629269

NetworX NX-148E LCD Keypad Manual

11
Zoom out
Zoom in
Previous page
1/24
Next page
LCD KEYPAD 11
OPT KEYPAD FEATURES
1 NOT USED
2 SILENT KEYPAD? Enable Silent Keypad Option. If enabled, only the entry/exit and
sounder chime are silenced.
3 DING DONG CHIME? Enable Ding Dong Sound for Chime. If off, chime will be a single
tone. (Refer to NX control panel installation manual, location 40)
4 5 SEC. SILENCE? Enable Keypress Silence Option. Silences the pulsing keypad
sounder for 5 seconds when a key is pressed.
5 ARMED ZONE INFO? Enable Armed Zone Information. If on, the LCD keypad will display
faulted or bypassed zone information when the system is armed.
6 BEEP ON PANICS? Enable Panic, Fire, and Medical Beeptone. Will sound a short beep
to verify that the keypress was accepted.
7 DISABLE SERVICE? Suppresses the "Service" Message. This will not allow the "Service
Required" message to be displayed for any reason. If there is a
system trouble,
r will still show the "Service Required" menu.
8 MASTER KEYPAD? Enable Multi-partition Mode
9 CUSTOM MESSAGE? Enable Custom Message Display
10 CLOCK? Enable Clock Display
11 CUSTOM MSG. LOCK? Enable Custom Message Lock. Prevents over-writing the custom
message during keypad copy.
12 SELECT AN OPTION: Programs special characteristics.
1=Display “Press r For Help”
2=Disable LED Extinguish on this keypad
3=On if PIN should be hidden when programming
4=On suppresses beeps when an RF transmission is lost
5-8=RESERVED (Do not program!)
6f. SET KEYPAD NUMBER AND PARTITION
ACTION RESULT

Prompts to “Please Enter Your Code".
[program code]
Prompts for the keypad number.
The current keypad number will be displayed
in the lower right hand corner.
[keypad number]
Prompts for the partition number.
The current partition will be displayed in the
lower right hand corner.
[partition number]
Automatically exits this mode.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for NetworX NX-148E LCD Keypad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of NetworX NX-148E LCD Keypad in the language / languages: English as an attachment in your email.

The manual is 0,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info