567576

NGM Blade Manual

35
Zoom out
Zoom in
Previous page
1/40
Next page
User Manual
35
Text Input
The mobile phone provides multiple convenient input modes, with support of other functions. Use the option
Input method to select the desired mode. Besides the standard mode, you have the opportunity to use the T9
method (set as default method; use Input method options to enable/disable or add words), a system for
predictive text entry.
Basic letter input
Choose between the modes “T9 en”, “T9 En”, “T9 EN”, “abc” , “ABC” e "123", and insert the desired characters
with the keyboard. The abbreviation that is visualized in relation to the selected mode may vary according to the
language chosen for text input.
Numeric input (123)
This mode is mainly used to input phone numbers etc. After “Numeric” method has been chosen, you can input
digit into the place where the cursor is flickering.
Symbol input
To see the symbol list, press “*” key in the "Write message" screen . If you want to use one symbol, press the
up/down/left/right keys to select it.
UART settings
Enable the UART settings on one of the two SIM cards.
Restore factory settings
Reset your device to the original settings. The password required to perform this operation is "1122".
2. Network settings
 Network selection: for each SIM you can decide between an automatic selection and a manual one.
 Preferences: for each SIM you can browse a list of networks where to register and assign a priority.
Note: other options could be available depending on the network operator.
3.Security settings
For each SIM card, the following options are available:

SIM lock: you can set up the SIM card lock on your phone, so that it can't be used without a Personal
Identification Number (PIN). When the lock is enabled, you must enter the PIN each time you turn the phone
on. You also have the option to change the PIN.

SIM fixed dial: this option, if supported by your SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers, that you are required to specify in a special list (you are required to enter the
PIN2 code).

SIM barred dial: this option, if supported by your SIM card, allows you to block outgoing calls to specific
numbers, that you are required to specify in a special list (you are required to enter the PIN2 code).

Change password: you can change here PIN and PIN2 code for each SIM card.
The following general options are also available:

Phone lock: you can set up the phone lock, digiting the requested password (the default password is “1122”).
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NGM Blade at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NGM Blade in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info