Manual Netgear XWN5001 Powerline 500 WiFi Access Point (page 15 of 48) (English)

608404

Zoom out

Zoom in

1/48

Getting Started

Powerline 500 WiFi Access Point (XWN5001)

Method B: Use the WPS Button for Wireless Setup

You can use this method if you have a wireless router, or a modem router with a WPS (Wi-Fi

Protected Setup) button. The WPS button might be labeled WPS, or it could look similar to

or .

 To use the WPS button on your router or gateway to clone your existing wireless

network:

1. Pre

ss and hold the Security button on the XWN5001 (about 10 seconds) and release it.

The Wireless LED starts to blink.

2. Press the WPS but

ton on the wireless router or gateway.

When the Wireless LED stops blinking, t

he cloning is finalized and the XWN5001

recreates a WiFi access point with the same SSID and password as your router or

gateway.

You now have two WiFi networks with the same parameters (SSID and password). When

you a

re roaming in your house, your wireless client (laptop, tablet, or smartphone)

switches from one network (router or gateway) to the other (XWN5001), depending on

the signal quality.

Note: This method clones your wireless client and, at the same time,

secures the connection with a random password.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XWN5001 Powerline 500 WiFi Access Point in the language / languages: English as an attachment in your email.

The manual is 3,9 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Netgear XWN5001 Powerline 500 WiFi Access Point Manual

Product: