608668

Netgear XAV1004 Powerline AV Ethernet Adapter Manual

2
Zoom out
Zoom in
Previous page
1/2
Next page
August 2010
This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste
Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union,
this product should be treated and recycled in accordance with the laws of your jurisdiction
implementing the WEEE Directive.
©2010 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of
NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or
registered trademarks of their respective holders. Information is subject to change without notice.
LED Descriptions
• Solid. The Ethernet port is linked, but there is no activity.
• Blinking. There is traffic between an Ethernet port and the Powerline
network.
• Off. There is no Ethernet connection.
• Solid. The adapter is connected to a Powerline network.
• Fast Blinking. The adapter is sending or receiving data.
• Slow Blinking. The adapter is going into power saving mode.
• Off. The adapter has not found any other compatible Powerline devices
using the same encryption key.
• Solid. The electrical power is on.
• Blinking. The adapter is in the process of resetting, power saving mode,
or security setup.
• Off. There is no electrical power.
Security Button and Reset Button
Use Push 'N' Secure to set the security on your Powerline adapters by pressing the
Security button. For more information, see the User Manual, located on your
Resource CD, and also available at http://www.NETGEAR.com/support.
WARNING!! Do not press the Security button on the Powerline AV Adapter until
installation is complete and the adapters have established a connection with each
other. Prior to using the Security button, the Ethernet cables should be plugged in
and the connected devices powered on to prevent the adapter from going into
power saving mode, which prevents the Security button from working. Press the
Reset button for 2 seconds to return the Powerline AV Adapter to its factory default
settings.
Ethernet
Powerline
The Pick A Plug feature lets you pick the electrical outlet with the strongest
link rate, indicated by the color displayed by the LED:
Green: Link rate > 80
Mbps (Best)
Orange: Link rate > 50
and < 80 Mbps
Red: Link rate < 50
Mbps
Power
Ethernet Port Traffic Priority (QoS)
When connecting devices to your Ethernet ports, be aware of the Quality of Service
(QoS) priorities assigned for each port:
• Port 1 (dark green) has high priority, and gives uninterrupted service to the
connected device. Devices you would connect to Port 1 include media servers,
storage devices, gaming consoles, video players, or internet telephones.
• Port 2 (light green) has medium priority. You can connect devices such as
gaming consoles, video players, or internet telephones to this port.
• Ports 3 and 4 (yellow) have low priority, and are best for networking data
devices, such as printers.
Troubleshooting Tips
• Make sure the Powerline devices are plugged into outlets with
power.
• Move the Powerline device to a closer location.
• If you have set network security, make sure that all Powerline
devices are using the same encryption key.
• Reset the devices to factory default settings. Refer to the User
Manual for instructions.
• Make sure that your router and modem are on and working correctly.
• Make sure that the Ethernet cables are working and securely
plugged into the devices.
• Reset the devices to factory default settings. Refer to the User
Manual for instructions.
Power LED is off. Make sure that power is supplied to the electrical outlet, and that the
Powerline devices are not plugged into an extension cord, power strip,
or surge protector.
Powerline LED is
off.
Powerline LED is
red.
The color of the Powerline LED indicates the speed of the Powerline
link. If the LED is red, the speed is less than 40 Mbps. Switch to
another electrical outlet until the LED displays solid green.
Ethernet LED is
not blinking.
Technical Support
Thank you for selecting NETGEAR products.
After installing your device, locate the serial number on the label of your product and
use it to register your product at http://www.NETGEAR.com/register. Registration is
required before you can use the telephone support service. Registration via our
website is strongly recommended.
Go to http://kbserver.netgear.com for product updates and Web support.
For additional information about setting up, configuring, and using your Home
Theater Internet Connection Kit, see the User Manual.
For complete DoC please visit the NETGEAR EU Declarations of Conformity
website at: http://kb.netgear.com/app/answers/detail/a_id/11621/
WARNING!! Do not plug any Powerline device into a power strip.
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear XAV1004 Powerline AV Ethernet Adapter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear XAV1004 Powerline AV Ethernet Adapter in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Netgear XAV1004 Powerline AV Ethernet Adapter

Netgear XAV1004 Powerline AV Ethernet Adapter User Manual - English - 34 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info