Barometer
Entering Barometer the screen will display the temperature (in
Celsius), pressure (in hectopascal), and altude (in meters) of your
current locaon.
Select Sengs (SIM 1 key) to enter the correct elevaon of your
locaon when using the funcon for the rst me.
UV Sensor
Entering UV Sensor, select Ultraviolet Measure (ultraviolet radiaon
from the sun), or Ultraviolet Explanaon to read some suggesons
on how to use this funcon.
Using a sensor located in the vicinity of the LED ashlight, the phone
can actually check the UV radiaon intensity and oer advice and
guidance for sun exposure from me to me.
Ecompass
Entering Ecompass, you should be requested to calibrate the device
rst: please follow the on-screen instrucons, then press the SIM
1 key to start the calibraon procedure. If calibraon completes
successfully, the compass pointer will align itself with Earth’s north
magnec pole, and you will be able to verify your current direcon of
travel or heading.
Pedometer
Entering Pedometer, select Start pedometer: the count will show a
gradual increase as you move along at a regular pace; your total steps
will be converted in meters (the calculaon is based on stride length,
that you can set to match your own). When using Pedometer, please
hold the phone in your hand, and make sure your arm swings during
natural walking. Use Set stride length opon to x your average stride
length when you walk (in cm.); you can also save the Pedometer data
and scan through them using the opon View history.
Sunrise and sunset
Entering Sunrise and sunset, the screen will display the me of
sunrise and sunset, based on current latude and longitude and the
me of year. Use Sengs opon to insert current date and posion.
The geographic locaon can be specied in three ways: selecng one
city from the list, using GPS (GPS Fix) to determine your locaon, or
manually inserng your coordinates (Custom).
During Daylight Saving Time period, set Solar me and then enable
this opon.
How to navigate to your desnaon
1. Open main menu and select Find > Find road. Select region,
province or town you want from the list of matching names; you’ll
be required to enter the street name (if the street name is unknown,
browse the proposed list of streets ans places).
Aer conrmaon, you’ll get the map with the cursor posioned on
target. Selecng Opons, you can choose Set as Desnaon.
2. Alternavely, you can move the cursor on the map unl the
desnaon required is displayed; then open Opons menu, and
choose Set as Desnaon. The system can calculate the route by
using three dierent methods (fastest / shortest / fastest avoiding
toll roads). Select the desired method.
