608408
7
Zoom out
Zoom in
Previous page
1/31
Next page
Chapter 1. Installation and Basic Configuration | 7
XAV5001 Powerline AV 500 Adapter User Manual
Installing Your Powerline AV 500 Adapter
Prepare for Installation:
1. Before you begin, verify the following:
Your Ethernet network is set up.
An Ethernet port is available on your router.
Your Internet connection is working.
An Ethernet port is available on each computer that will use a Powerline AV Ethernet
Adapter and is configured to work on your network. Usually, the default configuration
settings (TCP/IP and DHCP) are fine.
2. Familiarize yourself with the Powerline AV Ethernet Adapter.
The front panel has three lights: Power, Powerline, and Ethernet. The side panel has a
Security button, and a Reset button. The Ethernet port is located on the bottom of the
adapter. See Figure 2 on page 5.
3. Plan the location of your Powerline devices:
Use an electrical outlet that is not controlled by a wall
switch to avoid someone
unknowingly turning off the
power to the outlet.
Do not connect the Powerline AV Ethernet Adapter to
a power strip, extension cord, or surge protector as
this might prevent it from working correctly, or reduce
the network performance.
Avoid using the Powerline AV Ethernet Adapter in an
electrical outlet that is located near an appliance that
uses a lot of power, such as a washer or dryer, or a
refrigerator. This could potentially prevent the adapter
from working correctly, or reduce network
performance.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAVB5001 Powerline AV 500 Adapter Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAVB5001 Powerline AV 500 Adapter Kit in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAVB5001 Powerline AV 500 Adapter Kit

Netgear XAVB5001 Powerline AV 500 Adapter Kit Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info