This works on a single partition keypad. If your system does
not arm, check that all the zones are closed and no tampers
have occurred.
123
45
Press OK and enter your
user code.
Press the keys to
scroll to Users>Users 1-
10>User 1>User Code
and press OK.
Enter the new user code.
The new numbers
overwrite the existing
code. If your code is
displayed as dashes, the
dashes change to stars.
Press OK.
Enter the new user code
again to confirm it and
press OK.
Changing your user code
Only the user with master user rights is allowed to perform
this operation. The regular user has no rights to edit his/her
own name nor user code.
123
4
Enter your user code.The keypad sounder
stops.
Your system is disarmed.
Disarming
This works on a single partition keypad.
When you open the door to enter the secured partition, the
entry delay starts and the keypad sounds continuously.
123
Enter your user code. The siren stops ringing
and the keypad stops
beeping.
The alarm memory
displays the zone(s)
where the alarm has
occurred.
Press the keys to
scroll through the alarm
memory.
Press OK to exit the
alarm memory view.
Your system is ready to
arm.
Disarming after an alarm
A burglary alarm and a tamper alarm activate a continuos
siren. A fire alarm activates a pulsed siren. All alarms cause
the keypad to beep rapidly.
123
456
Enter your user code on
a multi partition keypad.
The current status of the
partitions is displayed.
9
Partition is disarmed
Partition is armed
Partition is part armed
Enter the number of the
partition you want to
change.
Selected partitions
display a ? symbol.
In this example, partition
2 and 4 are selected.
Press 0 to include all
partitions.
Press to Arm Stay, press to Arm Away, press to arm in Night
Mode, press to Disarm.
If arming, follow steps 3-5 in the Arming section.
If disarming, the keypad is silenced.
Arming and disarming with a master keypad
Arm Away arms your entire system (except bypassed zones).
Arm Stay part arms your system (interior zones and bypassed zones) when you
want to allow people to remain inside.
4
Enter your user code.The siren stops ringing
and the keypad stops
beeping.
The alarm memory
displays the zone(s)
where the alarm has
occurred.
Press the keys to
scroll through the alarm
memory. Press OK.
Press OK to enter the
Quick User menu. Press
the keys to scroll to
Detector Reset. Press OK.
The fire detectors are
reset and the fire icon
disappears from the LCD
display.
Resetting the fire detector
If a fire alarm occurs, you must turn off the alarm and then
reset the fire detectors.
123
456
****
****
1122
11221122
1122
1122
User Code
****
Confirm Code
****
System Ready
Type Code to Arm
8 Alarm Memory
PIR Bedroom
6 Alarm Memory
Upstairs
System Ready
Type Code to Arm
Commands
Reset Smoke Det>
OK
OK
OK
OK
OK
Note:
Press to Arm Stay,
press to Arm Away,
press to arm in
Night Mode.
123
1122
1 2 3 4
9
1 2 3 4
9
?
9
?
Note: This Quick Guide describes how to use the keypad menu to perform standard tasks. The User Guide contains more information on using function keys to perform tasks. Your keypad may work slightly differently, depending on how it was set up by your installer.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for NetworX NX-10 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of NetworX NX-10 in the language / languages: English, Dutch, French as an attachment in your email.
The manual is 1,07 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
