620465
12
Zoom out
Zoom in
Previous page
1/68
Next page
Hard-wire power cable:
For use when a 12-24Vdc outlet is not available, or when a permanent installation is required.
1. Waterproof connector for BikeCam
Before connecting the power cable to the BikeCam, pull back the adaptor threaded housing to
expose the Mini-USB connector and locating lug. Make sure these are both correctly aligned with
the BikeCam sockets and then insert, re-locate the adaptor threaded housing and tighten, finger
tight only.
2. 12-24Vdc to 5Vdc convertor
The converter changes the 12-24Vdc power supply into 5Vdc output, as required by the
BikeCam.
It also has the function of protecting both the BikeCam and power source (motorbike) from
over-voltage, over-current, over-temperature and short-circuit.
3. In-line fuse holder
The hard-wire cable is fused to protect the BikeCam and power source from damage as a result
of voltage / current surges, short circuit, cable damage or product failure.
The fuse (2Amp 20mm) is user-replaceable, unscrew the housing, replace the fuse and
re-assemble.
4. Positive (+) ring terminal on red cable
Positive ring terminal (6mm inner diameter), for connection to the positive pole on the battery.
5. Negative (-) ring terminal on black cable
Negative ring terminal (6mm inner diameter), for connection to the negative battery pole or
motorbike chassis to ground the hard-wire cable.
Note:
- The hard-wire power cable is fitted with fuse (2A 20mm) to protect the BikeCam and power
source from damage as a result of voltage / current surges, short circuit, cable damage or
product failure.
The fuse is user-replaceable by unscrewing in-line fuse housing, replace the fuse and
re-assemble.
See next page for hard-wire kit installation instructions.
1
2
3
4
5
INSTALLATION (CONTD.)
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nextbase Ride - Bike cam at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nextbase Ride - Bike cam in the language / languages: English as an attachment in your email.

The manual is 24,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info