567627

NGM Van Gogh Manual

30
Zoom out
Zoom in
Previous page
1/42
Next page
30
30
User Manual
(separately for SIM1 and SIM2) when you got messages left on your answering machine. In Messages, you can
listen to answering machine messages stored in your phone’s own internal memory. This feature allows to save
money avoiding connection to mobile network operator’s voicemail system. In Settings, you can enable/disable the
auto-answer, select the storage path for the messages (phone or memory card), set the pickup time (3, 5, 10 or 30
seconds), set the max. record duration (30 seconds, 1 minute, 3 minutes, 5 minutes, or unlimited), select the
greeting message (predefined file or user-defined audio), and finally enable remote access to the answering machine
through a DTMF compatible phone. To listen for messages from remote, enable the answering machine as well as
Remote access in Settings menu; you need then a touch-tone telephone to send DTMF. When the voice mail system
answers and prompts you to leave a message, then digit “#” and wait until the system prompts you to enter your
password (1234 by default)).
Note: remote access supports only the listening function.
Phone control
Phone Control is a function that has been designed to improve mobile device users’ privacy and security. It is
composed of two applications (SIM binding and Remote Control), allowing user to manage security in different
modes and with varying levels of security strength.
SIM binding
The SIM binding function is offered to help end-user to find his phone just in case it has been lost or stolen. The
function is based on the binding between SIM card and phone: the device shall be able to recognize when a different
SIM card has been inserted in the phone and immediately alert by SMS the 5 trusted numbers previously set by the
user. By activating this option, the phone password will be requested (1122). Please refer to the paragraph
“Security settings” in the chapter “Settings” for the instructions on how to modify this password. Select “SIM
binding” and choose “On” to enable the function. The user must now insert
at least one number for SMS
notification.
From Phone Control menu, select “Trusted Numbers” and insert up to 5 phone numbers to receive the message.
After completing configuration, at every start-up the phone will check the presence of the SIM cards to which is
bound to. If the two SIM cards are inverted or one of them has been removed, the phone shall starts regularly. If a
not-bound SIM card is inserted on SIM1 or SIM2 slot, the phone shall display the “Input phone password” popup
(the default password is 1122, freely modifiable by user). If the password is correctly inserted, the phone shall
starts regularly, but a popup should advise the user that the SIM card is changed: “SIM card is changed. Do you
want to bind it?” Choosing “Yes”, the current SIM cards will be bound replacing the old ones; choosing “No”, the old
binding will remain active. If the password is wrongly inserted, the phone shall start and provide the “new” user all
the functionalities except the “Phone control” menu. In the meantime, one alert SMS ( - Attention: this phone
number is using your mobile phone IMEI: XXXXXXXXXXXXXXX - ) shall be sent to all the trusted phone numbers set
in the menu from each replaced SIM card. Every time the power on password is wrongly inserted, the phone shall
continue to send SMS out. If SIM1 has no money or is out of range, SIM2 shall provide to send alert SMS out. If the
SMS is not correctly sent out for any reason, the phone shall attempt to send the SMS out periodically, until the SMS
is correctly sent out.
Note: if Phone lock is enabled, this function chronologically comes before SIM binding. This means that even if
the SIM binding is activated, it will be unavailable if the wrong password is inserted (because the phone simply
won’t boot).
Tip: to avoid this problem, it’s advisable to disable Phone lock and enable Privacy firewall instead, since this
function assures the same high level of security and does not inhibit the use of SIM binding.
Remote control
The Remote control function is offered to provide end-user the possibility to manage some phone functions
remotely from another phone able to send SMS out. Using this function, end user can, when he has not the
phone with him, forward calls, power the phone off, activate the answering machine. By activating this option, the
phone password will be requested (1122). Please refer to the paragraph “Security settings” in the chapter
“Settings” for the instructions on how to modify this password. Select “Remote control” and choose “On” to
enable the function. The user must now insert at least one number for SMS notification. From Phone Control
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NGM Van Gogh at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NGM Van Gogh in the language / languages: English as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info