608710
27
Zoom out
Zoom in
Previous page
1/46
Next page
Using NETGEAR genie
27
Powerline PassThru Adapter
Add a Device to the Powerline Network
If you are adding a device to your Powerline network and your network uses the default
encryption key, plug the new device into a power outlet.
If your Powerline network uses a private encryption key, you can set the security in one of
two ways:
Use the Security button to add the new device to your network. See Use the Security
Button to Set the Encryption Key on page 16.
Use NETGEAR genie to add the new device to your network, as described in the
following procedure.
To add a Powerline device to the Powerline network using NETGEAR genie:
1. Plug the Powerline device into a wall outlet near your computer for initial setup.
2. Connect the Powerline device to an Ethernet port on your computer using the Ethernet
cable that came with your adapter
.
3. Install NETGEAR genie on the computer
.
See Install NETGEAR genie on page 19.
4. Launch NETGEAR genie on the computer and navigate to the Powerline map.
See Powerline Map on page 20.
5. Click the Refresh icon and wait for NETGEAR genie to detect the new device.
6. Right-click the new device’s icon.
7. On the pop-up menu that displays, select Security.
8. Set the encryption key for the device.
See Set the Powerline Encryption Key on page 24.
Make sure that you enter the same encryption key that
your other Powerline devices use.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV6504 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV6504 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info