555356
78
Zoom out
Zoom in
Previous page
1/90
Next page
Appendix B Troubleshooting
NI 17xx Smart Camera User Manual B-6 ni.com
Make sure that you have enabled the corresponding external lighting
strobe in MAX or Vision Builder AI. Complete one of the following
procedures to enable the correct lighting strobe.
MAX
1. Launch MAX.
2. In the Configuration tree, expand Devices and Interfaces.
3. Expand NI-IMAQ Devices.
4. Expand the smart camera you are using.
5. Select the channel you are using.
6. Select the Lighting tab.
7. Select the appropriate strobe from the External Strobe Generation
control.
Vision Builder AI
1. Launch Vision Builder AI.
2. In the Acquire Image (Smart Camera) step, select the Lighting tab.
3. Select the appropriate strobe from the External Strobe Generation
control.
Triggering Problems
No Trigger is Received
If you are not receiving a trigger, verify the following:
The trigger is wired to the TrigIn+/IsoIn(0)+ and TrigIn–/IsoIn(0)–
signals.
If TrigIn/IsoIn(0) and IsoIn(1) are both being used, that the devices
they are connected to are either both sinking (NPN) or both sourcing
(PNP).
The trigger is connected correctly based on the type of sensor it
is—sourcing or sinking. Refer to the Isolated Inputs section of
Chapter 2, Power and I/O, for information about connecting isolated
inputs.
The sensor power supply is of appropriate voltage for interfacing to
NI Smart Camera isolated inputs. Refer to the Isolated Inputs section
of Chapter 2, Power and I/O, for information about isolated inputs.
Refer to Appendix A, Specifications, for complete specifications.
78


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NI Vision NI 17xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NI Vision NI 17xx in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info