24237

Newpol XF6_600EL Manual

6
Zoom out
Zoom in
Previous page
1/20
Next page
reason, you want to change the
wash programme or add more
washing to the load during the
wash cycle, simply place the
programmer knob in position
“STOP” (the button will start to
flash). Then re-position the knob
on the new programme and press
the “START” button.
SM1744
GB
6
USING THE WASHING MACHINE
START BUTTON
After selecting the required
programme, press this button to
start the wash cycle Button (L) will
light up to indicate the wash cycle
has started.
Warning!! only use this
function if strictly necessary
and then only if the
programme to reset has been
running for a few minutes.
Before opening the door after
a reset, wait 2 minutes for the
locking mechanism to release.
PROGRAMMER KNOB “STOP”
The stop function resets the
washing machine. If, for any
OPTIONAL FUNCTIONS
PREWASH
Press this button and the machine
will perform a prewash at the
maximum temperature of 40°C.
This function can only be used on
the “COTTON” and
“SYNTHETICS” programmes.
N.B. When this option is used,
the detergent must also be added
to the appropriate prewash
compartment.
EXTRA RINSE
The washing machine has been
designed to reduce water
consumption to a minimum. In
very soft water areas, or in the
case where detergent residues
are noticed at the end of the wash
cycle, pressing this button will add
one more rinse to the programme.
NB. The use of this function depends
on the type of programme selected.
Consequently, if the wash
programme does not include this
function, the button cannot be
enabled (see PROGRAMME
TABLE”).
The figure alongside shows the 5
main functions of a PREWASH,
WASH, RINSE, SPIN, END wash
cycle:
Each of these functions will be
highlighted during the wash by a
led.
In this way, the user is constantly
aware of the progress of the wash.
After the spin phase, the
MONITORING THE WASH
corresponding led will stay lit for
approximately 2 minutes. This is
the time lapse necessary for the
door release mechanism to work,
after which the END led will light
up.
At this point, press the On/Off
button, open the door and remove
the washing.
L
STOP
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Newpol XF6_600EL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Newpol XF6_600EL in the language / languages: English, French, Portuguese, Spanish as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info