555356
73
Zoom out
Zoom in
Previous page
1/90
Next page
© National Instruments Corporation B-1 NI 17xx Smart Camera User Manual
B
Troubleshooting
This appendix provides instructions for troubleshooting the NI Smart
Camera.
Configuration Problems
The NI Smart Camera Does Not Appear in MAX or Vision Builder AI
Possible causes and solutions:
The smart camera may not be powered. Verify that there is power to
the smart camera and that both the smart camera and the development
computer are properly connected to the network. The POWER LED
should be lit green and the ACTIVITY/LINK LED should flash green
when refreshing the list of devices in MAX or Vision Builder AI.
The smart camera may have been configured on another network
subnet and then moved to the current network subnet. Reconfigure
the smart camera on the current network. Refer to the Subnet
Considerations section of Chapter 7, Ethernet Ports, for more
information.
Another device on the network is using the IP address assigned to the
smart camera. This can happen when you assign the same static IP to
two devices, you assign a static IP that is in the range of the IP address
available for DHCP use on your network, or the DHCP server assigns
the same IP address to another device. Either remove or reconfigure
the other device, or reconfigure the smart camera to use a different
IP address by moving the IP RESET DIP switch to the ON position
and reapplying power or restarting the smart camera. Refer to the
IP RESET Switch section of Chapter 6, LEDs and DIP Switches,
for more information.
You are experiencing firewall issues. If you are having difficulty
detecting the system and setting up the NI Smart Camera on your
network, you must configure the firewall to open the TCP/UDP ports
used by the smart camera and the host machine. Refer to the Firewall
Considerations section of Chapter 7, Ethernet Ports, for more
information about TCP/UDP ports.
73


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NI Vision NI 17xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NI Vision NI 17xx in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info