552650
34
Zoom out
Zoom in
Previous page
1/47
Next page
32
----- Troubleshooting
If you are experiencing trouble with your devices, first make sure that all cables are
connected to their proper ports and are firmly seated.
I can’t connect to the NewStar Digital KVM via IP.
Check if the network connection is working (ping the IP address of NewStar Digital KVM
via IP). If not, check network hardware. Is NewStar Digital KVM via IP powered on?
Check if the IP address of NewStar Digital KVM via IP and all other IP related settings are
correct, referring to the diagram on page 7. Also verify that all the IP infrastructure of your
LAN, like routers are correctly configured. Without a ping functioning, NewStar Digital
KVM via IP can't work.
I can’t login via SSH.
Was the correct user and password given? The default username and password as
shipped from the factory is username admin with a password of admin. Configure your
browser to accept cookies. The user name and password are case sensitive, check the
status of the Caps Lock on your keyboard. If you see a warning about “identity of host
cannot be verified”, and a question about saving the host's fingerprint, this is normal for the
first time you connect to any machine running SSH. You should answer “yes” so that your
SSH client saves the public key of this host and doesn't re-issue this warning.
Forgotten the master password.
Reset the master password using the serial interface on the module refers to page 12. Use
the S command, and type a new password. The old password is not required for this
procedure.
The mouse on the remote site does not work or is not synchronized.
a. Make sure there is only one mouse driver installed in each computer.
b. Set the mouse acceleration to 'None' in the host mouse driver properties.
c. Windows XP has a setting called 'Enhance pointer precision'. This should be disabled
for correct mouse synchronization.
Remote mouse and local mouse don't line up.
Use the “mouse resync” command in the main menu or press the “Resync” button on the
Bribar. If the mouse pointers still don't line up, verify that mouse acceleration has been
disabled.
NOTE: The Windows login screen does not accept the “mouse acceleration” option, and
always has the mouse accelerated regardless of your configuration. Therefore, on this
screen it is best to avoid using the mouse.
After “Resync”, the mouse on the remote site is synchronized, but there is small
constant offset between remote and local mouse cursors.
This is a video position error. Normally a slight video positioning error is perceived as a
mouse sync issue. A video positioning error is visible as a black line along the top or
bottom (and right or left) edges of the remote screen. On the “Video Tuning” menu (please
see the diagram on page 18.), use the arrows under "Picture Positioning" to move the
screen until the two pointers exactly line up. Remember to save your position changes!
Monitor works, but keyboard and mouse do not.
Make sure you haven’t swapped the keyboard and mouse cables
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newstar NS-1105IPEXT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newstar NS-1105IPEXT in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info