608669
32
Zoom out
Zoom in
Previous page
1/36
Next page
XAV101 Powerline AV Ethernet Adapter User Guide
3-2 Troubleshooting
v2.0, January 2009
Troubleshooting Tips
The following table lists problems and recommendations.
Problems After Changing Network Encryption Key
If your Powerline devices stopped communicating after you used the NETGEAR XAV101
Configuration Utility to change the network encryption key, proceed as follows:
Problem Recommendation
Power light is off. Make sure that power is supplied to the electrical outlet, and the Powerline
device is not plugged into an extension cord, power strip, or surge protector.
Powerline light is off. The devices cannot find each other. Make sure that the Powerline devices are
plugged into outlets with power, and that they use the same network encryption
key.
If you did not change the network encryption key, move the Powerline device
to a closer location.
If the problem occurred after you changed the network encryption key using
the XAV101 Configuration Utility on the CD, press the Reset button to return
the Powerline AV Ethernet Adapters to their default settings. If this fixes the
problem, see the User Manual for instructions about setting the network
encryption key.
Ethernet light is not
blinking.
There is no data traffic. Make sure that:
Your router and modem are switched on and that the Ethernet cable that came
in the box is connected to the Powerline adapter port and a router LAN port.
The PC connected directly to the router can access the Internet.
Problem using the reset
or Security button.
The reset and Security buttons are located on the side panel of the Powerline
AV Ethernet Adapter.
Pressing the reset button longer than 2 seconds will not reset the device.
Pressing the Security button longer than 2 seconds will not activate security.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV101 in the language / languages: English as an attachment in your email.

The manual is 1,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAV101

Netgear XAV101 Installation Guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info