608698

Netgear XAV1601 Powerline AV plus 200 Nano Manual

10
Zoom out
Zoom in
Previous page
1/32
Next page
10 | Chapter 1. Installation and Basic Configuration
XAV1601 Powerline AV+ 200 Nano User Manual
Understanding Powerline Network Security
A Powerline network consists of two or more Powerline adapters using the same network
encryption key. Securing your network is crucial. By encrypting the information you send over
the Powerline XAV1601 Nano, you help to keep it secure from hackers. If you do not set up
security on your network, anyone nearby with a Powerline network can potentially use their
connection to gain access to your network and information you send over the Internet. This is
especially relevant in settings such as apartment buildings, office buildings, dorm rooms, and
other more populated areas.
Powerline devices connected to the same network must use an identical encryption key. The
security used by Powerline XAV1601 Nanos is similar to the SSID and encryption keys used
in wireless networks, but you do not need software to configure Powerline XAV1601 Nanos.
There are two ways to secure your Powerline network.
• Use the Security button located on the Powerline adapter to automatically generate a
random encryption key. See
Set the Encryption Key .
• Use the XAV1601 Powerline Utility to configure your Powerline network with an
encryption key that you specify. If you are already using Powerline or HomePlug devices
then you will need to use the Powerline Utility. If not already installed, the Powerline Utility
should be installed on your computer. See
Installing the Powerline Utility on page 12.
For information about using the XAV1601 Powerline Utility to configure Powerline security
or to prioritize Powerline network traffic using the Quality of Service (QoS) feature, see
Chapter 2.
Note: To return the XAV1601 Powerline AV+ 200 Nano to its factory
default settings, see Reset a Device to Factory Settings on page 17.
Set the Encryption Key
You can use the Security button to change the default encryption key and set a private
encryption key instead. The default encryption key is HomePlugAV.
Note: Before you change the Encryption key, you need to install the
Powerline adapters and get them up and running. Otherwise, they
might not be able to communicate with each other.
To set a private encryption key:
1. Verify that all the Powerline XAV1601 Nanos to be configured are plugged in to an
electrical outlet.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV1601 Powerline AV plus 200 Nano at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV1601 Powerline AV plus 200 Nano in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAV1601 Powerline AV plus 200 Nano

Netgear XAV1601 Powerline AV plus 200 Nano Installation Guide - German - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info