608710
30
Zoom out
Zoom in
Previous page
1/46
Next page
Troubleshooting
30
Powerline PassThru Adapter
Basic Functioning
After you plug in the Powerline device, the following sequence of events occurs:
1. The Power LED lights.
2. After approximately ten seconds, verify the following:
The Power LED is solid green. The device is powered on.
If the device is connected to a Powerline network, the Powerline LED is lit.
If the Powerline device is connected through the Ethernet port to a powered-on
Ethernet device, the Ethernet LED is lit.
Troubleshooting Buttons
The Factory Reset and Security buttons are on the side panel of the Powerline device.
Pressing the Factory Reset button longer than two seconds does not reset the device.
Pressing the Security button longer than two seconds does not activate security.
Troubleshooting LEDs
The LEDs indicate activity; you can use them for troubleshooting.
LEDs Are Off When the Powerline Device Is Plugged In
Make sure that power is supplied to the electrical outlet.
If power is supplied and the LEDs stay off, someone might have used NETGEAR genie to
turn off the LEDs. Use NETGEAR genie to check whether the LEDs are turned off. If they are
turned off, you can use NETGEAR genie to turn them back on. See
Turn LEDs Off or On on
page 24.
Power LED
If the Power LED is off, the adapter does not have electrical power. Try these troubleshooting
tips:
Make sure that power is supplied to the electrical outlet and that the Powerline device is
not plugged into an extension cord, power strip, or surge protector.
Press the Factory Reset button on the Powerline device for two seconds to return the
device to its factory default settings.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV6504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV6504 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info