519644

Netgear WPN824v3 Manual

69
Zoom out
Zoom in
Previous page
1/104
Next page
RangeMax Wireless Router WPN824v3 User Manual
Advanced Settings and Features 5-13
v1.0, January 2008
In this case you must define a static route, telling your router that 134.177.0.0 should be accessed
through the ISDN router at 10.1.1.100. The static route would look like
Figure 5-7.
In this example:
• The Destination IP Address and IP Subnet Mask fields specify that this static route applies
to all 134.177.x.x addresses.
•The Wireless Router IP Address field specifies that all traffic for these addresses should be
forwarded to the ISDN router at 10.1.1.100.
•A Metric value of 1 works because the ISDN router is on the LAN.
This represents the number of routers between your network and the destination. This is a
direct connection, so it is set to 1.
• Private is selected only as a precautionary security measure in case RIP is activated.
Configuring Static Routes
You can add static routes, and view or change existing static routes from the Static Routes screen.
To add or edit a static route:
1. Log in to the wireless router at its default LAN address of http://192.168.0.1 with its default
user name of admin and default password of password, or using whatever user name,
password, and LAN address you have chosen for the wireless router.
2. On the main menu, select Static Routes under Advanced. The Static Routes screen displays:
Figure 5-7
Existing static routes are shown in the Static Routes table.
… 69 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Netgear WPN824v3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Netgear WPN824v3 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info