24211

Newpol XF7_1407DG Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
SM1791
6
GB
EXPLANATION OF DISPLAY SYMBOLS:
VOCE: El programa se iniciará al cabo de : 1 hora 2 horas, 3 horas, 4 , 5, 6, 7 ,8, 9, 10, 11,12,13,14, 15,16 horas
*
Values may vary according to the model
VOCE: “Ha iniciado el programa” + (repetir la selección de programa, velocidad, pulsadores ) + beep beep
VOCE:
Ha efectuado un reset + beep-beep ( sonido)
DISPLAY AND DURATION OF THE WASH CYCLE:
At each program position selected with knob
(P), the display will indicate the corresponding
spin speed, the wash phase and the cycle
duration time. The time display will reduce as
the cycle progresses to arrive at zero on
completion of the program. At this point, the
word "END" will appear on the display. The
washing can now be removed from the
machine.
N.B. In the cotton programs, the duration of
the wash cycle is purely indicative, in that
this can depend on a number of factors such
as the temperature and pressure of the feed
water and the quantity of washing loaded in
the drum. During the wash, the machine's
electronics will automatically modify the time
necessary to complete the selected wash
on the basis on these factors. This will
produce the best wash performance in the
shortest time period.
h. m.
DELAYED START:
h. m.
The washing machine is equipped with a
function that allows the start of the wash to
be delayed for up to a maximum of 16 hours.
Each time button (1) is pressed, the number
of hours from 1 to 16 that the washing machine
will wait until starting the wash cycle is
displayed (e.g. H.3 indicates that the wash
cycle will start in three hours' time). After
pressing button (7) the washing machine will
automatically start the wash cycle after the
preset delay period.
START BUTTON:
567
After all the operations described in points 1
to 10 of paragraph "WASH CYCLE" have
been carried out, pressing this button will start
the wash cycle.
When the button is pressed, it will light up
after approximately 2 -3 seconds to indicate
that the wash program has started.
The display can be used to monitor the progress of the selected wash program. At the end
of the wash cycle, all the symbols will disappear and the word "END" will appear.
The washing machine is effecting the pre-wash or main wash.
The washing machine is effecting the rinse cycle.
The washing machine is effecting the spin cycle.
“El programa ha finalizado” + beep beep
"STOP" ON PROGRAMMER:
The stop function resets the washing
machine.
If, for any reason, you want to change the
wash program or add more washing to
the load during the wash cycle, simply
place the programmer knob in position
"STOP" (3 lines will flash on the display
and the "START" button light will go out).
Then re-position the knob on the new
program and press the "START" button.
Warning!! only use this function if
strictly necessary and then only if
the program to reset has not been
running for more than 3 minutes.
Before opening the door after a
reset, wait 2 minutes for the
locking mechanism to release.
A mano
Rápido
Cotidiano
En frío
Acl
a
r
a
do
Centrifugado
30°
90°
40°
30°
40°
60°
40°
30°
30°
40°
60°
75°
30°
35°
40°
stop
l
a
n
a
-
d
e
l
i
c
a
d
o
s
i
n
t
é
t
i
c
o
a
l
g
o
d
ó
n
STOP
h. m.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newpol XF7_1407DG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newpol XF7_1407DG in the language / languages: English, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info