679176

Nevadent NSZB 3.7 B2 - IAN 290415 Manual

9
Zoom out
Zoom in
Previous page
1/23
Next page
NSZB 3.7 B2
■ 6 
│
 GB
│
IE
│
NI
7) After 30 seconds, the toothbrush stops briefly to signal that you should
start cleaning the next quadrant. Clean each jaw quadrant using the same
technique.
8) After two minutes, the toothbrush stops briefly 2 times. This informs you
that you have complied with the dental recommendation of two minutes
cleaning.
9) Press the on/off switch repeatedly until the toothbrush stops.
10) Then take the toothbrush out of your mouth.
11) After use, rinse the brush head thoroughly under running water.
12) Remove the brush head from the handset.
To clean the drive shaft and the handset, hold them under running wa-
ter for a short while. Hold the handset so that the drive shaft is pointing
downwards at an angle.
NOTE
Massage your gums regularly. This promotes blood circulation and helps to
keep them healthy. Set the mode to "Pulse" and guide the moistened brush
over your gums with a light pressure.
Cleaning and care
DANGER – RISK OF ELECTRICAL SHOCK!
► Always remove the plug of the charger from the power socket before
cleaning the appliance! There is a risk of electric shock!
Do not immerse the handset or the charger in water or other liquids!
WARNING – PROPERTY DAMAGE!
► Do not use detergents or solvents. They can damage the plastic surfaces.
NOTE
Never open the housing of the charger or the toothbrush! They cannot be
resealed in a watertight manner.
1) Dismantle the charger for cleaning:
– Hold the lower part of the charger firmly and tilt the top part, which
contains the brush holders , towards the rear.
2) Clean the upper part of the charger under running water. If any tooth-
paste residue in the brush holders cannot be removed, soak the upper part
of the charger in warm water and then rinse out the brush holders .
3) Clean the lower part of the charger only with a soft, slightly damp
cloth.
4) Remove the brush head from the handset. After use, clean the brush
heads thoroughly under running water.
We recommend cleaning the brush heads in a standard commercial
denture cleaning fluid every 2 - 4 weeks. A new brush head should
be used after about 3 months, at the latest when the bristles start to bend
outwards.
5) To clean the drive shaft and the handset, hold them under running water
for a short while. Hold the handset so that the drive shaft is pointing
downwards at an angle.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nevadent NSZB 3.7 B2 - IAN 290415 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nevadent NSZB 3.7 B2 - IAN 290415 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nevadent NSZB 3.7 B2 - IAN 290415

Nevadent NSZB 3.7 B2 - IAN 290415 User Manual - German, Dutch, French - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info