Manual Netgear XWN5001 Powerline 500 WiFi Access Point (page 25 of 48) (English)

608404

Zoom out

Zoom in

1/48

Using NETGEAR genie

Powerline 500 WiFi Access Point (XWN5001)

Turn LEDs Off or On

For each device in your Powerline network, you can turn the LEDs off or on.

 To turn the LEDs off or on:

1. On the

Powerline Utility screen, right-click the Powerline device icon.

2. On

the pop-up menu, select either Turn LED off or Turn LED on.

A pop-up screen displays advising you that connectivity will be temporarily lost while the

LEDs are being reset.

3. Click OK. The genie

displays a message indicating that the operation was successful.

Click OK.

Set the Powerline Encryption Key

Powerline devices on the same Powerline network must use the same encryption key. The

factory default encryption key is HomePlugAV.

In locations such as apartment buildings or office buildings, others might use the same

lectrical power lines that you use for your Powerline network. To protect your Powerline

network from unwanted access, you can customize the encryption key for your Powerline

devices. Make sure that you set up the same encryption key for all of your Powerline devices

so that they can communicate with each other.

You use the Security screen in the NETGEAR genie

Powerline Utility to set encryption keys.

If you customize the encryption key and then forget what it is, you can return your Powerline

devices to their factory default Powerline encryption key of HomePlugAV.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XWN5001 Powerline 500 WiFi Access Point in the language / languages: English as an attachment in your email.

The manual is 3,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Netgear XWN5001 Powerline 500 WiFi Access Point Manual

Product: