio, to be placed in the audio language descriptor in the PMT. For a complete list of

the language codes, see this URL:

http://www.loc.gov/standards/iso639-2/php/code_list.php

If the Output Protocol in the Encoder Connections Tab is set to RTMP, this field will not

be displayed as RTMP does not use the transport stream container.

 Audio Encoding: This parameter selects the audio encoding algorithm. The available

choices depend on the Audio Source selection. For Analog Audio, the choices are

MPEG-1 Layer II and AAC-LC. For SDI Embedded Audio, the Dolby Passthrough

Group

SD-SDI DID

HD-SDI DID

Group 1

0x2FF

0x2E7

Group 2

0x1FD

0x1E6

Group 3

0x1FB

0x1E5

Group 4

0x2F9

0x2E4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niagara B264 Standalone Encoder Manual

Product: