670512
12
Zoom out
Zoom in
Previous page
1/87
Next page
Hardware Setup
12
ProSAFE 10-Gigabit Ethernet Web Managed Switch
Check the Status Using the LEDs
After you connect power to the switch and the switch starts, LEDs on the front of the switch
indicate the status of the switch. When the switch is powered on, the Power LED lights solid
green.
The following table describes the RJ-45 and SFP+ slot LED designations. Each RJ-45 port
provides a left LED and a right LED. The SFP+ slot provides two LEDs.
Table 1. Port and system LEDs
LED Designation
Power Solid green . The device is powered on.
Off . Power is not supplied to the device.
Fan Solid yellow . A fan failure occurred.
Off . The fan is operating normally.
Speed and ACT LEDs for copper
ports
XS708Ev2: ports 1 to 7 and 8T
XS716E: ports 1 to 15 and 16T
Off. No link is established.
Solid green (left LED). A valid 10 Gbps link is established.
Blinking green (left LED). The port is transmitting or receiving packets
at 10 Gbps.
Solid yellow (right LED) . A valid 100/1000 Mbps link is established.
Blinking yellow (right LED). The port is transmitting or receiving traffic
at 100/1000 Mbps.
Link and ACT LEDs for SFP+
XS708Ev2: slot 8F
XS716E: slot 16F
10G LED:
Off . No SFP+ module is inserted or no module link is established.
Solid . A valid 10 Gbps link is established.
Blinking. The module is transmitting or receiving packets at 10 Gbps.
1G LED:
Off . No SFP or SFP+ module is inserted or no module link is
established.
Solid . A valid 1 Gbps link is established.
Blinking. The module is transmitting or receiving packets at 1 Gbps.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XS708Ev2 - ProSAFE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XS708Ev2 - ProSAFE in the language / languages: English as an attachment in your email.

The manual is 3,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XS708Ev2 - ProSAFE

Netgear XS708Ev2 - ProSAFE Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info