641176

Niagara B264 Standalone Encoder Manual

33
Zoom out
Zoom in
Previous page
1/120
Next page
33
Basic Tab – General Configuration
Name: All B264 encoders and outputs can be assigned a user-defined name. This name
is used to identify the encoder later when making connections. Use any descriptive name
suitable for your application, or accept the default.
Encoder State: This control allows you to start/stop an encoder. This control needs to be
set to Running for normal operation.
Input Connection: This control selects which of the two rear I/O panel inputs is to be
connected to this encoder. The B264 can run both encoders from the same input. The
default is to run Encoder 1 from Video/Audio 1 and Encoder 2 from Video/Audio 2, but
all combinations are allowed. Note that the parameters presented in the Video
Configuration section may change if this selection changes (for example, if you switch
the encoder from a Composite input to an SDI input).
Basic Tab – Video Configuration
The B264 is capable of automatically identifying the video signal present in the selected input
connection. The detected signal is reported in the Encoder Statistics Tab. Additionally, the
encoder can also be set to auto-configure its input based on the detected signal:
Video Input Settings: This parameter selects whether or not the encoder will auto-
configure based on the detected video input signal.
o Manual Selection: The input signal must be correctly selected using the Input
Resolution, Input Source, and Field/Frame Rate controls for the encoder to run.
If the input signal does not match the settings, the encoder will not run.
o Auto Detected: The encoder will auto-detect the input signal, and automatically
configure for it if it is a supported signal. The Input Resolution, Input Source,
and Field/Frame Rate controls are not displayed.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara B264 Standalone Encoder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info