555356
55
Zoom out
Zoom in
Previous page
1/90
Next page
Chapter 6 LEDs and DIP Switches
NI 17xx Smart Camera User Manual 6-6 ni.com
NO APP Switch
Move the NO APP switch to the ON position to prevent a startup
application from running when the NI Smart Camera powers on. If you
want to permanently disable the application from running when the smart
camera powers on, you can disable the startup application in software.
To automatically run an application when the smart camera powers on,
keep the NO APP switch in the OFF position. You must configure the
application in software to automatically run when the smart camera powers
on. Refer to the LabVIEW Real-Time Module Help for more information
about automatically launching VIs when the smart camera powers on.
Refer to the NI Vision Builder for Automated Inspection: Configuration
Help for more information about configuring remote target options.
Keep the NO APP switch in the OFF position during normal operation.
CONSOLE Switch
With a serial port terminal program, you can use the CONSOLE switch to
read device information from the NI Smart Camera during startup, such as
the IP address and firmware version. When the CONSOLE switch is in the
ON position, the serial port outputs device information and is not available
for applications. The smart camera reads this switch only when powering
up or restarting and will only display device information during startup.
When the CONSOLE switch is in the OFF position, you can use the smart
camera serial port and NI-Serial driver software to send and receive serial
data. The NI-Serial software is installed when you install NI-IMAQ. When
using the NI-Serial driver, keep the CONSOLE switch in the OFF position
during normal operation.
Refer to the Connecting to Serial Devices section of Chapter 2, Power and
I/O, for more information about using serial communication with the smart
camera.
SAFE MODE
IP RESET
NO APP
CONSOLE
ON
SAFE MODE
IP RESET
NO APP
CONSOLE
ON
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NI Vision NI 17xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NI Vision NI 17xx in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info