567585
11
Zoom out
Zoom in
Previous page
1/47
Next page
User Manual
11
Charging the battery
The new battery will reach the optimal efficiency when it has undergone several continuous complete charges and
discharges. When the battery is low, charge it in time. Over-discharge can damage the battery.
First, remove the USB connector cover. Connect the charger to the AC power supply and to the phone USB
connector. During charging, the battery capacity icon on the screen will report the charging process. After the
battery is full, the battery icon will be full. Cut the connection of the charger with the AC power supply and then
the connection of the charger with the mobile phone.
Note: Slight heat formation during charging is normal.
Warning: when a travel charger and its accessories are used to charge the battery, please check first that they are
original or recognized by the manufacturer. The use of other accessories may damage your mobile phone and
cause risks! Always use them indoor and in dry places.
Warnings on the use of the battery
The performance of the battery is affected by many factors, including network settings, signal strength, work
temperature, chosen and used functions or settings as well as phone accessories, tone, data or other applications.
For optimal performances, please follow the rules below:
New batteries or a battery unused for a long time need a longer charging time. The standard voltage scope
for the battery is 3.6V-4.2V.
During charging, keep the battery around room temperature.
With time passing by, the battery will gradually be worn and thus needs longer time to charge. This is
normal. However, after normal charging, if call duration decreases while charging time increases, you will
need to buy another battery from the original manufacturer or one authorized by the manufacturer. The
battery of lower quality can damage your mobile phone and cause danger!
If the phone is overused at low battery level, it might need a longer time for the charging indicator to be
shown on the screen.
Note: please dispose the battery according to the local regulations. Try to recycle the battery if possible. Do not
treat the waste battery as common waste.
Warning: do not throw the battery into fire so as to prevent fire hazard. The broken battery may cause explosion.
Warning:
Charging the mobile phone by improper means can cause to explosion. Always refer to the related
regulations for the disposal of the battery.
PIN code
PIN1 Code: it is the personal identification number used to enter SIM and prevents others from using the SIM
without permission. If the mobile phone has activated the PIN1 code protection, when powered on, the screen will
display “Input PIN”. During the process of inserting the PIN1 code, the screen will show *to represent the input
content for privacy. You will obtain the PIN1 (and further) code when buying your SIM card.
PIN2 Code: it is the personal identification number used for some special functions.
PUK Code and PUK2 Code (8 digit): to change the locked PIN code, you need to use PUK (Personal Unblocking
Key) code. To change the locked PIN2 code, you need to use PUK2 code. If these two codes are not provided
together with the SIM cards, ask your service provider.
Warning: if you input the wrong PIN code for three times continuously, the SIM card will be locked. Please contact
the network operator immediately for help. Attempts to unlock the code may make the SIM card ineffective
forever!
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NGM Raptor at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NGM Raptor in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info