Manual Niagara B264 Standalone Encoder (page 11 of 120) (English)

641176

Zoom out

Zoom in

1/120

Product Overview

The B264 supports up to two H.264 SD/HD encoders, with up to four stereo pairs of audio

encoding. One stereo pair is dedicated to each video encoder, and the remaining two stereo pairs

can be individually associated with either channel. The encoded transport stream can be routed

and replicated to Ethernet and ASI outputs. Both SPTS and MPTS outputs are supported.

The following inputs are available:

 Software-configurable Composite or SDI video inputs, with auto-detection capability

 SDI video inputs support SD-SDI, HD-SDI and 3G-SDI, with auto-detection capability

 Analog unbalanced audio stereo inputs

 SDI embedded audio support

 Two internal test packet generators (which can be used to generate ASI or IP test

streams)

The following outputs are available:

 Two ASI outputs

 Two Ethernet outputs, supporting full-duplex 100 Mb/s and 1 Gb/s operation

Each of the encoder channels in the B264 can operate in one of two modes:

 ASI/IP Streaming: used in traditional broadcast applications. The encoded bitstream be

transmitted over ASI or IP using UDP/RTP protocols, with replication capability.

 OTT Protocols: used for Internet streaming. These include RTMP, HLS and Direct

HTTP. For the modular B264, the control port can be used for stream output in these

modes.

ASI/IP Streaming

For ASI/IP streaming, configuring the B264 includes the following steps:

Step 1: Configure the encoders.

Step 2: Configure the outputs (ASI or IP).

Step 3: Make connections between inputs and outputs (for UDP and RTP).

The connections between inputs and outputs can be made as part of the input or output

configuration steps. The B264 supports many-to-many connections.

The overall architecture is depicted below.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 Standalone Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 Standalone Encoder

Niagara B264 Standalone Encoder Quick start guide - English - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Niagara B264 Standalone Encoder Manual

Product: