641175

Niagara B264 openGear Encoder Manual

104
Zoom out
Zoom in
Previous page
1/120
Next page
104
Continuity Counter field. On request, Niagara Video can supply a test program
for Windows or Linux that receives the Ramp48 packets and checks them.
o PCR Packets: TPG is generating packets with a valid PCR field (stamped
corresponding to the packet’s departure time at the configured bit rate). The
packets have a small payload with random data, so the Continuity Counter field is
valid and counting.
PID: controls the PID of the generated packets. This field accepts both decimal and
hexadecimal values (prefixed with 0x).
Bit Rate (bps): controls the bit rate of the generated packets. The minimum value is
64,000 bps and the maximum value is 213,000,000 bps.
Admin License Keys Tab
The B264 has a number of optional licensable features. The Admin License Keys Tab is used to
manage these features. Using this tab, you can see how many licenses you have for each
optional feature, and how many you are currently using.
The B264 has the concept of a temporary license. If you want to try out a certain feature, contact
Niagara Video. You will receive, free of charge, a license key that enables that feature for a
specific period of running time (license time does not “count” when the card is off).
The Admin License Keys Tab includes a License Status table, and a configuration area, as shown
below. The table rows are license counts, and the columns correspond to different licensable
features. The rows are:
Permanent Licenses: This is the number of non-expiring licenses for each feature.
Temporary Licenses: This is the number of temporary licenses for each feature. Once
the license period expires, they are removed.
Total Licenses: This is the total number of licenses for each feature. It is simply the sum
of the permanent and temporary licenses.
Used Licenses: This is the number of licenses in use for each feature by the current card
configuration.
If you have temporary licenses, the Time Remaining field indicates how long until they expire.
If you do not have temporary licenses, this field has the message “No active temporary licenses”.
The table columns correspond to the licensable features, as follows:
AAC-LC Pairs: The B264 requires one license per instance of AAC-LC stereo encoding.
Note that AAC-LC is required for the operation of some OTT protocols.
Extra MP2 Pairs: One MPEG-1 Layer II license is included with each encoder channel.
This field counts the additional licenses.
SD Instances, HD/1080i Instances, HD/1080p Instances: The maximum output
resolution for the B264 is subject to licensing. Note that if the encoder has a license for a
particular resolution, that license is good for any lower resolution as well.
… 104 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara B264 openGear Encoder at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara B264 openGear Encoder in the language / languages: English as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara B264 openGear Encoder

Niagara B264 openGear Encoder Quick start guide - English - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info