600356

Nevadent DAZD 3.7 Li A1 - IAN 108262 Manual

8
Zoom out
Zoom in
Previous page
1/69
Next page
5
DAZD 3.7 Li A1
GB
IE
8) Ensure that the power cable is not trapped
and that it lies properly in the cut-outs.
First use
NOTE
Before starting to use the appliance, check that
it is in fault-fr
ee condition. If it is not, it must not
be used.
1) Insert the plug into the mains power socket.
2) Before initial use, clean the new brush heads 1
with fresh water.
3) Open the lid 2 of the charger 8 and place
the replacement brush heads on the brush
holders. Re-close the lid 2.
4) Place the handset on the charger 8 so that
it slides onto the pin on the base.
5) Allow the handset to charge up for around
14 - 16 hours before using it for the fi rst
time. The charge indicator 7 on the front of
the hand appliance lights up red during the
charging process.
6) Use the handset repeatedly without charging
the battery until the performance becomes
noticeably weaker or the toothbrush stops
working and the charge indicator 7 blinks red.
Then recharge the battery for 14 - 16 hours.
When the appliance is fully charged, the
charge indicator 7 lights up green.
7) Charge and discharge the toothbrush com-
pletely 3 times. The battery will have then
reached its full capacity.
8) You can now leave the handset in the char-
ger 8 after every use, so as to always have
full power available.
Fitting/removing brush heads
■ To remove the brush head 1, turn it clockwise
and then pull it upwards.
■ To fi t the brush head 1 place it slightly off set
on the hand element and then turn it anti-
clockwise.
NOTE
To avoid damage to the appliance, always use
original brush heads.
(F
or replacement brush heads, see the order
card)
Operation
This toothbrush has 3 diff erent performing levels:
– “Clean”: normal speed,
or
ange “Clean” LED 4.
For cleaning the teeth.
– “Soft”: slow speed, green “Soft” LED 5.
F
or cleaning the teeth of people with
sensitive gums.
– “Pulse”: alternating speeds,
yellow “Pulse” LED 6.
For massaging the gums.
■ Press the on/off switch 3 once to activ
ate the
“Clean” mode. The “Clean” LED 4 lights up.
■ Press once more to switch to “Soft” mode.
The “Soft” LED 5 lights up.
■ Press it a third time to switch to “Pulse” mode.
The “Pulse” LED 6 lights up.
■ To switch the toothbrush off , press the on/off
switch 3 once mor
e.
IB_108262_DAZD3.7LiA1_FI_SE_DK_NL.indb 5 10.02.15 16:52
… 8 …


Need help? Post your question in this forum.

Forumrules
1

Forum

nevadent-dazd-3.7-li-a1---ian-108262

Reset search

  • Where can I buy a replacement brush head pack? For the DAZD 3.7 Submitted on 29-8-2018 at 13:23

    Reply Report abuse

  • how do I change the brush on a dad 3.7 lib2 ian 285254 Submitted on 12-4-2018 at 16:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Nevadent DAZD 3.7 Li A1 - IAN 108262 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Nevadent DAZD 3.7 Li A1 - IAN 108262 in the language / languages: English, German, Dutch, Danish, Swedish, Finnish as an attachment in your email.

The manual is 0,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info