555356

NI Vision NI 17xx Manual

51
Zoom out
Zoom in
Previous page
1/90
Next page
Chapter 6 LEDs and DIP Switches
NI 17xx Smart Camera User Manual 6-2 ni.com
Device Initialization
While the NI Smart Camera initializes, the POWER LED lights solid green
and the STATUS, IMG ACQ, PASS, and FAIL LEDs exhibit a scrolling
pattern. When the smart camera finishes initializing, the STATUS LED
lights solid green. If the system does not initialize within the expected
period of time, the STATUS LED flashes a status code. Refer to the
STATUS LED section for information about the status codes.
The initialization scrolling pattern will last longer than usual if the smart
camera is configured to acquire an IP address from a DHCP server but no
DHCP server is available on the network. When acquiring an IP address
from a DHCP server, the smart camera waits up to 60 seconds to acquire
an IP address. If the smart camera does not receive an IP address within
60 seconds, the device automatically restarts and tries again. The smart
camera attempts to acquire an IP address from a DHCP server three times.
If after the third time the smart camera has not been assigned an IP address,
the smart camera reverts to the unconfigured state and the IP address resets
to
0.0.0.0. The STATUS LED flashes to indicate that the smart camera is
in an unconfigured state.
POWER LED
The POWER LED indicates whether the power supplied to the camera is
adequate. The POWER LED is green while the camera is properly powered
on. When no power is being supplied to the NI Smart Camera, the POWER
LED is unlit. When power is first applied to the smart camera, the POWER
LED flashes red for one second while internal systems power up. If the
POWER LED stays red for longer than one second, it indicates that the
voltage is out of range.
STATUS LED
The STATUS LED is green during normal operation. The NI Smart
Camera indicates specific conditions by flashing the STATUS LED,
as shown in Table 6-1.
… 51 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NI Vision NI 17xx at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NI Vision NI 17xx in the language / languages: English as an attachment in your email.

The manual is 1,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info