608695

Netgear XAVB1501 Powerline AV plus 200 Adapter Kit Manual

13
Zoom out
Zoom in
Previous page
1/28
Next page
Chapter 2. Powerline Utility | 13
Powerline AV+ 200 Adapter Kit XAVB1501
The following table describes the features on the Device Settings Tab.
Table 1. Powerline Utility Device Settings Tab
Field or Button Description
Device Names This lists the Powerline devices detected on the network after the utility
completes a scan for devices. The device name is initially set by the utility, but
can be changed to reflect your specific adapter. For example, “Office” or “Master
Bedroom”.
Model This identifies the model number of the Powerline Adapter.
MAC Address The MAC address for the Powerline device. This is also on the product label,
which might not be visible when the device is plugged in.
Quality (Mbps) This indicates the type of traffic that can be handled smoothly and the link rate
for each Powerline device: HD Video, SD/DVD Video, or Data.
• HD Video. The device can handle high-definition video traffic smoothly. This
status will be shown if the transmit and receive link speed is greater than
80 Mbps.
• SD/DVD Video. The transmit and receive link speed is greater than 50 Mbps
or less than 80 Mbps.
• Data. The device cannot handle video data smoothly. This status will be
shown if the transmit or receive link speed is less than 50 Mbps.
LED On/Off button Enable or disable the LEDs for a Powerline device.The LEDs are enabled by
default.
Add a Device to a Powerline Network
If you are adding a device to a Powerline network, and the network encryption key has been
left at its default setting, all you need to do is plug the new device into a power outlet.
If the network encryption key has been customized, there are two ways to set the security:
• You can use the Security button to add the new device to your network. See Adding
Adapters to Your Network on page 6.
• You can use the XAVB1501 Powerline Utility to add the new device to the network, as
described in the following sections.
The procedure for setting the network encryption key depends on whether the computer
running the XAVB1501 Powerline Utility is connected directly to the new adapter (local) or is
connected to a different device in the Powerline network (remote).
To add a local Powerline device:
A local Powerline device is connected to your computer with an Ethernet cable.
1. Plug the new adapter into an available AC power outlet.
2. Connect the Ethernet cable that came with the adapter to the adapter’s Ethernet port and an
Ethernet port on the computer.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAVB1501 Powerline AV plus 200 Adapter Kit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAVB1501 Powerline AV plus 200 Adapter Kit in the language / languages: English as an attachment in your email.

The manual is 1,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAVB1501 Powerline AV plus 200 Adapter Kit

Netgear XAVB1501 Powerline AV plus 200 Adapter Kit Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info