567582
9
Zoom out
Zoom in
Previous page
1/43
Next page
Vanity QWERTY User Manual
9
Connector scheme
Notes on battery
Notes on battery
Battery performance is influenced by several factors, including network settings, signal strength, intensity of use,
temperature, functions and settings chosen and used, used accessories, ringtones, data or other applications.
For best performance, please observe the following rules:
A new battery or a battery left unused for a long time require longer charging times. The standard battery voltage
is 3.6V-4.2V.
During charging, keep the battery at a temperature close to ambient.
With the passage of time, the battery will gradually be subjected to wear and thus need more time to recharge.
However, if after a normal charging time of use and the decrease of charging increases, you need to buy another
battery from the original manufacturer or authorized it. Batteries of inferior quality could damage the phone and
cause trouble!
If your phone has been used extensively with a low charge level, you may need a longer time before the indicator
is shown on the screen while charging.
Note: Take care to dispose of the batteries according to local regulations. Try to recycle the batteries as possible. Do
not throw batteries in the trash.
Caution: Do not dispose of batteries in fire, as there is a real risk of explosion.
Caution
Charging the phone by improper means may cause explosion. Always refer to the rules governing the disposal of
batteries.
PIN code
PIN code
PIN1 code: the personal identification number used to access the SIM and can stop other people using the SIM
without permission. If the security code PIN1 has been activated in your phone, switch on the screen will display
"Enter PIN ". In the process of inclusion of PIN1, will be used to display "*" to represent the contents of the input. You
can get the PIN1 when they acquired the SIM.
PIN2 code: This is the personal identification number used for some special functions.
PUK and PUK2 code (8 digits): to change a blocked PIN code, you need to use the PUK (Personal Unblocking Key).
To change a blocked PIN2 code, you will need to use the code PUK2. If these two codes were not supplied with the SIM
cards! Make request from your network operator.
Warning: if a PIN is entered incorrectly three times in succession, the SIM card is blocked. Please immediately contact
your service provider for instructions. Do not try to force the code because the SIM card may become unusable!
USB CONNECTOR
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NGM Vanity Qwerty at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NGM Vanity Qwerty in the language / languages: English as an attachment in your email.

The manual is 1,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info