679178
9
Zoom out
Zoom in
Previous page
1/45
Next page
6 
GB
IE
NI
CY
NAZ 2.4 C3
3) Open the lid 0 of the brush holders q and place the replacement brush
heads in the four slots provided. Close the lid 0 again.
4) Place the handset on the charger 8 so that it slides onto the pin on the
base.
5) Allow the handset to charge up for around 14–16 hours before using it for
the first time. The charging light 7 on the front of the handset lights up red
during the charging process.
6) Use the handset repeatedly without charging the battery until the perfor-
mance becomes noticeably weaker or the toothbrush stops working and
the charge indicator 7 flashes red. Then recharge the battery for 14–16
hours. When the appliance is fully charged, the charge indicator 7 lights up
green.
7) Charge and discharge the toothbrush completely 3 times. The battery will
have then reached its full capacity.
8) You can now leave the handset in the charger 8 after every use, so as to
always have full power available.
Fitting/removing brush heads
To remove the brush head 1, pull it upwards and off the drive shaft 2.
When fitting the brush head 1, ensure that the drive shaft 2 on the handset
slides precisely into the socket on the brush head 1.
Push the brush head 1 down until it completely covers the drive shaft 2.
NOTE
You can order replacement brush heads from our Service department
(see section "Ordering replacement parts").
You can also use the brush heads for the models NAZ 3.7 A1 and
DAZD 3.7 LI B2 (also available from Lidl).
The toothbrush is also compatible with brush heads from the following
Oral B
©
* models:
Oral-B Ortho, Oral-B Precision Clean, Oral-B 3D White, Oral-B Cross
Action, Oral-B Stages Power, Oral-B Sensitive, Oral-B Deep Cleaning.
*Oral-B is a registered trademark of Procter & Gamble.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nevadent NAZ 2.4 C3 - IAN 288765 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nevadent NAZ 2.4 C3 - IAN 288765 in the language / languages: English as an attachment in your email.

The manual is 0,81 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Nevadent NAZ 2.4 C3 - IAN 288765

Nevadent NAZ 2.4 C3 - IAN 288765 User Manual - German, Dutch, Danish, French - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info