608694

Netgear XAVB1301 AV 200 Mini Set Manual

20
Zoom out
Zoom in
Previous page
1/26
Next page
Troubleshooting
20
Powerline AV 200 Mini Adapter XAV1301
- The Ethernet cable is unplugged.
- The device connected through the Ethernet cable is turned off.
- The adapter is idle for 10 minutes.
The adapter returns to normal mode within 2 seconds once the Ethernet link is up.
Powerline LED
• Off. The Powerline devices cannot find each other. Make sure that the Powerline devices
are plugged into outlets with power, and that they use the same network encryption key.
- Move the Powerline device to a location closer to the computer or devices.
- If you have set up network security, make sure that all Powerline devices are using
the same encryption key.
- If the problem occurred after you changed the network encryption key, reset each
device to its factory default settings. Then you can customize the encryption key.
• Amber or red. Move the Powerline device to a closer location.
Ethernet LED Does Not Blink
There is no data traffic. Make sure that:
- Your router and modem are switched on.
- The adapter’s cable is securely connected to a router LAN port.
- The PC connected directly to the router can access the Internet.
- Press the Reset button on each Powerline device for 1 second to return the
Powerline adapter to its factory default settings.
If You Do Not See All Your Devices with the Powerline
Utility
If you click Refresh on the main screen of the Powerline Utility, and do not see all the devices
you expect, it could be that a Powerline adapter is in power saving mode or is set to use a
different encryption key.
• Power saving mode. You might see a message at the bottom of the screen regarding the
power saving feature. If a unit goes into power saving mode, the Powerline Utility does
not find it. Keeping a connected Ethernet cable plugged into the device keeps it active so
that it does not go in to power saving mode.
• Encryption keys are different. To fix this, you can do one of the following:
- Reset your Powerline adapters to their factory settings and default encryption key.
Then set the encryption for all of your Powerline adapters.
- Connect your computer to each Powerline device and set up the network encryption
key for one adapter at a time.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAVB1301 AV 200 Mini Set at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAVB1301 AV 200 Mini Set in the language / languages: English as an attachment in your email.

The manual is 0,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAVB1301 AV 200 Mini Set

Netgear XAVB1301 AV 200 Mini Set Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info