641187
132
Zoom out
Zoom in
Previous page
1/150
Next page
Appendix A: H.264 Advanced Settings
126 ViewCast
Setting
Explanation
compensation for any errors that arise in the motion
estimation while encoding the video. The actual value of
256 corresponds to a value of 1.0 and is set to maximum
as the default.
MotionEstimationSubPixelComparison
Setting this value causes the encoder to select the sub-
pixel motion estimation comparison. 0 is the default for
MPEG4 Simple Profile encoding because only Advanced
Simple Profile allows for sub-pixel motion estimation.
You can use higher values but they can increase CPU and
memory usage, sometimes with minimal significant gain
in quality.
Note: The correct range is 0 to 14, but a value of 256
that affects the color portion of the video only is
available. Only use this value when you completely
understand the encoding needs. All other values are
ignored.
MpegQuant
Setting the value of this to 0 will use quantizers for
Simple Profile MPEG4 encoding while using 1 will use
quantizers for Advanced Simple Profile and for high bit
rate encoding more detail from the original video will be
preserved. For lower bit rate encoding, using 0 smooths
out the video appearance.
QuantizerMax
This value sets the maximum for the quantizer in use.
The range is 1 to 51 with 51 being the highest and least
complex quantizer available. The value 31 is a good
default. However lowering this value increases the CPU
load, in some cases considerably. Values above 31 are
available, but could significantly affect video quality
negatively.
QuantizerMin
This value sets the minimum quantizer used in the
encoder. The lower the quantizer, the closer the
encoded video is to the original. For most video, any
value below 10 appears almost the same as the original
video.
SceneChangeDetectThreshold
Higher values of this setting cause the encoder to detect
more scene changes and insert extra I-frames as needed.
For example, a fast-action movie with many scenes
could have this value set lower than a newscast, but the
newscast video quality may suffer a little at the same
value. 45 is a good default for most applications using
MPEG4 encoding. 0 turns off scene change detection,
but is not recommended. Higher values also increase
CPU usage.
TrellisRDQuantization
This value performs Trellis quantization to increase the
visual quality of the encoded video by determining the
132


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Niagara 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Niagara 2200 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Niagara 2200

Niagara 2200 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info