811158
10
Zoom out
Zoom in
Previous page
1/75
Next page
8 GB
8.1 Modes
The toothbrush|6 has 3 different modes. De-
pending on the desired mode, press the on/
off switch |11 1, 2 or 3 times while
switched off:
- 1x: normal mode
- the red LED|13 is lit.
- for cleaning teeth with high pulsation
- 2x: sensitive mode
- the blue LED|14 is lit.
- gentle brushing for cleaning teeth
with sensitive gums
NOTE: if you are not used to using an elec-
tric toothbrush and you have comparatively
sensitive gums, you can use this mode for
the first 1 to 2 weeks, and then switch to nor-
mal mode later.
- 3x: massage mode
- the green LED|15 is lit.
- pulsing brushing to massage your
gums
8.2 Brushing teeth
1. Remove the toothbrush|6 from the bat-
tery charger|9.
2. Moisten the bristles, squeeze some
toothpaste on and switch on the tooth-
brush|6 only when the brush head|2 is
already in your mouth.
3. Depending on the desired mode, press
the on/off switch |11 1, 2 or 3
times:
-red LED|13: normal mode
-blue LED|14: sensitive mode
-green LED|15: massage mode
4. Slowly guide the brush head|2 from
tooth to tooth without exerting too much
pressure. Carefully clean all tooth sur-
faces, the inner surfaces of the teeth
and the tooth edges.
Figure C: the recommended brushing
time is at least 2 minutes, divided up
into 30-second periods for each area of
the mouth (bottom right, bottom left, top
right, top left). The toothbrush|6 indi-
cates these intervals with 2 brief inter-
ruptions. After 2 minutes there are
several short interruptions to indicate
that the recommended brushing time
has been reached.
5.
Press the on/off switch |
11 repeated-
ly until the toothbrush|6 is switched off.
Remove the brush head|2 from the
mouth only when the toothbrush|6 has
been switched off.
NOTES:
We recommend that you replace the
toothbrush heads|3 every 3 months or
after infections (see “Ordering tooth-
brush heads” on page 10).
Figure B: the indicator bristles|16 on
the brush head|2 slowly lose their col-
our during use. The decolouration
shows when the toothbrush heads|3
should be replaced.
9. Transport when
travelling
9.1 Transport lock
To secure the toothbrush|6 against acciden-
tally being switched on, activate the trans-
port lock.
Switching on the transport lock:
Press the on/off switch |
11 until the
red LED|13 flashes once.
If you try to switch on the toothbrush|6
with the transport lock activated, the
red LED|13 will flash.
Switching off the transport lock:
Press the on/off switch |
11 repeated-
ly until the toothbrush|6 is switched on.
Change the mode if required by press-
ing the on/off switch |11 again.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nevadent NZAOD 600 A1 - IAN 317154 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nevadent NZAOD 600 A1 - IAN 317154 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0.73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info